Abstract
Thermosetting resin composites are transformed into three-dimensional networks by curing them in heated moulds, and the temperature as well as the time of cure are important. Good knowledge of the process is the best way to obtain final materials with the shortest possible curing time and the best properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
El Brouzi A, Dursapt M, Vergnaud JM. Simultaneous determination of torque and state of cure of a thermoset composite by experiment and modelling of the process. Plast Rubber Compos Process Applic 1991; 5: 13
Abdul M, Vergnaud JM. Vulcanization progress in rubber sheets during cooling in motionless air after extraction from the mold. Thermochim Acta 1984; 76: 161
Khouider A, Vergnaud JM. Effect of temperature of motionless air on the cure vulcanizates after removal from the mold. J Appl Polym Sci 1986; 32: 5301
Khouider A, Bouzon J, Vergnaud JM. Effect of cure enthalpy on cure progress during the cooling period in motionless air. Thermochim Acta 1986; 102: 83
Khouider A, Turin J, Vergnaud JM. Increase in the state of cure in rubber sheets during the cooling period in water. J Polym Engng 1988; 8: 55
Chater M, Vergnaud JM. Effect of kinetic and thermal parameters on the process of cure of epoxy resin in a cylindrical mould. Eur Polym J 1987; 7: 563
Chater M, Bouzon J, Vergnaud JM. Modelling of the cure of epoxide resin: effect of the diameter of cylindrical moulds. Plast Rubber Process Applic 1987; 7: 199
Chater M, Vergnaud JM. Effect of the temperature of the mold on the cure of epoxy resin. J Polym Engng 1988; 8: 1
Liu H, Armand JY, Bouzon J, Vergnaud JM. Effect of sample size and heating rate on the DSC process for reactions of high enthalpy. Thermochim Acta 1988; 126: 81
Armand JY, Vergnaud JM. Effect of the value of the heating rate in DSC on the kinetic parameters, when there is a high enthalpy of reaction. Thermochim Acta 1988; 131: 15
El Brouzi A, Bouzon J, Vergnaud JM. Modelling of the cure of fibre glass-epoxy resin composite heated by liquid oil at constant temperature. Effect of parameters on the process. Plast Rubber Process Applic 1989; 12: 71
El Brouzi A, Granger R, Bouzon J, Vergnaud JM. Modelling and simulation of the process of reactive injection moulding in the case of a composite with low enthalpy. Plast Rubber Process Applic 1989; 12: 7
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer-Verlag London Limited
About this chapter
Cite this chapter
Vergnaud, JW., Bouzon, J. (1992). Simultaneous Determination of Resistance to Torsion and State of Cure. In: Cure of Thermosetting Resins. Springer, London. https://doi.org/10.1007/978-1-4471-1915-9_17
Download citation
DOI: https://doi.org/10.1007/978-1-4471-1915-9_17
Publisher Name: Springer, London
Print ISBN: 978-1-4471-1917-3
Online ISBN: 978-1-4471-1915-9
eBook Packages: Springer Book Archive