Abstract
At the end of this volume, several years in the making, it is worth reflecting upon the objectives the editorial team had in mind when we started this project. We were motivated by the disturbing observation that although academia seemed to view the problems of planning production and inventories as a largely solved problem, with basic formulations established and agreed upon, there was broad consensus among our industrial colleagues that the available models and solution techniques were a long way from representing the full richness and complexity of the task as they encountered it in their daily operations. Our objective with these volumes was to address this situation by bringing together a leading group of researchers and practitioners to delineate the broader boundaries of the problem and present the state of the art in various related areas. A representative sample of leading-edge industrial contributions illustrates the state of the art in industrial practice, while a selection of research contributions with a more academic bent explores specific aspects of new areas.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ankenman BE, Bekki JM, Fowler J, Mackulak GT, Nelson BL, Yang F (2010) Simulation in production planning: An overview with emphasis in recent developments in cycle time estimation. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 565–592
Artiba A, Dhaevers V, Duvivier D, Elmaghraby SE (2011) A multi-model approach for production planning and scheduling in an industrial environment. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 489–530
Aydinliyim T, Variraktarakis GL (2010) Sequencing strategies and coordination issues in outsourcing and subcontracting operations. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 269–320
Birge JR, Louveaux F (1997) Introduction to stochastic programming. Springer, New York
Carlson R, Rafinejad D (2010) The transition to sustainable product development and manufacturing. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 45–82
Chandrashekar TS, Narahari Y (2011) Procurement network formation: a cooperative game approach. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 185–206
Cheng F, Ettl M, Lin GY, Tonner M, Yao DD (2011) Designing flexible supply chain contracts with options. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 207–230
Dessouky MM, Leachman RC (1997) Dynamic models of production with multiple operations and general processing times. J Oper Res Soc 48(6):647–654
Dionne L, Kempf KG (2010) Data in production and supply chain planning. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 167–184
Elmaghraby SE (2010) Production capacity: Its bases, functions and measurement. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 119–166
Ettl M, Sourirajan K, Huang P, Ervolina TR, Lin GY (2011) Supply and demand synchronization in assemble-to-order supply chains. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 81–104
Fischbein S, Yellig E (2011) Why is it so hard to build and validate discrete event simulation models of manufacturing facilities? In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 271–288
Floudas CA, Lin X (2005) Mixed integer linear programming in process scheduling: modeling, algorithms and applications. Ann Oper Res 139:131–162
Garg D, Narahari Y, Foster E, Kulkarni D, Tew JD (2011) A mechanism design approach for decentralized supply chain formation. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 153–184
Graves SC (2010) Uncertainty and production planning. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 83–102
Grinold RC (1983) Model building techniques for the correction of end effects in multistage convex programs. Oper Res 31(3):407–431
Heching A, King AJ (2010) Financial uncertainty in supply chain models. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 185–204
Karaesmen I, Scheller-Wolf A, Deniz B (2010) Managing perishable and aging inventories: review and future research directions. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 393–436
Katircioglu K, Gallego G (2011) A practical multi-echelon inventory model with semiconductor manufacturing application. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 133–152
Lefeber E, Armbruster D (2010) Aggregate modeling of manufacturing systems. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 509–536
Levi R, Roundy RO, Shmoys DB, Truong VA (2008) Approximation algorithms for capacitated stochastic inventory control models. Oper Res 56(5):1184–1199
Maddah B, Bish EK, Munroe B (2010) Pricing, variety and inventory decisions for product lines of substitutable items. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 367–392
Mahon B (2003) The man who changed everything: The Life of James Clark Maxwell. Wiley, Chichester
McKay KN (2010) Field-based research on production control. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 205–232
Missbauer H, Uzsoy R (2010) Optimization models for production planning. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 437–508
Missbauer H, Hauber W, Stadtler H (2011) Developing a computerized scheduling system for the steelmaking–continuous casting process. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 461–488
Orcun S, Uzsoy R (2011) The effects of production planning on the dynamic behavior of a simple supply chain: an experimental study. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning in the extended enterprise: a state of the art handbook. Springer, Berlin, pp 43–80
Ormeci Matoglu M, Vande Vate J (2011) Build-to-order meets global sourcing: planning challenge for the auto industry. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 2. Springer, New York, pp 231–248
Ouyang Y, Daganzo C (2010) Robust stability analysis of decentralized supply chains. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 537–664
Ovacik IM (2010) Advanced planning and scheduling systems: the quest to leverage erp for better planning. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 33–44
Ozer O (2010) Inventory management: information, coordination and rationality. In: Kempf KG, Keskinocak P, Uzsoy R (eds) Planning production and inventories in the extended enterprise: a state of the art handbook, vol 1. Springer, New York, pp 321–366
Powell WB (2007) Approximate dynamic programming: solving the curses of dimensionality. Wiley, New York
Puterman ML (2005) Markov decision processes: discrete stochastic dynamic programming. Wiley, New York
Simon HA, Holt CC (1954) The control of inventories and production rates – a survey. Oper Res 2(3):289–301
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer New York
About this chapter
Cite this chapter
Kempf, K., Keskinocak, P., Uzsoy, R. (2011). The Summing-Up. In: Kempf, K., Keskinocak, P., Uzsoy, R. (eds) Planning Production and Inventories in the Extended Enterprise. International Series in Operations Research & Management Science, vol 152. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-8191-2_21
Download citation
DOI: https://doi.org/10.1007/978-1-4419-8191-2_21
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-8190-5
Online ISBN: 978-1-4419-8191-2
eBook Packages: Business and EconomicsBusiness and Management (R0)