Abstract
This work discusses the limitations of the existing feature-based computer systems for concurrent and collaborative engineering, including the loss of engineering intent, “hard-coding” feature semantics, unsatisfactory compatibility, inconsistency, and limited scalability for information sharing among different CAx systems. Such limitations create chaos for inevitable engineering changes within and across different product development stages. The authors introduces a unified feature modeling system to provide the required flexibility and scalability in view of the modern complex engineering. The fundamental mechanisms that enable the unified feature modeling scheme are presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bettig B, Hoffmann CM (2011) Geometric constraint solving in parametric computer-aided design. ASME Trans J Comput Inf Sci Eng 11:021001–021009
Bidarra R, Bronsvoort WF (1996) Towards classification and automatic detection of feature interactions. In: Proceedings of the dedicated conference on mechatronics, 29th ISATA. Florence, Italy
Bidarra R, Bronsvoort WF (2000) Semantic feature modeling. Comput Aided Des 32:201–225
Bidarra R, de Kraker KJ, Bronsvoort WF (1998) Representation and management of feature information in a cellular model. Comput Aided Des 30:301–313
Bidarra R, Madeirab J, Neelsa WJ, Bronsvoort WF (2005) Efficiency of boundary evaluation for a cellular model. Comput Aided Des 37:1266–1284
Bronsvoort WF, Noort A (2004) Multiple-view feature modelling for integral product development. Comput Aided Des 36:929–946
Chen G, Ma YS, Thimm G, Tang SH (2004) Unified feature based integration of design and process planning. In: Hinduja S (ed) Proceedings of the 34th international MATADOR conference, Springer, London
Chen G, Ma YS, Thimm G, Tang SH (2004) Unified feature modeling scheme for the integration of CAD and Cax. Comput Aided Des Appl 1:595–601
Chen G, Ma YS, Ming XG, Thimm G, Lee SG, Khoo LP, Tang SH, Lu WF (2005) A unified feature modeling scheme for multi-applications in PLM. In: Sobolewski M, Ghodous P (eds) Proceedings of the 12th ISPE international conference on concurrent engineering (CE2005): Research and applications -next generation concurrent engineering: smart and concurrent integration of product data, services, and control strategies. ISPE, Dallas
Chen G, Ma YS, Thimm G, Tang SH (2005) Knowledge-based reasoning in a unified feature modeling scheme. Comput Aided Des Appl 2:173–182
Chen G, Ma YS, Thimm G, Tang SH (2006) Associations in a unified feature modeling scheme. ASME Trans J Comput Inf Sci Eng 6:114–126
Chen G, Ma YS, Thimm G, Tang SH (2006) Using cellular topology in a unified feature modeling scheme. Comput Aided Des Appl 3:89–98
Chen JY, Ma YS, Wang CL, Au CK (2005) Collaborative design environment with multiple CAD systems. Comput Aided Des Appl 2:367–376
D’Souza DF, Wills AC (1999) Objects, components, and frameworks with UML—the CatalysisSM approach. Addison Wesley Longman, Boston
Dankwort CW, Weidlich R, Guenther B, Blanrock JE (2004) Engineers’ Cax education: it’s not only CAD. Comput Aided Des 36:1339–1450
de Kraker KJ, Dohmen M, Bronsvoort WF (1997) Maintaining multiple views in feature modeling. In: Proceedings of the fourth ACM symposium on solid modeling and applications (SMA 97), ACM, New York
de Kraker KJ, Dohmen M, Bronsvoort WF (1997) Multiple-way feature conversion: opening a view. In: Pratt M, Siriram R, Wozny M (eds) Product modeling for computer integrated design and manufacture. Chapman and Hall, London
Fortier PJ (1997) Database systems handbook. McGraw-Hill, New York
Forbus KD, de Kleer J (1993) Building problem solvers. MIT Press, Cambridge
Fudos I (1995) Constraint solving for computer aided design. PhD Thesis, Purdue University
Gao XS, Lin Q, Zhang GF (2006) A C-tree decomposition algorithm for 2D and 3D geometric constraint solving. Comput Aided Des 38:1–13
Geelink R, Salomons OW, Van Slooten F, Van Houten FJAM, Kals HJJ (1995) Unified feature definition for feature based design and feature based manufacturing. In: Proceedings of the 15th annual international computers in engineering conference and the 9th annual ASME engineering database symposium
Hoffmann C, Joan-Arinyo R (2002) Parametric modeling. In: Farin G, Hoschek J, Kim MS (eds) Handbook of CAGD. Elsevier, Amsterdam
Hower W, Graf WF (1996) A bibliographical survey of constraint-based approaches to CAD, graphics, layout, visualization, and related topics. Knowl Based Syst 9:449–464
Joan-Arinyo R, Soto-Riera A, Vila-Marta S, Vilaplana-Pasto J (2003) Transforming an under-constrained geometric constraint problem into a well-constrained one. ACM Solid Modeling 2003 (SM’03), Seattle, Washington, USA
Joan-Arinyo R, Tarrés-Puertas M, Vila-Marta S (2009) Tree decomposition of geometric constraint graphs based on computing graph circuits. In: Proceedings of 2009 SIAM/ACM joint conference on geometric and physical modeling
Kim KY, Manley DG, Yang HJ (2006) Ontology-based assembly design and information sharing for collaborative product development. Comput Aided Des 38:1233–1250
Law HW, Tam HY, Chan AHS, Hui IK (2001) Object-oriented knowledge-based computer-aided process planning system for bare circuit boards manufacturing. Comput Ind 45:137–153
Luger GF (2002) Artificial intelligence structures and strategies for complex problem solving, 4th edn. Addison Wesley, England
Ma YS (2009) Towards semantic interoperability of collaborative engineering in oil production industry. Concurrent Eng 17:111–119
Ma YS, Britton GA, Tor SB, Jin LY (2007) Associative assembly design features: concept, implementation and application. Int J Adv Manuf Technol 32:434–444
Ma YS, Tang SH, Chen G (2007) A fine-grain and feature-oriented product database for collaborative engineering. In: Li WD, Ong SK, Nee AYC, McMahon CA (eds) Collaborative product design and manufacturing methodologies and applications. Springer, England
Ma YS, Chen G, Thimm G (2008) Change propagation algorithm in a unified feature modeling scheme. Comput Ind 59:110–118
Ma YS, Chen G, Thimm G (2008) Paradigm shift: unified and associative feature-based concurrent and collaborative engineering. J Intell Manuf 19:626–641
Ma YS, Chen G, Thimm G (2009) Fine grain feature associations in collaborative design and manufacturing—a new modeling approach. In: Wang LH, Nee AYC (eds) Collaborative design and planning for digital manufacturing. Springer, London
Ma YS, Tang SH, Au CK, Chen JY (2009) Collaborative feature-based design via operations with a fine-grain product database. Comput Ind 60:381–391
Mackerle J (2004) Object-oriented programming in FEM and BEM: a bibliography (1990–2003). Adv Eng Softw 35:325–336
Maffezzoni C, Ferrarini L, Carpanzano E (1999) Object-oriented models for advanced automation engineering. Control Eng Pract 7:957–968
Marquardt W (1992) An object-oriented representation of structured process models. Comput Chem Eng 16(Suppl 1):S329–S336
Mittra SS (1991) Principles of relational database systems. Prentice Hall, Englewood Cliffs
Noort A, Hoek GFM, Bronsvoort WF (2002) Integrating part and assembly modeling. Comput Aided Des 34:899–912
Ovtcharova J, Jasnoch U (1994) Featured-based design and consistency management in CAD applications: a unified approach. Adv Eng Softw 20:65–73
Penoyer JA, Burnett G, Fawcett DJ, Liou SY (2000) Knowledge based product life cycle systems: principles of integration of KBE and C3P. Comput Aided Des 32:311–320
Ramakrishnan R, Gehrke J (2000) Database management systems. McGraw-Hill, Boston
Shah JJ (1988) Feature transformations between application-specific feature spaces. Comput Aided Eng J 5:247–255
Shah JJ (1991) Assessment of features technology. Comput Aided Des 23:331–343
Shah JJ, Mantyla M (1995) Parametric and feature-based CAD/CAM concepts, techniques and applications. Wiley-Interscience, New York
Shirinivas SG, Vetrivel S, Elango NM (2010) Applications of graph theory in computer science: an overview. Int J Eng Sci Tech 2:4610–4621
Smit MS, Bronsvoort WF (2009) Integration of design and analysis models. Comput Aided Des Appl 6:795–808
Tang SH (2007) The investigation for a feature-oriented product database. PhD thesis, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore
Tang SH, Ma YS, Chen G (2004) A feature-oriented database framework for seb-based CAx applications. Comput Aided Des Appl 1:117–125
Tornincasa S, Monaca FD (2010) The future and the evolution of CAD. In: 14th international research/expert conference: trends in the development of machinery and associated technology, Mediterranean Cruise
Turk Z (1993) Object-oriented modeling and integrated CAD. Autom Constr 1:323–337
Uddin MM, Ma YS (2011) Towards a feature-based and fine-grain product repository for heterogeneous computer-aided systems. Enabling manufacturing competitiveness and economic sustainability (4th CARV2011 Proceedings). Springer, London
Wang Q, Zhu JY et al (1995) An intelligent design environment for conceptual process design. Eng Appl Artif Intell 8:115–127
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Cheng, Z., Tang, SH., Chen, G., Ma, YS. (2013). Unified Feature Paradigm. In: Ma, Y. (eds) Semantic Modeling and Interoperability in Product and Process Engineering. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-5073-2_5
Download citation
DOI: https://doi.org/10.1007/978-1-4471-5073-2_5
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-5072-5
Online ISBN: 978-1-4471-5073-2
eBook Packages: EngineeringEngineering (R0)