Abstract
As one of the advanced metal processing methods, cold stamping mold is mainly used in sheet metal processing, so it is also called sheet metal stamping. It is a pressure processing method that puts pressure on the sheets or profiles at room temperature by the use of stamping mold to produce plastic deformation or separation and then to obtain parts with certain shape, size, and performance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ning MA, Guozhe S et al. (2011) Study of hot forming for high strength steel: numerical simulation-dynamic explicit algorithm, acta mechanica solida sinica, accepted
Ning MA, Ping HU, Wei GUO, Shuji ZHAI (2010) Methods and equipments for on-line fast detection and control in the hot forming. Application number: 200810051500.2, Publication number: CN 101623721A (in Chinese)
Ping HU, Wei GUO, Ning MA, Shuji ZHAI (2010) High temperature intelligent robot for hot forming. Application number: 200810051498.9, Publication number: CN 101623870A (in Chinese)
Wei GUO, Ping HU, Shuji ZHAI, Ning MA (2010) Energy efficient heating furnace for hot forming. Application number: 200810051499.3, Publication number: CN 101625197A (in Chinese)
Ma N, Hu P, Guo W et al (2010) Coupled constitutive relation and numerical simulation of hot forming. Steel Res Int 81:937–943
Ning MA, Ping HU (2010) Research on formability and application of hot forming technology ISIJ. Adv Manuf Technol 9:26–32
Ma N, Hu P, Guo W et al. (2009) Feasible methods applied to the design and manufacturing process of hot frming. IDDRG2009 conference, Golden, CO USA, 2009, pp 835–843
Weili XU, Jian AI, Aihui LUO, Shurong GUAN (2009) Introduction of sheet metal—hot forming. J Plast Eng 16(4):39–43 In Chinese
ARCELORMITTAL (2008) Usibor 1500 and Hot-Stamping[C]. In: AP&T Press Hardening Seminar, AP&T Press Hardening proceedings, October 2, 2008, Dearborn MI, USA. Dearborn, AP&T, pp. 1–41
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Hu, P., Ma, N., Liu, Lz., Zhu, YG. (2013). The Basics and Equipments of Sheet Metal Forming. In: Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-4099-3_2
Download citation
DOI: https://doi.org/10.1007/978-1-4471-4099-3_2
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-4098-6
Online ISBN: 978-1-4471-4099-3
eBook Packages: EngineeringEngineering (R0)