In this chapter we consider issues related to the design of optical receivers. As signals travel in a fiber, they are attenuated and distorted, and it is the function of the receiver circuit at the other side of the fiber to generate a clean electrical signal from this weak, distorted optical signal.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
L. L. Wang, “Ultra-wide dynamic range receiver for noise loaded WDM transmission systems,” Optics Express, Vol. 16, pp. 20382–20387, 2008
R. Vetury et al., “High sensitivity and wide-dynamic-range optical receiver for 40 Gbit/s optical communication networks,” Electronics Letters, Vol. 39, pp. 91–92, 2003
H. Matsuda et al., “High-sensitivity and wide-dynamic-range 10Gbit/s APD/preamplifier optical receiver module,” Electronics Letters, Vol. 38, pp. 650–651, 2002
M. S. Park, C. H. Lee, and C. S. Shim, “Optical receiver design with high sensitivity and high dynamic range using feedback and lossy noise-matching network,” Optical and Quantum Electronics, Vol. 27, pp. 527–534, 1995
J. M. Khoury, “On the design of constant settling time AGC circuits,” IEEE Transactions on Circuits and Systems-II, Analog and Digital Signal Processing, Vol. 45, pp. 283–294, 1998
T. Kurosaki et al., “Low-cost 10-Gb/s optical receiver module using a novel plastic package and a passive alignment technique,” IEEE Journal of Lightwave Technology, Vol. 23, pp. 4257–4264, 2005
HFAN-3.2.0, “Improving noise rejection of a PIN-TIA ROSA,” Application note from Maxim Integrated Products, 2008. Available from www.maxim-ic.com.
J. M. Baek et al., “High sensitive 10-Gb/s APD optical receivers in low-cost TO-can-type packages,” IEEE Photonics Technology Letters, Vol. 17, pp. 181–183, 2005
M. Stephen, L. Luo, J. Wilson, and P. Franzon, “Buried bump and AC coupled interconnection technology,” IEEE Transactions on Advanced Packaging, Vol. 27, pp. 121–125, 2004
HFAN-1.1, “Choosing AC-Coupling capacitors,” Application Note from Maxim Integrated Products, 2008. Available from www.maxim-ic.com
T. Kok-Siang et al., “Design of high-speed clock and data recovery circuits,” Analog Integrated Circuits and Signal Processing, Vol. 52, pp. 15–23, 2007
F. Centurelli and G. Scotti, “A high-speed low-voltage phase detector for clock recovery from NRZ data,” IEEE Transactions on Circuits and Systems I, Regular Papers, Vol. 54, pp. 1626–1635, 2007
G. T. Kanellos et al., “Clock and data recovery circuit for 10-Gb/s asynchronous optical packets,” IEEE Photonics Technology Letters, Vol. 15, pp. 1666–1668, 2003
M. Ahmed and M. Yamada, “Effect of intensity noise of semiconductor lasers on the digital modulation characteristics and the bit error rate of optical communication systems,” Journal of Applied Physics, Vol. 104, Article Number 013104, 2008
K.C. Jong, H.W. Tsao, and S.L. Lee, “Q-factor monitoring of optical signal-to-noise ratio degradation in optical DPSK transmission,” Electronics Letters, Vol. 44, pp. 761–762, 2008
J. D. Downie, “Relationship of Q penalty to eye-closure penalty for NRZ and RZ signals with signal-dependent noise,” Journal of Lightwave Technology, Vol. 23, pp. 2031–2038, 2005
E. W. Laedke et al., “Improvement of optical fiber systems performance by optimization of receiver filter bandwidth and use of numerical methods to evaluate Q-factor,” Electronics Letters, Vol. 35, pp. 2131–2133, 1999
D. R. Smith and I. Garrett, “Simplified approach to digital optical receiver design,” Optical and Quantum Electronics, Vol. 10, pp. 211–221, 1978
HFAN-3.0.0, “Accurately estimating optical receiver sensitivity” Application Note from Maxim Integrated Products, available from www.maxim-ic.com
HFAN-9.0.2, “Optical signal-to-noise ratio and the Q-factor in fiber-optic communication systems,” Application note from Maxim Integrated Products, available from www.maxim-ic.com
N. S. Bergano, F. W. Kerfoot, and C. R. Davidsion, “Margin measurements in optical amplifier system,” IEEE Photonics Technology Letters, Vol. 5, pp. 304–306, 1993
M. R. Spiegel, Mathematical Handbook , Schaum’s Outline Series, McGraw-Hill, New York, 1992
Y. D. Choi, D. K. Jeong, and W. C. Kim, “Jitter transfer analysis of tracked oversampling techniques for multigigabit clock and data recovery,” IEEE Transactions on Circuits and Systems II-Analog and Digital Signal Processing, Vol. 50, pp. 775–783, 2003
M. J. E. Lee et al., “Jitter transfer characteristics of delay-locked loops – theories and design techniques,” IEEE Journal of Solid State Electronics, Vol. 38, pp. 614–621, 2003
G.783, Transmission Systems and Media, Digital Systems and Networks, ITU-T, 2006
C. F. Liang, S. C. Hwu, and S. L. Liu, “A Jitter-tolerance-enhanced CDR using a GDCO-based phase detector,” IEEE Journal of Solid State Circuits, Vol. 43, pp. 1217–1226, 2008
M. Hayashi et al., “Analysis on jitter tolerance of optical 3R regenerator,” IEEE Photonics Technology Letters, Vol. 15, pp. 1609–1611, 2003
S. Y. Sun, “An analog PLL-based clock and data recovery circuit with high input jitter tolerance,” IEEE Journal of Solid-State Circuits, Vol. 24, pp. 325–330, 1989
K. Hara, et al., “1.25/10.3 Gbit/s dual-rate burst-mode receiver,” Electronics Letters, Vol. 44, pp. 869–870, 2008
E. Hugues-Salas et al., “Fast edge-detection burst-mode 2.5 Gbit/s receiver for gigabit passive optical networks,” Journal of Optical Networking, Vol. 6, pp. 482–489, 2007
X. Z. Qiu et al., “Development of GPON upstream physical-media-dependent prototypes,” Journal of Lightwave Technology, Vol. 22, No. 11, pp. 2498–2508, Nov. 2004
J. M. Baek et al, “Low-cost and high-performance APD burst-mode receiver employing commercial TIA for 1.25-Gb/s EPON,” IEEE Photonics Technology Letters, Vol. 17, No. 10, pp. 2170–2172, Oct. 2005
Q. Le et al., “A burst-mode receiver for 1.25-Gb/s Ethernet PON with AGC and internally created reset signal,” IEEE Journal of Solid State Circuits, Vol. 39, No. 12, pp. 2379–2388, Dec 2004
H. Wang and R. Lin, “The parameter optimization of EPON physical layer and the performance analysis for burst mode receiver,” Proceedings of SPIE, Vol. 4908, pp. 105–114, 2002
A. J. Phillips, “Power penalty for burst mode reception in the presence of interchannel crosstalk,” IET optoelectronics, Vol. 1, pp. 127–134, 2007
P. Ossieur et al., “Sensitivity penalty calculation for burst-mode receivers using avalanche photodiodes,” Journal of Lightwave Technology, Vol. 21, No. 11, pp. 2565–2575, Nov. 2003
Peter Ossieur et al., “Influence of random DC offsets on burst-mode receiver sensitivity,” Journal of Lightwave Technology, Vol. 24, No. 3, pp. 1543–1550 March 2006
S. Nishihara et al., “10.3 Gbit/s burst-mode PIN-TIA module with high sensitivity, wide dynamic range and quick response,” Electronics Letters, Vol. 44, pp. 222–223, 2008
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Azadeh, M. (2009). Optical Receiver Design. In: Fiber Optics Engineering. Optical Networks. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-0304-4_9
Download citation
DOI: https://doi.org/10.1007/978-1-4419-0304-4_9
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-0303-7
Online ISBN: 978-1-4419-0304-4
eBook Packages: EngineeringEngineering (R0)