Advertisement

Analysis of the UHV Tie Line Active Power Peak Value of Weak Interconnected Grids Following Power Shortage Disturbance in China Power System

  • Feng Hong
  • Jinfu Chen
  • Xianzhong Duan
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 138)

Abstract

An ultra high voltage (UHV) AC tie line that connects North China and Central China power grid has been put into operation in 2009. This paper presents a method to calculate the peak value of active power oscillation of the UHV AC tie line following power shortage disturbance. The typical process of the oscillation on the UHV AC line is analyzed. It is shown that the active power oscillation on tie line of week connection grid is similar with the step response of the second-order system. The oscillation peak value is closely related to fault location, system inertia, and system inter-area damping. The method and analysis are tested in China system.

Keywords

UHV AC tie line Oscillation Week connection system Oscillation peak value 

References

  1. 1.
    Guan Z, Wang G (2005) The projects and related key techniques of ultra high voltage transmission in China. China South Power Grid Technol Res 1(6):12–18MathSciNetGoogle Scholar
  2. 2.
    Huang D, Ruan J, Yu S (2008) Overview of the recent developments of ultra high voltage AC transmission in China. IEEE Power Energy Soc Gen Meet 22(8):1–9MATHGoogle Scholar
  3. 3.
    CIGRE (1983) WG 31.04 Report. Electric power transmission at voltages of 1000 kV and above: plans for future AC and DC transmission, data on technical and economic feasibility and on general design, information on testing facilities and the research in progress. Electra 91:83–133Google Scholar
  4. 4.
    CIGRE (1988) WG 38.04 Report. Electric power transmission at voltages of 1000 kV AC or ±600 kV DC and above: network problems and solutions peculiar to UHV AC transmission. Electra 122:41–75Google Scholar
  5. 5.
    CIGRE (1994) WG 38.04 Report: ultra high voltage technology. CIGRE, ParisGoogle Scholar
  6. 6.
    Vittal V, Bhatia N, Fouad AA (1991) Analysis of the inter-area mode phenomenon in power system following large disturbances. IEEE Trans Power Syst 6(4):1515–1521CrossRefGoogle Scholar
  7. 7.
    Kundur P, Wang L (2002) Small signal stability analysis: experience, achievements, and challenges. Int Conf Power Syst Technol Proc 1:6–12CrossRefGoogle Scholar
  8. 8.
    CIGRE (1996) Task force 38.01.07 on power system oscillations. Analysis and control of power system oscillations. CIGRE, Paris Tech. Rep. no 111Google Scholar
  9. 9.
    Barbier C, Ferrari E, Johansson KE (1979) Questionnaire on electromechanical oscillation damping in power systems report on the answers, Electra 07(64):59–82, 84–90Google Scholar
  10. 10.
    Klein M, Rogers GJ, Kundur P (1991) A fundamental study of inter-area oscillations in power systems. IEEE Trans Power Syst 6:914–992CrossRefGoogle Scholar
  11. 11.
    Liu GP, Huang Y et al (2004) Analysis of inter-area oscillations in the south China interconnected power system. Electr Power Syst Res 70:38–45CrossRefGoogle Scholar
  12. 12.
    Bachmann U (1999) Analysis of inter area oscillations in the European electric power system in synchronous parallel operation with the Central-European networks. Proc Power Tech Conf 13(05):49–51Google Scholar
  13. 13.
    Messina AR (1995) Experience with the analysis of small signal stability in longitudinal systems: a case study with the Mexican interconnected system. J Electr Power Energy Syst 17:291–299CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Limited  2012

Authors and Affiliations

  1. 1.State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Electrical Power Security and High Efficiency LabHuazhong University of Science and TechnologyWuhanPeople’s Republic of China

Personalised recommendations