Abstract
In Chapter 3, it was shown how a heat transfer model can successfully be used for predicting temperatures in fusion bonding processes. The temperature predictions were used for the determination of processing windows based on the time required to achieve melting of the welding interface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Arias, M., Ziegmann, G., 1996. The Impulse Resistance Welding: A New Technique for Joining Advanced Thermoplastic Composite Parts. In: Proceedings of the 41st International SAMPE Symposium, 1361–1371.
Bastien, L.J., Gillespie Jr, J.W., 1991. A Non-Isothermal Healing Model for Strength and Toughness of Fusion Bonded Joints of Amorphous Thermoplastics. Polymer Engineering and Science 31, 1721–1730.
Bastien, L., Lambing, C., Gillespie, Jr, J.W., 1990. Strength of Semicrystalline Thermoplastic Composite Joints Using Dual Film Technology. In: Proceedings of the 5th Technical Conference of the American Society for Composites (ASC), 59–70.
Butler, C.A., Pitchumani, R., Gillespie, Jr, J.W., 1994. Coupled Effects of Healing and Intimate Contact on the Strength of Fusion-Bonded Thermoplastics. In: Proceedings of the 10th Annual ASM/ESD Advanced Composites Conference, 595–604.
Butler, C.A., McCullough, R.L., Pitchumani, R., Gillespie Jr, J.W., 1998. An Analysis of Mechanisms Governing Fusion Bonding of Thermoplastic Composites. Journal of Thermoplastic Composite Materials 11, 338–363.
Chao, M., Gillespie Jr, J.W., 1994. The Influence of Healing and Bondline Thickness on the Mechanical Performance of Fusion-Bonded Thermoplastic Composites Joints. In: Proceedings of the 39th International SAMPE Symposium, 2023–2037.
Cho, B.-R., Kardos, J.L., 1995. Consolidation and Self-Bonding in Poly(ether ether ketone) (PEEK). Journal of Applied Polymer Science 56, 1435–1454.
Cogswell, F.N., 1992. Thermoplastic Aromatic Polymer Composites, Butterworth-Heinemann Ltd.
Dara, P.H., Loos, A.C., 1987. Processing of Thermoplastic Matrix Composites, Review of Progress in Quantitative Nondestructive Evaluation 6B, 1257–1265.
De Gennes, P.G., 1971. Reptation of a Polymer Chain in the Presence of Fixed Obstacles. Journal of Chemical Physics 55, 572–579.
Don, R.C., Bastien, L.J., Jakobsen, T.B., Gillespie Jr, J.W., 1990. Fusion Bonding of Thermoplastic Composites by Resistance Heating. SAMPE Journal 26(1), 59–66.
Gutowski, T.G., 1985. A Resin Flow/Fibre Deformation Model for Composites. SAMPE Quarterly 16(4), 58–64.
Gutowski, T.G., Morigaki, T., Cai, Z., 1987a. The Consolidation of Laminate Composites. Journal of Composite Materials 21, 172–188.
Gutowski, T.G., Morigaki, T., Cai, Z., 1987b. Consolidation Experiments for Laminate Composites, Journal of Composite Materials 21, 650–669.
Hinkley, J.A., Marchello, J.M., Messier, B.C., 1996. Characterization of Polyimide Composite Ribbon Weld Bonding. In: Proceedings of the 41st International SAMPE Symposium 41, 1335–1345.
Hou, M., Ye, L., Mai, Y.-W., 1999. An Experimental Study of Resistance Welding of Carbon Fibre Fabric Reinforced Polyetherimide (CF Fabric/PEI) Composite Material. Applied Composite Materials 6, 35–49.
Howie, I., Gillespie Jr, J.W., Smiley, J., 1993. Resistance Welding of Graphite-Polyarylsulfone/Polysulfone Dual-Polymer Composites. Journal of Thermoplastic Composite Materials 6, 205–225.
Jud, K., Kausch, H.H., Williams, J.G., 1981. Fracture Mechanics Studies of Crack Healing and Welding of Polymers. Journal of Material Science 16, 204–210.
Kim, Y.H., Wool, R.P., 1983. A Theory of Healing at a Polymer-Polymer Interface. Macromolecules 16, 1115–1120.
Lee, W.I., Springer, G.S., 1987. A Model of the Manufacturing Process of Thermoplastic Matrix Composites. Journal of Composite Materials 21, 1017–1055.
Lekakou, C., Johari, M.A.K.B., Bader, M.G., 1996. Compressibility and Flow Permeability of Two-dimensional Woven Reinforcements in the Processing of Composites. Polymer Composites 17, 666–672.
Loos, A.C., Li, M.-C., 1993. Modeling Thermoplastic Composite Consolidation. In: Miravete., A. (Ed.), Proceedings of the 9th International Conference on Composite Materials (ICCM9) (5), 491–498.
Loos, A.C., Li, M.-C., 1994. Non-Isothermal Autohesion Model for Amorphous Composites. Journal of Thermoplastic Composite Materials 7, 280–310.
Mantell, S.C., Springer, G.S., 1992. Manufacturing Process Model for Thermoplastic Composite Materials, Journal of Composite Materials 26, 2348–2378.
Mantell, S.C., Wang, Q., Springer, G. S., 1992. Processing Thermoplastic Composites in a Press and by Tape Laying — Experimental results, Journal of Composite Materials 26. 2378–2401.
Norpoth, L., Butt, A., Muzzy, J., 1988. Quantitative Analysis of APC-2 Consolidation. In: Proceedings of the 33rd International SAMPE Symposium, 1331–1341.
Phillips, R., Glauser, T., Manson, J.-A.E., 1997. Thermal Stability of PEEK/Carbon Fibre in Air and Its Influence on Consolidation. Polymer Composites 18, 500–508.
Pitchumani, R., Don, R.C., Gillespie, Jr, J.W., 1994. Analysis of On-line Consolidation During the Thermoplastic Tow-placement Process. In: Alam, E.K., Pitchumani, R. (Eds), Heat and Mass Transfer in Composites Processing, ASME Press.
Pitchumani, R., Ranganathan, S., Don, R.C., Gillespie Jr, J.W., 1996. Analysis of Transport Phenomena Governing Interfacial Bonding and Void Dynamics during Thermoplastic Tow Placement. International Journal of Heat and Mass Transfer 39, 1883–1897.
Prager, S, 1981. The Healing Process at Polymer-Polymer Interfaces. The Journal of Chemical Physics 75, 5194–5198.
Smiley, A.J., Halbritter, A., Cogswell, F.N., Meakin, P.J., 1991a. Dual Bonding of Thermoplastic Composite Structures. Polymer Engineering and Science 31, 526–532.
Smiley, A.J., Chao, M., Gillespie Jr, J. W., 1991b. Influence and Control of Bondline Thickness of Fusion Bonded Joints of Thermoplastic Composites. Composite Manufacturing 2, 223–232.
Sonmez, F.O., Hahn, H.T., 1997. Analysis of the On-line Consolidation Process of Thermoplastic Composite Tape Placement. Journal of Thermoplastic Composite Materials 10, 543–572.
Springer, G.S., Lee, W.I., 1988. Processing Model of Thermoplastic Matrix Composites. In: Proceedings of the 33rd International SAMPE Symposium, 661–669.
Tierney, J.J., Heider, D., Gillespie Jr, J.W., 1997. Welding of Thermoplastic Composites using the Automated Tow-Placement Process: Modelling and Control. In: Proceedings of the Annual Technical Conference ANTEC ′97, 1165–1170.
Wood, J.R., Bader, M.G., 1993a. Void Control for Polymer-matrix Composites (1): Theoretical and Experimental Methods for Determining the Growth and Collapse of Gas Bubbles. Composite Manufacturing 5, 139–147.
Wood, H.R., Bader, M.G., 1993b. Void Control for Polymer-matrix Composites (2): Experimental Evaluation of a Diffusion Model for the Growth and Collapse of Gas Bubbles. Composite Manufacturing 5, 149–158.
Wool, R.P., O'Connor, K.M., 1981. A Theory of Crack Healing in Polymers. Journal of Applied Physics 52, 5953–5963.
Wool, R.P, O'Connor, K.M, 1982. Time Dependence of Crack Healing. Journal of Polymer Science: Polymer Letters Edition 20, 7–16.
Wool, R.P., Yuan, B.-L., McGAREL, O.J., 1989), Welding of Polymer Interfaces. Polymer Engineering and Science 29, 1340–1367.
Xiao, X.R., 1993. A Model for the Deconsolidation Phenomenon in Induction Heating of Thermoplastic Resin Composites. In: Miravete, A. (Ed.), Proceedings of the 9th International Conference on Composite Materials (ICCM9) (2), 243–250.
Xiao, X.R., Hoa, S.V., Street, K.N., 1990. Repair of Thermoplastic Composite Structures by Fusion Bonding. In: Proceedings of the 35th International SAMPE Symposium, 37–45.
Xiao, X.R., Hoa, S.V., Street, K.N., 1992. Processing and Modelling of Resistance Welding of APC-2 Composite. Journal of Composite Materials 26, 1031–1049.
Zach, T., Lew, J., North, T.H., Woodhams, R.T., 1989. Joining of High Strength Oriented Polypropylene using Electromagnetic Induction Bonding and Ultrasonic Welding. Materials Science and Technology 5, 281–287.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer-Verlag London
About this chapter
Cite this chapter
Ageorges, C., Ye, L. (2002). Consolidation Mechanisms. In: Fusion Bonding of Polymer Composites. Engineering Materials and Processes. Springer, London. https://doi.org/10.1007/978-1-4471-0171-0_4
Download citation
DOI: https://doi.org/10.1007/978-1-4471-0171-0_4
Publisher Name: Springer, London
Print ISBN: 978-1-4471-1087-3
Online ISBN: 978-1-4471-0171-0
eBook Packages: Springer Book Archive