Abstract
Nanoindentation finds a wide application. The test results provide information on the elastic modulus, hardness, strain-hardening, cracking, phase transformations, creep, fracture toughness, and energy absorption. Since the scale of deformation is very small, the technique is applicable to thin surface films and surface modified layers. In many cases, the microstructural features of a thin film or coating differs markedly from that of the bulk material due to the presence of residual stresses, preferred orientations of crystallographic planes, and the morphology of the microstructure. The proceedings of annual symposiums are a rich source of information about the applications of nanoindentation. In this chapter, some rather straightforward examples of analysis of nanoindentation test data are presented using the methods described in the previous chapters.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Fused silica is amorphous SiO2 manufactured by chemical combination of silicon and oxygen. Fused quartz is a similar material made from melting natural silica crystals or sand and is considered by some to be less pure than fused silica.
References
D.M. Marsh, “Plastic flow in glass,” Proc. R. Soc. A279, 1964, pp. 420–435.
A. Bendavid, P.J. Martin, and H. Takikawa, “Deposition and modification of titanium dioxide thin films by filtered arc deposition,” Thin Solid Films, 360, 2000, pp. 241–249.
S. Veprek “The search for novel, superhard materials,” J. Vac. Sci. Technol. A17 5, 1999, pp. 2401–2420.
NIST Structural Ceramics Database SRD Database No. 30, National Institute of Standards and Technology, Gaithersburg MD, USA.
R.J. Henley, H.K. Mao, P.M. Bell, and B.O. Mysen, “Raman-Spectroscopy of SiO2 glass at high pressure,” Phys. Rev. Lett. 57 6, 1986, pp. 747–750.
F.L. Galeener, “Raman and ESR studies of the thermal history of amorphous SiO2,” J. Non-Cryst. Solids, 71, 1985, pp. 373–386.
N.M. Everitt, M.I. Davies and J.F. Smith, “High temperature nanoindentation – the importance of isothermal contact” Phil. Mag. 2010 (iFirst)
A.C. Fischer-Cripps, P. Karvankova and S. Veprek, “On the measurement of hardness of super-hard coatings,” Surf. Coat. Technol. 200, 2006, pp. 5645–5654.
A. Matthews and A. Leyland “On the significance of the H/E ratio in wear control: a nanocomposite approach to optimised tribological behaviour”, Wear 246, 2000 pp. 1–11.
P.C. Jindal et al “Performance of PVD TiN, TiCN, and TiAlN cemented carbide tools in turning”, Int. J. Refract. Metals 17, 1999 pp. 163–170.
G.S. Fox-Rabinovich et al, “Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials” Surf. Coat. Technol. 204, 2009 pp. 489–496.
E. Weppelmann, M. Whittling, M.V. Swain, and D. Munz, “Indentation cracking of brittle thin films on brittle substrates,” in Fracture Mechanics of Ceramics, Vol. 12, R.C. Bradt et al. eds., Plenum Press, N.Y., 1996.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Fischer-Cripps, A.C. (2011). Applications of Nanoindentation. In: Nanoindentation. Mechanical Engineering Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9872-9_12
Download citation
DOI: https://doi.org/10.1007/978-1-4419-9872-9_12
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-9871-2
Online ISBN: 978-1-4419-9872-9
eBook Packages: EngineeringEngineering (R0)