Abstract
The purpose of this chapter is to introduce you to the kinematics of limbs. Kinematics is the study of movements without regard to the forces and torques that produce them. In essence, it is the fundamental description of the articulations and motions of which a limb is capable. This chapter serves as the foundation upon which we can build a common conceptual language, and begin to discuss limb function in the context of mechanics.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
In biological systems, joint kinematics arise from the interaction of the contact of bony articulating surfaces held by ligamentous structures. A joint is, therefore, a complex system whose kinematics can be load dependent [1].
- 2.
We use the term torque-driven instead of joint-driven because this is more common in the robotics literature.
- 3.
In robotics, the term manipulator is used synonymously with robot, robotic arm, robotic limb, or any other mechanism that is actuated and controlled.
- 4.
Actuator is the generic engineering term for a motor or some other device that produces forces or mechanical work.
- 5.
A note about typesetting conventions set forth in Appendix A. Capital letters as superscripts or subscripts (italicized or not) like M or N indicate extremes of ranges. Thus the endpoint of a limb is assigned frame N, and dimensionality of a vector or matrix are \(\mathbf {v} \in \mathbb {R}^N\) or \(A \in \mathbb {R}^{M \times N}\), respectively. Indices that are lowercase italicized letters like n, i, or j signify a number within a range. The letter M need not stand for muscles, or n for an intermediate frame of reference. They are simply letters to indicate dimensions and indices, and change with the context of the material. Vectors are lowercase letters typeset as \(\mathbf {v}\), which can be also specified to be expressed in a given frame of reference, say frame 0, as \(\mathbf {v}_{0}\). Or if the start and end of a vector are specified, it will be typeset as \(\mathbf {p}_{0,N}\). Matrices are written as italicized upper case letters, such at the matrix T, which can also carry subscripts and superscripts depending on their meaning like \(T_{\textit{base}}^{\textit{endpoint}}\). I use lowercase italics for general scalars (i.e., numbers).
References
F.J. Valero-Cuevas, C.F. Small, Load dependence in carpal kinematics during wrist flexion in vivo. Clin. Biomech. 12, 154–159 (1997)
Y. Bei, B.J. Fregly, Multibody dynamic simulation of knee contact mechanics. Med. Eng. Phys. 26(9), 777–789 (2004)
H. Nagerl, J. Walters, K.H. Frosch, C. Dumont, D. Kubein-Meesenburg, J. Fanghanel, M.M. Wachowski, Knee motion analysis of the non-loaded and loaded knee: a re-look at rolling and sliding. J. Physiol. Pharmacol. 60, 69–72 (2009)
C.E. Wall, A model of temporomandibular joint function in anthropoid primates based on condylar movements during mastication. Am. J. Phys. Anthropol. 109(1), 67–88 (1999)
F.J. Valero-Cuevas, H. Hoffmann, M.U. Kurse, J.J. Kutch, E.A. Theodorou, Computational models for neuromuscular function. IEEE Rev. Biomed. Eng. 2, 110–135 (2009)
R.M. Murray, Z. Li, S.S. Sastry, A Mathematical Introduction to Robotic Manipulation (CRC, Boca Raton, 1994)
T. Yoshikawa, Foundations of Robotics: Analysis and Control (MIT Press, Cambridge, 1990)
F.J. Valero-Cuevas, A mathematical approach to the mechanical capabilities of limbs and fingers. Adv. Exp. Med. Biol. 629, 619–633 (2009)
F.E. Zajac, Muscle and tendon: properties, models, scaling, and application to biomechanics and motor control. Crit. Rev. Biomed. Eng. 17(4), 359–411 (1989)
V.J. Santos, F.J. Valero-Cuevas, Reported anatomical variability naturally leads to multimodal distributions of Denavit-Hartenberg parameters for the human thumb. IEEE Trans. Biomed. Eng. 53, 155–163 (2006)
F.J. Valero-Cuevas, M.E. Johanson, J.D. Towles, Towards a realistic biomechanical model of the thumb: the choice of kinematic description may be more critical than the solution method or the variability/uncertainty of musculoskeletal parameters. J. Biomech. 36, 1019–1030 (2003)
O. Bottema, B. Roth, Theoretical Kinematics (Dover Publications, New York, 2012)
Wikipedia contributors, Basis vectors, Wikipedia, The Free Encyclopedia. https://en.wikipedia.org/wiki/Screw_theory. Accessed 12 Feb 2015
T. Yoshikawa, Translational and rotational manipulability of robotic manipulators, in 1991 International Conference on Industrial Electronics, Control and Instrumentation (IEEE, 2002), pp. 1170–1175
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer-Verlag London
About this chapter
Cite this chapter
Valero-Cuevas, F.J. (2016). Limb Kinematics. In: Fundamentals of Neuromechanics. Biosystems & Biorobotics, vol 8. Springer, London. https://doi.org/10.1007/978-1-4471-6747-1_2
Download citation
DOI: https://doi.org/10.1007/978-1-4471-6747-1_2
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-6746-4
Online ISBN: 978-1-4471-6747-1
eBook Packages: EngineeringEngineering (R0)