Abstract
In present power system, the engineers face variety of challenges in planning, construction and operation. In some of the problems, the engineers need to use managerial talents. In system design or upgrading the entire system into automatic control instead of slow response of human operator, the engineers need to exercise more technical knowledge and experience. It is principally the engineer’s ability to achieve the success in all respect and provide the reliable and uninterrupted service to the customers. This chapter covers some important areas of the traditional power system that helps engineers to overcome the challenges. It emphasizes the characteristics of the various components of a power system such as generation, transmission, distribution, protection and SCADA system. During normal operating conditions and disturbances, the acquired knowledge will provide the engineers the ability to analyse the performance of the complex system and execute future improvement.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
(2003) Network Planning Criteria—Power and Water Corporation, http://www.powerwater.com.au/__data/assets/pdf_file/0009/3501/network_planning_criteria_0304.pdf
Kimbark EW (1971) Direct current transmission. Wiley, NY
Uhlman E (1975) Power transmission by direct current. Springer, Berlin
Arrillaga J (1983) High voltage direct current transmission, IEE power engineering series, London
Song YH, Johns AT (1999) Flexible ac transmission systems (FACTS), IEE Power Engineering Series 30, London
Hingorani NG, Gyugyi L (2000) Understanding FACTS: concepts and technology of flexible AC transmission systems. IEEE Press, Piscataway
Rudervall R, Charpentier J et al. (2000) High voltage direct current (HVDC) transmission systems technology review paper. Energy week 2000
Kueck JD, Kirby BJ et al. (2004) Measurement practices for reliability and power quality. Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6285
Heydt G (1991) Electric Power Quality. Stars in a Circle Publications
McGranaghan M, Mueller D (1885) Effects of voltage sags in process industry applications. IEEE/KTH Power Tech Conference. Stockholm, Sweden, pp 4–10
Bendre A, Divan D et al. (2004) Equipment failures caused by power quality disturbances. Industry applications conference, 2004. 39th IAS annual meeting. Conference record of the 2004 IEEE. vol. 1
Gonen T (1986) Electric power distribution system engineering. McGraw Hill, New York
Mithulananthan N, Salama M et al (2000) Distribution system voltage regulation and var compensation for different static load models. Int J Electr Eng Educ 37(4):384–395
Concordia C, Ternoshok M (1967) Generator excitation systems and power system performance. IEEE summer power meeting. Portland, Oreg: Paper 31 CP 67–536
Engineers CS (1950) Electrical transmission and distribution reference book. Westinghouse Electric Corporation, Pittsburgh
Chambers GS, Rubenstein AS et al. (1961) Recent developments in amplidyne regulator excitation systems for large generators. AlEE Trans PAS-80:1066–1072
Barnes HC, Oliver JA et al. (1968) Alternator-rectifier exciter for Cardinal Plant. IEEE Trans PAS-87:1189–1198
Report IC (1969) Proposed excitation system definitions for synchronous machines. IEEE Trans Power Apparatus Syst PAS-88(8):1248–1258
Blackburn JL (1987) Protective relaying—principles and practice. Marcel Dekker, Inc., New York
GeneralElectricCompany (1987) Protective relays application guide/ GEC measurements, Stafford, engineering: GEC Measurements, The General Electric Company (Great Britain)
Elmore WA (2004) Protective relaying—theory and applications. Marcel Dekker, Inc, NY
Gaushell DJ, Darlington HT (1987) Supervisory control and data acquisition. Proceedings of the IEEE
Sciacca SC, Block WR (1995) Advanced SCADA concepts. IEEE Comput Appl Power 8(1):23–28
Ackerman WJ (1999) Substation automation and the EMS. Proceedings IEEE transmission and distribution conference
Eggenberger MA (1960) A simplified analysis of the no-load stability of mechanical-hydraulic speed control systems for steam turbines, ASME Winter annual meeting New York: Paper 60-WA-34
Islam MF, Kamruzzaman J (2006) Implementation of ANN based Tap-changer control of transformers in transmission and distribution system. Australasian universities power engineering conference (AUPEC’ 2006), Melbourne, Victoria
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Md Fakhrul Islam, Oo, A.M.T., Chowdhury, S.H. (2013). The Traditional Power Generation and Transmission System: Some Fundamentals to Overcome Challenges. In: Ali, A. (eds) Smart Grids. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-5210-1_1
Download citation
DOI: https://doi.org/10.1007/978-1-4471-5210-1_1
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-5209-5
Online ISBN: 978-1-4471-5210-1
eBook Packages: EnergyEnergy (R0)