Abstract
Harvester is the main working machine for the mechanization yield of sugarcane, and the working performance of its cutter to a large extent affects the cutting quality of the sugarcane. In this chapter, the quadratic regression orthogonal rotatable design was adopted and an indoor simulation experiment was carried out on the affecting factors, including rotation speed of the cutter, harvester forward speed, knife number, cutter obliquity, cutting angle, and the knife-edge angle. The study on the affecting factors was done by means of a statistical analysis and a mathematical model establishment according to the standard of working capability. The relevant mathematical model was established and the single-factor effect of working parameters on the cutting performance of sugarcane cutter was studied. This chapter provides a direction for the further study on the control of the working parameters.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Q.T. Liu, Y.G. Ou, S.L. Qing.: Cutting Force Calculation of Sugarcane Stalk. Transactions of the Chinese Society of Agricultural Machinery, Vol.37,No.9,pp.89–92(2006)
Ship Peng Lo.:An analysis of cutting under different rake angles using the finite element method. Journal of Materials Processing Technology,105, pp.143–151,(2000)
Qingting Liu.:The cutting mechanism of sugarcane.South China Agriculture University, Guangzhou, P.R. China (2004)
Roberto da cunha mello, Harry harris.:Cane Damage and Mass Losses for Conventional and Serrated Basecutter Blades. In:Proceedings of Australia Society Sugarcane Technology Meeting,22, pp.84–91(2000)
R.G. Wang, J. Yang.:Experimental Optimization Study on Working Parameters of Sugarcane Harvester Cutter. Journal of Agricultural Mechanization Research,4,pp.144–147(2004)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media, LLC
About this paper
Cite this paper
Wang, R. (2012). Single-Factor Influence of Working Parameters on the Cutting Property of Cutter Mechanisms. In: Chen, R. (eds) 2011 International Conference in Electrics, Communication and Automatic Control Proceedings. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-8849-2_3
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8849-2_3
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-8848-5
Online ISBN: 978-1-4419-8849-2
eBook Packages: EngineeringEngineering (R0)