Abstract
As-produced single-walled carbon nanotube (SWCNT) material is a complex matrix of carbon nanotubes, bundles of nanotubes (nanoropes), non-tubular carbon and metal catalyst nanoparticles. The pulmonary toxicity of material released during manufacture and handling will depend on the partitioning and arrangement of these components within airborne particles. To probe the physicochemical structure of airborne SWCNT aggregates, a new technique was developed and applied to aerosolized as-produced material. Differential Mobility Analysis-classified aggregates were analyzed using an Aerosol Particle Mass Monitor, and a structural parameter Γ (proportional to the square of particle mobility diameter, divided by APM voltage) derived. Using information on the constituent components of the SWCNT, modal values of Γ were estimated for specific particle compositions and structures, and compared against measured values. Measured modal values of Γ for 150 nm mobility diameter aggregates suggested they were primarily composed of non-tubular carbon from one batch of material, and thin nanoropes from a second batch of material — these findings were confirmed using Transmission Electron Microscopy. Measured modal values of Γ for 31 nm mobility diameter aggregates indicated that they were comprised predominantly of thin carbon nanoropes with associated nanometer-diameter metal catalyst particles; there was no indication that either catalyst particles or non-tubular carbon particles were being preferentially released into the air. These results indicate that the physicochemistry of aerosol particles released while handling as-produced SWCNT may vary significantly by particle size and production batch, and that evaluations of potential health hazards need to account for this.
Key words
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Bronikowski M.J., P.A. Willis, D.T. Colbert, K.A. Smith & R.E. Smalley, 2001. Gas-phase production of carbon singlewalled nanotubes from carbon monoxide via the HiPCO® process: A parametric study. J. Vac. Sci. Technol. A.-Vac. Surf. Films 19(4), 1800–1805.
Ehara K., C. Hagwood & K.J. Coakley, 1996. Novel method to classify aerosol particles according to their mass-to-charge ratio — aerosol particle mass analyzer. J. Aerosol Sci. 27(2), 217–234.
Keller A., M. Fierz, K. Siegmann, H.C. Siegmann & A Filippov, 2001. Surface science with nanosized particles in a carrier gas. J. Vacuum Sci. Technol. Vacuum Surf. Films 19(1), 1–8.
Knutson E.O. & K.T. Whitby, 1975. Aerosol classification by electrical mobility: Apparatus, theory, and applications. J. Aerosol Sci. 6, 443–451.
Ku B.K. & A.D Maynard, 2005. Comparing aerosol surface-area measurement of monodisperse ultrafine silver agglomerates using mobility analysis, transmission electron microscopy and diffusion charging. J. Aerosol Sci. 36(9), 1108–1124.
Lam C.-W., J.T. James, R. McCluskey & R.L. Hunter, 2004. Pulmonary toxicity of single-wall carbon nanotubes in mice 7 and 90 days after intratracheal instillation. Toxicol. Sci. 77, 126–134.
Maynard A.D., 1995. The development of a new thermophoretic precipitator for scanning-transmission electron-microscope analysis of ultrafine aerosol-particles. Aerosol Sci. Technol. 23(4), 521–533.
Maynard A.D., P.A. Baron, M. Foley, A.A. Shvedova, E.R. Kisin & V. Castranova, 2004. Exposure to carbon nanotube material: Aerosol release during the handling of unrefined single walled carbon nanotube material. J. Toxicol. Environ. Health 67(1), 87–107.
McMurry P.H., X. Wang, K. Park & K. Ehara, 2002. The relationship between mass and mobility for atmospheric particles: A new technique for measuring particle density. Aerosol Sci. Technol. 36(2), 227–238.
Oberdörster G., A. Maynard, K. Donaldson, V. Castranova, J. Fitzpatrick, K. Ausman, J. Carter, B. Karn, W. Kreyling, D. Lai, S. Olin, N. Monteiro-Riviere, D. Warheit & H. Yang, 2005. Principles for characterizing the potential human health effects from exposure to nanomaterials: elements of a screening strategy. Part. Fiber Toxicol. 2(8): doi:10.1186/1743-8977-2-8.
Park K., D.B. Kittelson & P.H. McMurry, 2004a. Structural properties of diesel exhaust particles measured by transmission electron microscopy (TEM): Relationships to particle mass and mobility. Aerosol Sci. Tech. 38(9), 881–889.
Park K., D.B. Kittelson, M.R. Zachariah & P.H. McMurry, 2004b. Measurement of inherent material density of nanoparticle agglomerates. J. Nanopart. Res. 62(2), 267–272.
Rogak S.N., R.C. Flagan & H.V. Nguyen, 1993. The mobility and structure of aerosol agglomerates. Aerosol Sci. Technol. 18(1), 25–47.
Shvedova A.A., E.R. Kisin, R. Mercer, A.R. Murray, V.J. Johnson, A.I. Potapovich, Y.Y. Tyurina, O. Gorelik, S. Arepalli, D. Schwegler-Berry, A.F. Hubbs, J. Antonini, D.E. Evans, B.K. Ku, D. Ramsey, A. Maynard, V.E. Kagan, V. Castranova & P Baron, 2005. Unusual inflammatory and fibrogenic pulmonary responses to single-walled carbon nanotubes in mice. Am. J. Physiol.-Lung Cell. Mol. Physiol. 289, 698–708.
Shvedova A.A., E.R. Kisin, A.R. Murray, V.Z. Gandelsman, A.D. Maynard, P.A. Baron & V. Castranova, 2003. Exposure to carbon nanotube material: Assessment of the biological effects of nanotube materials using human keratinocyte cells. J. Toxicol. Environ. Health 66(20), 1909–1926.
Warheit D.B., B.R. Laurence, K.L. Reed, D.H. Roach, G.A.M. Reynolds & T.R. Webb, 2004. Comparative pulmonary toxicity assessment of single-wall carbon nanotubes in rats. Toxicol. Sci. 77, 117–125.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Additional information
Disclaimer: The mention of any company or product does not constitute an endorsement by the Centers for Disease Control and Prevention. The findings and conclusions in this paper are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health.
Rights and permissions
Copyright information
© 2006 Springer
About this chapter
Cite this chapter
Maynard, A.D., Ku, B.K., Emery, M., Stolzenburg, M., McMurry, P.H. (2006). Measuring particle size-dependent physicochemical structure in airborne single walled carbon nanotube agglomerates. In: Maynard, A.D., Pui, D.Y.H. (eds) Nanotechnology and Occupational Health. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5859-2_9
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5859-2_9
Received:
Accepted:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5858-5
Online ISBN: 978-1-4020-5859-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)