Under the combination of elevated temperature and mechanical loads, struc tural members tend to creep. Basic laws of creep are presented and the effect of temperature changes in the constitutive law of creep is discussed. The rheolog ical models of two important engineering concepts of stress, namely, the load-and the deformation-controlled stresses, are presented. The chapter concludes with the description of numerical techniques of solutions to creep problems. The nature of pure thermal stresses as the deformation-controlled stresses, is presented in the example problems. It is shown that pure thermal stresses relax as the time advances
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Bibliography
Norton, F.H., The Creep of Steel at High Temperatures, McGraw-Hill, New York, 1929
Nádai, A. and Davis, E.A., The Creep of Metals II, Trans. ASME, J. Appl. Mech, Vol. 3, pp. A–7, March 1936
Bailey, R.W., Design Aspects of Creep, J. Appl. Mech., Vol. 3, pp. A-1, March 1936
Soderberg, C.R., The Interpolation of Creep Tests for Machine Design, Trans. ASME, Vol. 58, pp. 733–743, 1936
Wahl, A.M., Creep Tests of Rotating Disks at Elevated Temperature and Comparison with Theory, J. Appl. Mech., pp. 225–235, Sept. 1954
Wahl, A.M., Analysis of Creep in Rotating Disks Based on the Tresca Criterion and Associated Flow Rule, J. Appl. Mech., pp. 231–238, June 1956
Wahl, A.M., Stress Distribution in Rotating Disks Subjected to Creep at Elevated Temperatures, J. Appl. Mech., pp. 299–305, 1957
Weir, C.D., The Creep of Thick Tubes Under Internal Pressure, J. Appl. Mech., pp. 464–466, Sept. 1957
Finnie, I. and Heller, W.R., Creep of Engineering Materials, McGraw-Hill, New York, 1959
Mendelson, A., A General Approach to the Practical Solution of Creep Problems, Trans. ASME, Vol. 81, pp. 585–598, 1959
Rimrott, F.P.J., Creep of Thick-Walled Tubes Under Internal Pressure Considering Large Strain, Trans. ASME, Vol. 81, pp. 271–275, 1959
Taira, S., Creep of Thick-Walled Cylinders Under Internal Pressure at Elevated Temperature, The 8th Japan Congress on Testing Materials, Kyoto, Japan, pp. 53–60, 1965
Bhatnagar, N.S. and Gupta, S.K., Analysis of Thick-Walled Orthotropic Cylinder in the Theory of Creep, J. Phys. Soc. Jpn., Vol. 27, No. 6, Dec. 1969
Hult, J.A.H., Creep in Engineering Structures, Blaisdell, New York, 1966
Odqvist, F.K.G., Mathematical Theory of Creep and Creep Rupture, Oxford University Press, Oxford, 1966
Rabotnov, Y.N., Creep Problems in Structural Members, Wiley Inter-science Div., Wiley, New York, 1969
Smith, A.J. and Nicolson, A.M., Advances in Creep Design, Halsted Press Div., Wiley, New York, 1971
Penny, R.K. and Marriot, D.L., Design for Creep, McGraw-Hill, New York, 1971
Kachanov, L.M., The Theory of Creep, National Lending Library, New York, 1967
Fridman, Y.B., Strength and Deformation in Nonuniform Temperature Field, Consultants Bureau, New York, 1964
Dorn, J.E., Some Fundamental Experiments on High Temperature Creep, Mech. Phys. Solids, Vol. 3, pp. 85–116, 1954
Skrzypek, J., Plasticity and Creep, Edited by Hetnarski, R.B., Begell House, New York, and CRC Press, Boca Raton, 1993
Garofalo, F., Fundamentals of Creep and Creep Rupture in Metals, MacMillan Series in Material Science, MacMillan, New York, 1965
Weertman, J., Theory of Steady State Creep Based on Dislocation Climb, J. Appl. Phys., Vol. 26, p. 1213, 1955
Weertman, J., Creep of Aluminium Single Crystals, J. Appl. Phys., Vol. 27, p. 832, 1956
Weertman, J., Creep of Indium, Lead and Some of Their Alloys with Various Metals, Trans. AIME, Vol. 218, p. 207, 1960
Sherby, O.D., Creep of Polycrystalline Alpha and Beta Thallium, Trans. AIME, Vol. 212, p. 708, 1958
Lawly, A., Coll, J.A., and Cahn, R.W., Influence of Crystallographic Order on Creep of Iron-Aluminium, Trans. AIME, Vol. 218, p. 166, 1960
Tagart, W.J., Activation Energies for High Temperature Creep of Poly-crystalline Magnesium, Acta Met., Vol. 9, p. 614, 1961
McLean, D. and Hale, K.F., Structural Processes in Creep, London: Iron and Steel Inst., pp. 19, 1961
Howard, E.M., Barmore, W.C., Mote, J.D., and Dorn, J.E., On the Thermally-Activated Mechanism of Prismatic Slip in the Silver-Aluminium Hexagonal-Intermediate Phase, Trans. AIME, Vol. 227, p. 1061, 1963
Jones, R.B. and Harris, J.E., Proceedings of Joint International Confer ence on Creep, New York, The Institution of Mech. Eng., pp. 1–11, 1963
Price, A.T., Holl, H.A., and Grennough, A.P., The Surface Energy and Self Diffusion Coefficient of Solid Iron Above 1350°C, Acta Met., Vol. 12, p. 49, 1964
Sellars, C.M. and Quarrell, A.G., The High Temperature Creep of Gold-Nickel Alloys, Inst. Met., Vol. 90, p. 329, 1961–1962
Kauzman, W., Flow of Solid Metals from the Standpoint of the Chamical Rate Theory, Trans. AIME, Vol. 143, p. 57, 1941
Cottrell, A.H. and Aytekin, V., The Flow of Zinc Under Constant Stress, J. Inst. Met., Vol. 77, p. 389, 1950
Feltham, P., The Plastic Flow of Iron and Plane Carbon Steels Above A3-Point, Proc. Phys. Soc., Vol. 66B, p. 865, 1953
Feltham, P., On the Mechanism of High Temperature Creep in Metals with Special Reference to Polycrystalline Lead, Proc. Phys. Soc., Vol. 69B, p. 1173, 1956
Feltham, P. and Mikean, J.D., Creep in Face-Centered Cubic Metals with Special Reference to Copper, Acta. Met., Vol. 7, p. 614, 1959
Feltham, P., Stress Relaxation in Copper and Alpha-Brasses at Low Tem peratures, J. Inst. Met., Vol. 89, p. 210, 1960–1961
Nádai, A. and McVetty, P.G., Hyperbolic Sine Chart for Estimating Work ing Stresses of Alloys at Elevated Temperatures, Proc. ASTM, Vol. 43, p. 735, 1943
Sherby, O.D. and Dorn, J.E., Some Observations on Correlations Between the Creep Behavior and the Resulting Structures in Alpha Solid Solutions, Trans. AIME, Vol. 197, p. 324, 1953
Weertman, J. and Breen, J.E., Creep of Tin Single Crystals, J. Appl. Phys., Vol. 27, p. 1189, 1956
Garofalo, F., Richmond, O., and Domis, W.F., Joint Int. Conf. on Creep, London: The Institution of Mech. Eng., pp. 1–31, 1963
Sherby, O.D., Frenkel, R., Nadeau, J., and Dorn, J.E., Effect of Stress on the Creep Rates of Polycrystalline Aluminium Alloy Under Constant Structure, Trans. AIME, Vol. 200, p. 275, 1954
Feltham, P., On the Activation Energy of High Temperature Creep in Metals, Phil. Mag., Vol. 2, p. 585, 1957
Graham, A. and Walles, K.F.A., Relation Between Long and Short Time Properties of a Commercial Alloy, J. Iron Steel Inst., Vol. 179, 1955
McVetty, P.G., Creep of Metals at Elevated Temperatures — The Hyper bolic Sine Relation Between Stress and Creep Rate, Trans. ASME, Vol. 65, 1943
Marin, J. and Pao, Y.H., An Analytical Theory of the Creep Deformation of Materials, J. Appl. Mech., Vol. 20, 1953
Saint-Venant, B., Mémoire sur l'établissement des équations différentialles des mouvements intérieurs opérés dans les corps solides ductiles au delà des limites où l'élasticité pourrait les ramener à leur premier état, Compt. Rend., Vol. 70, pp. 473–480, 1870
Lévy, M., Mémoire sur les équations générales des mouvements intérieurs des corps solides ductile au dela limites où l'élasticité pourrait les ramener à leur premier état, Compt. Rend., Vol. 70, pp. 1323–1325, 1870
von Mises, R., Mechanik der festen Körper in Plastisch deformablem Zu-stand, Göttinger Nachr. Math. Phys., Kl., pp. 582–592, 1913
Rozenblyum, V.I., Axisymmetric Creep of Cylindrical Bodies with Tem perature Variation Along the Axis, PMTF, No. 6, 1961
Danyushevskii, A. and Listrinskii, G., Creep in a Nonuniformly Heated Thick-Walled Tube Subjected to Internal Pressure, Mech. Solids, Vol. 1, No. 2, pp. 72–73, 1966
Eslami, M.R., Creep Linearization of Non-Axisymmetrically Heated Cylinders, AIAA J., Vol. 18, No.7, pp. 862–864, July 1980
Sabbaghian, M. and Eslami, M.R., Creep Relaxation of Axisymmet-ric Thermal Stresses in Thick-Walled Cylindrical Vessels, ASME Paper No.74-PVP-9, 1974
Sabbaghian, M. and Eslami, M.R., Creep Relaxation of Nonaxisymmetric Thermal Stresses in Thick-Walled Cylinders, AIAA J., Vol. 12, pp. 1652– 1658, Dec. 1974
Eslami, M.R., Creep Relaxation of a Beam of General Cross Section Sub jected to Mechanical and Thermal Loads, Trans. ASME, J. Mech. Design, Vol. 100, pp. 626–629, 1978
Eslami, M.R. and Tafreshi, A., Thermoelastic-Plastic Analysis of Beams, Proc. Int. Conf. Constitutive Law in Eng. Mat., Chongqing, China, Aug. 10–13, 1989
Eslami, M.R., Yazdan, M.R., and Salimi, E., Elastic-Plastic-Creep Anal ysis of Thick Cylinders and Spheres of Strain Hardening Materials, Proc. Int. Cong. Appl. Mech., Beijing, China, Aug. 21–25, 1989
Eslami, M.R. and Loghman, A., Thermoelastic-Plastic-Creep Analysis of Thick Cylindrical Pressure Vessels of Strain Hardening Materials, Proc. ASME-PVP Conf., Hawaii, July 23–27, 1989
Eslami, M.R. and Shariyat, M., A Technique to Distinguish the Primary and Secondary Stresses, Trans. ASME, J. Press. Vess. Tech., Vol. 117, pp. 1–7, 1995
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media, B.V
About this chapter
Cite this chapter
(2009). Creep Analysis. In: Thermal Stresses – Advanced Theory and Applications. Solid Mechanics and its Applications, vol 158. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-9247-3_10
Download citation
DOI: https://doi.org/10.1007/978-1-4020-9247-3_10
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-9246-6
Online ISBN: 978-1-4020-9247-3
eBook Packages: EngineeringEngineering (R0)