Abstract
This chapter presents laboratory and in-situ experimental techniques used to describe the mechanical behaviour of pavement material at different saturation stages. The use of repeated triaxial load testing to obtain stiffness characteristics as well as the ability of the material to withstand accumulation of permanent deformation during cyclic loading is considered. For unsaturated soils, in addition to mechanical variables, it is shown that a moisture/suction control should be added. Several techniques are described to assist in this. A brief presentation of model parameters and tests needed for model calibration are introduced. Evaluation of pavement structural capacity based on deflection measurements with non-destructive testing equipment are presented. Finally, some examples of laboratory and in-situ measurement are shown.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
references
AASHTO, 2000, “Determining the resilient modulus of soils and aggregate materials”, standard: T 307-99 in Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 20th ed’n., Am. Assoc. State Highway & Transportation Eng’rs., Washington, DC.
Brown, S.F., 1996, “Soil mechanics in pavement engineering”, Geotechnique 46(3), pp. 382–426.
Brüll, A., 1983, “Effets mécaniques de l’eau interstitielle – Détermination des modules complexes de déformation longitudinale et de cisaillement des sols en fonction de la succion”, Centre de Recherches Routières, Bruxelles, Belgique, 180pp.
CEN, 2002, “Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction”, Comité Européen de Normalisation, European standard EN 13242.
CEN, 2004, “Unbound and hydraulically bound mixtures – Part 7: Cyclic load triaxial test for unbound mixtures”, Comité Européen de Normalisation, European standard EN 13286-7.
COST Action 325, 1997, “New Road Monitoring equipment and Methods”, Final Report of the Action, Reference EUR 17547, European Commission, Directorate General Transport.
Cui, Y.-J., 1993, “Etude du comportement d’un limon compacté non saturé et de sa modélisation dans sun cadre élastoplastique”. Thèse de doctorat de l’Ecole nationale des Ponts et Chaussées, Paris.
Cuisinier, O., & Laloui, L., 2004, “Fabric evolution during hydro-mechanical loading of compacted silt”, Int’l J. Numerical & Analytical Methods in Geomech., 28, pp. 483–499.
Delage, P., 2001, “Experimental techniques used in investigation of coupled THMC behaviour of geomaterials”, in Environmental Geomechanics, ed. Charlier, R. & Gens, A., Revue française de genie civil, 5(6), pp. 777–796.
Delage, P., Suraj de Silva, G.P.R. & De Laure, E., 1987, “Un novel appareil triaxial pour les sols non saturés”, Proc. 9th Europ. Conf. Soil Mech. & Foundation Eng’g., 1, pp. 26–28.
Delage, P., Howat, M.D. & Cui, Y.J., 1998, “The relationship between suction and swelling properties in a heavily compacted unsaturated clay”, Engineering Geology, 50, pp. 31–48.
Dineen, K. & Burland, J., 1995, “A new approach to osmotically controlled oedometer testing”, in Proc. 1st Int’l Conf. Unsaturated Soils, Eds. Alonso, E.E. & Delage, P., Balkema/Press des Ponts et Chaussées, Paris, 2, pp. 459–465.
Direkcija Republike Slovenije za ceste, 2002, “Technical specification for roads”: TSC 06.630:2002, Lastnost voznih povrsin Podajnost, Direkcija Republike Slovenije za ceste,Ljubljana.
Dynatest, 1989, “ELMOD/ELCON, Evaluation of Layer Moduli and Overlay Design”, User’s Manual, Dynatest Engineering, Denmark.
Edwards, J.P., Thom, N.H., & Fleming, P.R., 2004, “Development of a simplified test for unbound aggregates and weak hydraulically bound materials utilising the NAT”, in Pavements Unbound (proc. $6^\mathrm{th}$ Int’l. Symp. Unbound Aggregates in Roads, UNBAR6), pp. 3–12, Balkema, Leiden.
Ekblad, J., 2004, “Influence of Water on Resilient Properties of Coarse Granular Materials”, Licenciate Thesis, KTH Civil and Architectural Engineering, Stockholm, Sweden, 107pp.
Ekblad, J. & Isacsson, U., 2006, “Influence of water on resilient properties of coarse granular materials”, Road Materials and Pavement Design, 7(3), pp. 369–404.
Erlingsson, S., 2007, “Numerical Modelling of Thin Pavements Behaviour in Accelerated HVS Tests”, Int’l. J. Road Mat’ls & Pavement Design, 8(4), pp. 719–744.
Erlingsson, S. & Magnusdottir, B., 2002, “Dynamic Triaxial Testing of Unbound Granular Base Course Materials,” Proc. $6 th$ Int’l Conf. Bearing Capacity of Roads, Railways & Airfields, Lisbon, Portugal, pp. 989–1000.
Erlingsson, S., 2000, “Dynamic triaxial testing of unbound base course materials”. Proc. XIII Nordic Geotech.l Conf., NGM 2000, Finnish Geotechnical Society, Helsinki, pp. 69–76.
Gomes-Correia, G., Hornych, P & Akou, Y., 1999, “Review of models and modelling of unbound granular materials”. In G. Gomes-Correia (ed.), Proceedings of an international workshop on modelling and advanced testing for unbound granular materials, Lisbon, Balkema, pp. 3–15.
Head, K.H., 1994, “Manual of Soil Laboratory Testing; Volume 2: Permeability, Shear Strength and Compressibility Tests”, John Wiley & Sons, Inc., 454pp.
Highways Agency, 1999, “Structural Assessment Methods”, HD 29/94, Design Manual for Roads & Bridges, HMSO, London.
Hornych P., Hameury, O. & Paute, J.L., 1998, “Influence de l’eau sur la comportement mécanique des graves non traitées et des sols supports de chaussées”, Symposium Int’l AIPCR sur le Drainage des Chaussées, PIARC/AIPCR, Grenada, Spain, November, pp. 249–257.
Kassif, G. & Ben Shalom, A., 1971, “Experimental relationship between swell pressure and suction”, Géotechnique, 21(3), pp. 245–255.
Komorik, A., Livneh, M. & Smucha, S., 1980, “Shear strength and swelling of clays under suction”, Proc. 4th Int’l Conf. Expansive Soils, Denver, 1, pp. 206–226.
Korkiala-Tanttu, L. & Dawson, A.R., 2007, “Relating Full-Scale Pavement Rutting to Laboratory Permanent Deformation Testing”, Int’l. Jnl. Pavement Eng., 8(1), pp. 19–28.
Krarup, J., 1995, “Bearing Capacity and Water, Part III: Measured Pavement Performance”, Danish Road Institute, note 253.
Laloui, L., Péron, H., Geiser, F., Rifa’i, A. & Vulliet, L., 2006, “Advances in volume measurement in unsaturated triaxial tests”, Soils and Foundations, 46(3), pp. 341–350.
Marcial, D., Delage, P. & Cui, Y.J., 2002, “On the high stress compression of bentonites, Canadian Geotech. J., 39, pp. 812–820.
Pavšič, P., 2006, “Influence of water on mechanical behaviour of soils and aggregates”, in Active geotechnical design in infrastructure development, edited by Logar, J., Gaberc, A., and Majes, B., Slovensko geotehniško društvo (Slovenian Geotechnical Society), Ljubljana, 2, pp. 109–111.
Petkovšek, A., Kokot, D., Leben, B. & Pavšič, P., 2003, “Influence of seasonal moisture and temperature changes in unbound layers on bearing capacity and deformability of pavements: research report (2000–2003)”, Final Report, (Sezonski vplivi spreminjanja vlage in temperature v nevezanih plasteh na nosilnost in deformabilnost voziščne konstrukcije: razvojno-raziskovalna naloga (2000–2003), končno poročilo razvojno raziskovalnega projekta), Gradbeni inštitut ZRMK, Zavod za Gradbeništvo Slovenije, Ljubljana.
Péron, H., Hueckel, T. & Laloui, L., 2007, “An improved volume measurement in determining soil water retention curve”, Geotech. Testing J., 30(1), pp. 1–8.
Qian, L, Ye, W. & Chen, B., 2006, “Soil-Water Characteristic Curves and Permeability of Shanghai Soft Soils”, in Unsaturated Soils 2006, Proc. 4th Int’l. Conf. Unsaturated Soils, Eds. Miller, G.A., Zapata, C.E., Houston, S.L. & Fredlund, D.G., Am. Soc. Civil Eng’rs., Geotech. Special Publ’n. 147, pp. 1571–1582.
Semmelink, CJ, Jooste, FJ & de Beer, M, 1997, “Use of the K-mould in determination of the elastic and shear properties of road materials for flexible pavements”, 8th Int. Conf. Asphalt Pavements, II, August, Seattle, Washington, USA, pp. 1643–58.
Sharp, K.G., Vuong, B.Y., Rollings, R.S., Baran, E. & Metcalf, J., 1999, “The Performance of Lateritic Gravel Pavements”, Proc. 1st Acclerated Pavement Testing Conf., Reno, Nevada, Paper CS11-02, 21pp.
Standards Australia, 1995, “Determination of the Resilient Modulus and Permanent Deformation of Granular Unbound Materials”, Australian Standard, AS 1289.6.8.1.
Vuong, B., Sharp, K.G., Baran, E. & Vertessy, N.J., 1994, “The Performance of a Fine-Grained Marginal Material Under Accelerated Loading,” Proc. 17th Australian Road Research Conf., Part 2, Australian Road Research Board, Victoria, Australia, pp. 145–164.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Cekerevac, C. et al. (2009). Water Influence on Mechanical Behaviour of Pavements: Experimental Investigation. In: Dawson, A. (eds) Water in Road Structures. Geotechnical, Geological and Earthquake Engineering, vol 5. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-8562-8_10
Download citation
DOI: https://doi.org/10.1007/978-1-4020-8562-8_10
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-8561-1
Online ISBN: 978-1-4020-8562-8
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)