Advertisement

The Basic Mechanical Properties and Experimental Verification for Hot Forming Steel

  • Ping Hu
  • Ning Ma
  • Li-zhong Liu
  • Yi-Guo Zhu
Chapter
Part of the Springer Series in Advanced Manufacturing book series (SSAM)

Abstract

Metal is the most important material in modern industry, widely used in agriculture, industry, national defense industry, and other departments. Since the selection of materials for most mechanical equipments is based on its mechanical performance, the mechanical properties of metals should be first known. This section will focus on the plasticity and deformation resistance of metal materials and their influencing factors.

Keywords

High Strength Steel Deformation Rate Dual Phase Steel Trip Steel Form Limit Diagram 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Ning MA, Ping HU, Shuji ZAI, Wei GUO (2009) Technology and application of hot forming of high strength steel. Automobile Technol Mater 10(12):28–30 (In Chinese) Google Scholar
  2. 2.
    Ning MA, Ping HU, Wei GUO (2010) Experiments and analysis of relations among heat, stress and transformation of boron steel for hot forming. Trans Mater Heat Treat 12(5):33–40 (In Chinese)Google Scholar
  3. 3.
    Frank J, Mark E, Mohan R et al (2009) Evolution of phases, microstructure, and surface roughness during heat treatment of aluminized low carbon steel. Metall Mater Trans A 6:1554–1563Google Scholar
  4. 4.
    Fan DW, Kim MS (2008) Physical metallurgy of hot press forming ultra high strength steel. Mater Sci Technol 22(4):1710–1721Google Scholar
  5. 5.
    Lorenz D, Roll K (2004) Simulation of hot stamping and quenching of boron alloyed steel. In: 7th International ESAFORM Conference on material forming, 28–30 Apr 2004, Trondheim, Norway, pp 659–662Google Scholar
  6. 6.
    Kapadia BM, Brown RM, Murphy WJ (1968) The influence of nitrogen, titanium, and zirconium on the boron hardenability effect in constructional alloy steels. Trans Metall Soc AIME 242(8):1689–1694Google Scholar
  7. 7.
    Eriksson M, Oldenburg M, Somani MC, Karjalainen LP (2002) Testing and evaluation of material data for analysis of forming and hardening of boron steel components. Modell Simul Mater Sci Eng 10:277–294CrossRefGoogle Scholar
  8. 8.
    Ning MA, Ping HU, Kangkang YAN, Wei GUO, Xiangbin MENG, Shuji ZHAI (2010) Research on boron steel for hot forming and its application. J Mech Eng 46(14):177–181 (In Chinese)Google Scholar
  9. 9.
    Ma N, Hu P, Shen GZ et al (2010) Modeling, testing and numerical simulation on hot forming. AIP Conference Proceedings, Plenary lecture of NUMIFORM2010, pp 18–27Google Scholar
  10. 10.
    Ma N, Hu P, Guo W et al (2009) Feasible methods applied to the design and manufacturing process of hot forming. IDDRG2009 conference, Golden, CO USA, pp 835–843Google Scholar
  11. 11.
    Grange K, Kiefer J (1941) The transformation of austenite by continuous cooling. Trans ASM 29:85–115Google Scholar
  12. 12.
    Zhuang L, Zhaoji W, Jingzhi W et al (1996) The numerical simulation of heat treatment process. Science Press, Beijing (In Chinese)Google Scholar
  13. 13.
    Garcia Aranda L, Chastel Y, Fernández Pascual J, Dal Negro T (2002) Experiments and simulation of hot stamping of quenchable steels. Adv Technol Plast 2:1135–1140Google Scholar
  14. 14.
    Naderi M (2007) Hot stamping of ultra high strength steels. Doctoral Theses, RWTH AachenGoogle Scholar
  15. 15.
    Mingtu MA (2008) Car lightweight and high strength steel advanced processing forming technique. Proceedings of international seminar on automobile body steel technology, 2008, pp 28–45 (In Chinese)Google Scholar
  16. 16.
    Li WANG, Xiong fei YANG, Jiang xin LU (2006) Development of high strength steel sheets for lightweight automobile. Gangtie 41(9):1–8 (In Chinese)Google Scholar
  17. 17.
    Weili XU, Shurong GUAN, Jian AI (2009) Key equipment and core technology of hot stamping. World Iron Steel 2:30–33 (In Chinese)Google Scholar
  18. 18.
    Keeler Stuart P (1968) Circular grid system-a valuable aid for evaluating sheet metal formability. SAE Trans 680092: 371–379Google Scholar
  19. 19.
    Goodwin Gorton M (1968) Application of strain analysis to sheet metal forming problems in the press shop. SAE Trans 680093:380–387Google Scholar
  20. 20.
    Nemat-Nasser S (1999) Experimentally-based micromechanical modeling of metal plasticity with homogenization form micro-to-macro-scale properties. In: IUTAM symposium on micro- and macrostructural aspects of thermoplasticity, pp 101–113Google Scholar
  21. 21.
    Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain-rates and high temperature. In: The 7th symposium on ballistic, pp 541–547Google Scholar
  22. 22.
    Tong L, Stahel S, Hora P (2005) Modeling for the FE simulation of warm metal forming processes. In: The 6th international conference and workshop on numerical simulation of 3D sheet metal forming processes, pp 625–629Google Scholar
  23. 23.
    Ghosh A, Kikuchi N (1988) Finite element formulation for the simulation of hot sheet metal forming processes. Int J Eng Sci 26(2):143–161MATHCrossRefGoogle Scholar
  24. 24.
    Molinari AM, Ravichandran G (2005) Constitutive modeling of the high-strain-rate deformation in metals based on the evolution of an effective microstructural length. Mech Mater 37:737–752CrossRefGoogle Scholar
  25. 25.
    Merklein M, Lechler J (2008) Determination of material and process characteristics for hot stamping processes of quenchenable ultra high strength steels with respect to a FE-based process design. SAE world congress: innovations in steel and applications of advanced high strength steels for automotive structures, paper no. 2008-0853Google Scholar
  26. 26.
    Turetta A, Ghiotti A, Bruschi S (2006) Investigation of 22MnB5 formability in hot stamping operations. J Mater Process Technol 177:396–400CrossRefGoogle Scholar
  27. 27.
    Hoffmann H, So H, Steinbeiss H (2007) Design of hot stamping tools with cooling system. Ann CIRP 56(1):269–272CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London 2013

Authors and Affiliations

  1. 1.School of Automotive EngineeringDalian University of TechnologyDalian, LiaoningPeople’s Republic of China
  2. 2.State Key Laboratory of Structural Analysis for Industrial EquipmentDalian University of TechnologyDalianPeople’s Republic of China

Personalised recommendations