Abstract
Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste streams in modern societies. In the past decade, disassembly of WEEE to support remanufacturing and recycling has been growingly adopted by industries. With the increasing customization and diversity of Electrical and Electronic Equipment (EEE) and more complex assembly processes, full disassembly of WEEE is rarely an ideal solution due to high disassembly cost. Selective disassembly, which prioritizes operations for partial disassembly according to the legislative and economic considerations of specific stakeholders, is becoming an important yet still challenging research topic in recent years. In this chapter, a Particle Swarm Optimization (PSO)-based selective disassembly planning method embedded with customizable decision-making models and a novel generic constraint handling algorithm has been developed. With multi-criteria decision making models, the developed method is flexible to handle WEEE to meet the various requirements of stakeholders. Based on the generic constraint handling and intelligent optimization algorithms, the research is capable to process complex constraints and achieve optimized selective plans. Practical cases on Liquid Crystal Display (LCD) televisions have been used to verify and demonstrate the effectiveness of the research in different application scenarios. A distributed environment to deploy the service for remote access and control has been designed to support collaborative work.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Jovane F, Yoshikawa H, Alting L, Boer CR, Westkamper E, Williams D, Tseng M, Seliger G, Paci AM (2008) The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Ann Manuf Technol 75:641–659
Walther G, Steinborn J, Spengler TS, Luger T, Herrmann C (2010) Implementation of the WEEE-directive—economic effects and improvement potentials for reuse and recycling in Germany. Int J Adv Manuf Technol 47:461–474
Hicks C, Dietmar R, Eugster M (2005) The recycling and disposal of electrical and electronic waste in China—legislative and market responses. Environ Impact Assess Rev 25:447–459
Kopacek B, Kopacek P (1999) Intelligent disassembly of electronic equipment. Annu Rev Control 23:165–170
Duflou JR, Seliger G, Kara S, Umeda Y, Ometto A, Willems B (2008) Efficiency and feasibility of product disassembly: a case-based study. CIRP Ann Manuf Technol 57:583–600
Kernbaum S, Heyer S, Chiotellis S, Seliger G (2009) Process planning for IT-equipment remanufacturing. CIRP J Manuf Sci Technol 2:13–20
Hatcher GD, Ijomah WL, Windmill JFC (2011) Design for remanufacturing: a literature survey and future research needs. J Clean Prod 19:2004–2014
Mayers CK (2007) Strategic, financial, and design implications of extended producer responsibility in Europe: a producer case study. J Ind Ecol 11:113–131
Sander K, Schilling S, Tojo N, van Rossem C, Vernon J, George C (2007) The producer responsibility principle of the WEEE directive. DG ENV. Study Contract N° 07010401/2006/449269/MAR/G4. https://ec.europa.eu/environment/waste/weee/pdf/final_rep_okopol.pdf. Accessed on 01 July 2012
Giuntini R, Gaudette K (2003) Remanufacturing: the next great opportunity for boosting US productivity. Business Horizons, November–December 2003, pp 41–48
Kara S, Pornprasitpol P, Kaebernick H (2006) Selective disassembly sequencing: a methodology for the disassembly of end-of-life products. CIRP Ann Manuf Technol 55(1):37–40
Masui K, Mizuhara K, Ishii K, Rose C (1999) Development of products embedded disassembly process based on end-of-life strategies. In: Proceedings of the EcoDesign’99: 1st international symposium on environmentally conscious design and inverse manufacturing, Tokyo, pp 570–575
Chiodo JD, Harrison DJ, Billett EH (2001) An initial investigation into active disassembly using shape memory polymers. Proc Inst Mech Eng Part B: J Eng Manuf 215(5):733–741
Jones N, Harrison D, Billett E, Chiodo J (2004) Electrically self-powered active disassembly. Proc Inst Mech Eng Part B: J Eng Manuf 218(7):689–697
Braunschweig A (2004) Automatic disassembly of snap-in joints in electromechanical devices. In: Proceedings of the 4th international congress mechanical engineering technologies’04, Varna, pp 48–56
Hussein H, Harrison D (2008) New technologies for active disassembly: using the shape memory effect in engineering polymers. Int J Prod Dev 6(3/4):431–449
Ijomah WL, Chiodo JD (2010) Application of active disassembly to extend profitable remanufacturing in small electrical and electronic products. Int J Sustain Eng 3(4):246–257
Sundin E, Lindahl M, Ijomah WL (2009) Product design for product/service systems—design experiences from Swedish industry. J Manuf Technol Manag 20(5):723–753
Dindarian A, Gibson AAP, Quariguasi-Frota-Neto J (2012) Electronic product returns and potential reuse opportunities: a microwave case study in the United Kingdom. J Clean Prod 32:22–31
Santochi M, Dini G, Failli F (2002) Computer aided disassembly planning: state of the arts and perspectives. CIRP Ann Manuf Technol 51(2):507–529
Lambert AJD (2002) Determining optimum disassembly sequences in electronic equipment. Comput Ind Eng 43(3):553–575
Kuo TC (2012) Waste electronics and electrical equipment disassembly and recycling using Petri net analysis: considering the economic value and environmental impacts. Comput Ind Eng (to appear)
Renteria A, Alvarez E, Perez J, Pozo D (2011) A methodology to optimize the recycling process of WEEE: case of television sets and monitors. Int J Adv Manuf Technol 54:789–800
Ryan A, O’Donoghue L, Lewis H (2011) Characterising components of liquid crystal displays to facilitate disassembly. J Clean Prod 19:1066–1071
Li WD, Ong SK, Nee AYC (2002) Hybrid genetic algorithm and simulated annealing approach for the optimization of process plans for prismatic parts. Int J Prod Res 40(8):1899–1922
Li WD, McMahon CA (2007) A simulated annealing-based optimization approach for integrated process planning and scheduling. Int J Comput Integr Manuf 20(1):80–95
Kennedy J, Eberhart R (1995) Particle swarm optimization. In: Proceedings of IEEE international conference on neural networks IV, pp 1942–1948
Reddy SVB, Shunmugam MS, Narendran TT (1999) Operation sequencing in CAPP using genetic algorithm. Int J Prod Res 37:1063–1074
Acknowledgments
This research was carried out as a part of the GREENet and CASES projects which are supported by a Marie Curie International Research Staff Exchange Scheme Fellowship within the 7th European Community Framework Programme under the grant agreement No 269122 and No 294931. The chapter reflects only the authors’ views and the Union is not liable for any use that may be made of the information contained therein.
The authors would also appreciate Mr Qiang Peng, the Technical Director of the Guangdong Changhong Electronics Company, Ltd., and his team for their strong support during the project in terms of technical consultancy/discussions and raw data providing/explanations.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Li, W., Xia, K., Lu, B., Chao, K.M., Gao, L., Yang, J.X. (2013). A Distributed Service of Selective Disassembly Planning for Waste Electrical and Electronic Equipment with Case Studies on Liquid Crystal Display. In: Li, W., Mehnen, J. (eds) Cloud Manufacturing. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-4935-4_2
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4935-4_2
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-4934-7
Online ISBN: 978-1-4471-4935-4
eBook Packages: EngineeringEngineering (R0)