Abstract
For higher accuracy of parallel kinematic robots and machine tools in particular, several error models and compensation algorithms have been developed. The paper presents the approach for testing and control of Stewart platform-based machine tools and robots. The approach is based on serial link measuring system with six DOF in general, which may be used as an autonomous measuring device or in symbiosis with parallel kinematic machines to achieve Cartesian-based control schemes. Developed approach is demonstrated and verified on the example of developed planar parallel simulator with three DOF.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Stewart D 1965 A Platform with Six Degrees of Freedom. Proc. Inst. Mech. Engr. 180(l):371–386
Heisel U, Gringel M 1996 Machine Tool Design Requirements for High-Speed Machining. Annals of the CIRP 45(l):389–392
Warnecke H J, Neugebauer R, Wieland F 1998 Development of Hexapod Based Machine Tool. Annals of the CIRP 47(l):337–340
Patel A J, Ehmann K F 1997 Volumetric Error Analysis of a Stewart Platform -Based Machine Tool. Annals of the CIRP 46(l):287–290
Ropponen T, Arai T 1995 Accuracy Analysis of a Modified Stewart Platform Manipulator. Proceedings of 1995 IEEE Int. Conference on Robotics and Automation, Vol I, pp 521 –525
Geng Z J, Haynes L S 1994 A “3-2-1” Kinematic Configuration of a Stewart Platform and Its Application to Six Degree of Freedom Pose Measurements. Journal of Robotics & CIM 11(1): 23–34
Stoughton R, Arai T 1991 Optimal Sensor Placement for Forward Kinematics Evaluation of a 6-DOF Parallel Link Manipulator. Proc. IEEE/RSJ International Workshop on Intelligent Robots and Systems, IROS’91, pp 785–790
Arai T, Cleary K, Nakamura T, Adachi H, Homma K 1990 Design, Analysis and Construction of a Prototype Parallel Link Manipulator. Proceedings of the IEEE International Workshop on Intelligent Robots and Systems, IROS ’90, pp 205–212
Wang Q Y, Zou H, Zhao M Y et al. 1997 Design and Kinematics of a Parallel Manipulator for Manufacturing. Annals of the CIRP 46(l):297–300
Milutinovic D S, Glavonjic M, Serial link Measuring System - Based Approach for Testing and Control of Stewart Platform — Based Machines. Proceedings of The Fourth ECPD International Conference on Advanced Robotics, Intelligent Automation and Active Systems, pp 288–293
Wampler C H, Hollerbach J M, Arai T 1995 An implicit Loop Method for Kinematic Calibration and Its Applicaton to Closed-Chain Mechanisms. IEEE Transactions on Robotics and Automation ll(5):710–724
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag London Limited
About this paper
Cite this paper
Milutinovic, D.S., Glavonjic, M. (1999). Pose Measurement of Parallel Kinematic Machines with Serial Link Measuring System. In: Boër, C.R., Molinari-Tosatti, L., Smith, K.S. (eds) Parallel Kinematic Machines. Advanced Manufacturing. Springer, London. https://doi.org/10.1007/978-1-4471-0885-6_12
Download citation
DOI: https://doi.org/10.1007/978-1-4471-0885-6_12
Publisher Name: Springer, London
Print ISBN: 978-1-4471-1228-0
Online ISBN: 978-1-4471-0885-6
eBook Packages: Springer Book Archive