Abstract
The behaviour of Portland cement with and without 30% fly ash addition in aggressive solution was studied. This paper considers the ammonium-sulphate corrosion of the hardened cement paste as the main constituent of the portland cement concrete. The cement paste test samples were prepared, cured in water for 21 day and then exposed to the influence of aggressive environment (10% (NH4)2SO4 solution). The measurements of several properties were carried out and the results were analyzed.
The image of the surface composition and morphology of the cement paste test samples was made by scanning electron microscopy (SEM). Concentration gradient of sulphate ions in cement paste depth was obtained by energy-dispersive analysis (EDS) and this method was found very useful for studying the portland cement concrete corrosion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
I. Biczok, Concrete corrosion, concrete protection, Eight Edition, Budapest (1972).
V.M. Moskvin, Korozija betona i zelezobetona, Moskva (1980).
S. Miletić, and M. Ilić, Sulphate corrosion of Portland cement with various mineral compositions, Proceedings of the 13 th International Corrosion Congress, Melbourne, Australia, II:188 (1996).
S. Miletić, M. Ilić, J. Ranogajec, R. Marinković-Neducin, and M. Djurić, Ammonium-sulphate corrosion in Portland cement and Portland ash cement concrete, Proceedings of the EUROCORR ‘97, The European Corrosion Congress, Trondheim, Norway, I:573 (1997).
S. Miletić, M. Ilić, J. Ranogajec, R. Marinković-Neducin, and M. Djurić, Portland ash cement degradation in ammonium-sulphate solution, Cement and Concrete Research 26:5, 713 (1998).
S. Miletić, and M. Ilić, Effect of ammonium-sulphate corrosion on the strength of concrete, Proceedings of the 10 th ICCC, Göteborg, Sweden, 4:4iv023 (1997).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media New York
About this chapter
Cite this chapter
Miletić, S., Ilić, M., Jovanić, P. (1999). Eds Analysis of Sintered Material Degradation In An Aggressive Environment. In: Stojanović, B.D., Skorokhod, V.V., Nikolić, M.V. (eds) Advanced Science and Technology of Sintering. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-8666-5_44
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8666-5_44
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-4661-6
Online ISBN: 978-1-4419-8666-5
eBook Packages: Springer Book Archive