Abstract
The measurement of viscosity is of significant importance in both industry and academia. Accurate knowledge of viscosity is necessary for various industrial processes. Various theories that are developed for prediction or estimation of viscosity must be verified using experimental data. Instruments used to measure the viscosity of liquids can be broadly classified into seven categories:
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
REFERENCES
A. Dinsdale and F. Moore, Viscosity and its measurement, Chapman and Hall, London (1962).
M. R. Cannon and M. R. Fenske, Viscosity measurement, Ind. Eng. Chem. Analytical Edition. 10(6), 297–301 (1938).
M. R. Cannon and M. R. Fenske, Viscosity measurement, Ind. Eng. Chem. Analytical Edition. 13(5), 299–300 (1938).
M. R. Cannon, R. E. Manning, and J. D. Bell, Viscosity measurement, the kinetic-energy correction and a new iscometer, Anal. Chem. 32, 355–358 (1960).
Y. A. Pinkevich, New viscometer for the determination of the viscosity of petroleum products at low temperatures, Petroleum (London), 8, 214–215 (1945).
E. H. Zeitfuchs, An accurate kinematic viscometer for refinery-control laboratories, Proc. Am. Petroleum Inst 9th Mid-Year Meeting, Sect. III, 20, 104–114 (1939a).
E. H. Zeitfuchs, Modified Ostwald viscometer for routine control tests [at petroleum refineries], National Petroleum News, 31(24), 262–3 (1939b).
E. H. Zeitfuchs, Speeds viscosity measurement in capillary-type viscometer, National Petroleum News, 33(16), R-121–124 (1941).
E. L. Ruh, R. W. Walker, and E. W. Dean, The S.I.L. viscometer, Ind. Eng. Chem. Anal. Ed. 13(5), 346–349 (1941).
IPT (Institution of Petroleum technologists, London), Standard Methods for Testing Petroleum and Its Products, 3rd ed 171–177 (1935).
L. Ubbelohde, The suspended-level viscometer, J. Inst. Petro. 22, 32–41 (1936).
L. Ubbelohde, The viscometer with suspended level. (The elimination of the influence of the surface tension by the suspended spheric level.), J. Inst. Petro. 23, 427–51 (1937).
O. Fitzsimons, A rapid precision viscometer, Ing. Eng. Chem Anal. Ed. 7, 345–347 (1935).
J. J. Watt and C. E. Headington, New viscometer solves old problems, Petroleum Refiner, 33(10), 121–125 (1954).
M. R. Cannon and M. R. Fenske, Viscosity measurement, Ind. Eng. Chem. Anal. Ed., 13, 299–300 (1941).
E. H. Zeitfuchs, Kinematic viscometer for opaque and very viscous liquids, Oil and Gas J. 44(36), 99–102 (1946).
J. F. Johnson, R. L. LeTourneau, and R. Matteson, All-Purpose Capillary Viscometer, 24(9), 1505–1508 (1952).
A. W. Nash and A. R. Bowen, The principles and Practice of Lubrication, Chapman and Hall, London (1929).
T. B. Stillman, The Examination of Lubrication Oils, The Chemical Publishing Co., Easton, PA, USA (1914).
A. H. Gill, Oil Analysis, J.B. Lippicott Company, PA, USA (1927).
E. A. Zahn, New viscometer measures viscosity quickly and accurately, Chem Industries, 51(2), 220 (1942).
E. E. Klaus, F. M. Angeloni, and M. R. Fenske, Development and Application of the PRL Single Pass Capillary Viscometer, ASTM STP NO. 299 (1962).
S. W. Rein and D. L. Alexander, Development of a high shear rate capillary viscometer, SAE Paper No. 800363 (1980).
E. E. Graham, E. E. Klaus, and R. S. Badgley, Determination of the viscosity shear behavior of polymer containing fluids using a single pass, high shear capillary viscometer, SAE Paper No. 841391 (1984).
R. E. Manning and W. A. Lloyd, Multicell high temperature high shear capillary viscometer, SAE Paper No. 861562 (1986).
M. Couette, Études sur le frottement des liquids, Ann. Chim. (Phys), 21,433–510 (1890).
E. Hatschek, The General Theory of the Viscosity of Two-phase Systems. Trans. Faraday Sco. 9, 80–93 (1913).
A. Mallock, Determination of the viscosity of water, Proc. Roy. Soc. 45, 126–132 (1888).
C. H. Lindsley and E. K. Fisher, End-effect in rotational viscometers, J. Appl. Phys. 18, 988–996 (1947).
D. J. Highgate and R. W. Whorlow, Migration of particles in a polymer solution during cone and plate viscometry, Polym. Syst Proc. Annu. Conf. Brit. Soc. Rheol. Ed, Wetton, R. E. Macmillan, London, UK, 251–261 (1968). D. J. Highgate and R. W. Whorlow, End effects and particle migration effects in concentric cylinder rheometry, Rheologica Acta, 8(2), 142–151 (1969).
H. Kobayashi, T. Nashima, Y. Okamoto, and F. Kaminaga, End effect in a coaxial cylindrical viscometer, Rev. Sci. instrum. 62(11), 2748–2750 (1991).
O. Wein and V. V. Tovchigrechko, Rotational viscometry under presence of apparent wall slip, J. Rheology, 36(5), 821–844 (1992).
G. Palma, G. Pezzin, and L. Busulini, Viscous heating in coaxial cylinder viscometers, Rheologica Acta, 6(3), 259–264 (1967).
D. C. H. Cheng., The calibration of coaxial cylinder viscometers for Newtonian and non-Newtonian viscosity measurement, Theor. Appl. Rheol. Proc. Int. Congr. Rheol. 11th, 2, 902–903 (1992).
J. C. Harper, Coaxial cylinder viscometer for non-Newtonian fluids, Rev. Sci. Instrum. 32, 425–428 (1961).
E. W. Merrill, Coaxial-cylinder viscometer for non-Newtonian fluids, ISA J. 3, 124–128 (1956).
T. Nagy and K. Koczo, Correction of data measured with a rotational viscometer in the case of non-Newtonian liquids, 31(4), 221–231 (1987).
N. Adams, and A. S. Lodge, Rheological properties of concentrated polymer solutions II. A cone-and-plate and parallel-plate pressure distribution apparatus for determining normal stress differences in steady shear flow, Phil. Trans. Royal Soc. (London). Series A, Mathematical and Physical Sciences, 256(1068), 149–184 (1964).
K. Walters, Rheometry, Chapman and Hall, London (1975).
M. J. Miller and E. B. Christiansen, The stress state of elastic fluids in viscometric flow, AIChE J. 18(3), 600–608 (1972).
W. M. Kulicke, G. Kiss, and R. S. Porter, Inertial normal-force corrections in rotational rheometry, Rheologica Acta, 16(5), 568–572 (1977).
P. J. Whitcomb and C. W. Macosko, Rheology of xanthan gum, J. Rheology, 22(5), 493–505 (1978).
R. M. Turian, Perturbation solution of the steady Newtonian flow in the cone and plate and parallel plate systems, Ind. Eng. Chem. Fundam. 11(3), 361–368 (1972).
J. S. Vrentas, P. C. Venerus, and C. M. Vrentas, An exact analysis of reservoir effects for rotational viscometers, Chem. Eng. Sci. 46(1), 33–37 (1991).
R. I. Tanner, Trans. Soc. Rheol. 14, 483–507 (1970).
O. Olabisi and M. C. Williams, Secondary and primary normal stresses, hole error, and reservoir edge effects in cone-and-plate flow of polymer solutions, Trans. Soc. Rheol. 16(4), 727–769 (1972).
R. B. Bird and R. M. Turian, Viscous heating effects in a cone-and-plate viscometer, Chem. Eng. Sci. 17, 331–334 (1962).
R. M. Turian and R. B. Bird, Viscous heating in the cone-and-plate viscometer. II. Newtonian fluids with temperature-dependent viscosity and thermal conductivity, Chem. Eng. Sci. 18 689–896 (1963).
R. M. Turian, Viscous heating in the cone-and-plate viscometer. Non-Newtonian fluids with temperature-dependent viscosity and thermal conductivity, Chem. Eng. Sci. 20, 771–781 (1965).
T. C. Ho, Viscous heating effects of a torsional flow between two circular plates, J. Chinese Inst. Chem. Eng. 2(1), 75–77 (1971).
F. Rieger, Viscous heating effect in a cone and plate viscometer, Chem. Eng. Sci. 25(1), 219–220 (1970).
B. Liu, Secondary Flow and Misalignment in Cone-and-Plate Rheometry, Ph.D. Dissertation, Diss. Abstr. Int B 2003, 64(3), 1371 (2003).
D. C. H. Cheng, Effect of secondary flow of the viscosity measurement using the coneand-plate-viscometer, Chem. Eng. Sci. 23(8), 895–899 (1968).
K. R. Sharma, Tangential stress corrections to the cone and plate viscometer calculations, Abstracts of Papers, 223rd ACS National Meeting, April 7–11, 2002, Orlando, FL, USA (2002).
H. Shankaran and S. Neelamegham, Nonlinear flow affects hydrodynamic forces and neutrophil adhesion rates in cone-plate viscometers, Biophysical J. 80(6), 2631–2648 (2001).
D. J. Highgate, Particle migration in cone-plate viscometry of suspensions, Nature, 211(5056), 1390–1391 (1966).
S. Oka, Theory of a cone-plate viscometer for non-Newtonian liquids, Jap J. Appl. Phys. 6(2), 258–262 (1967).
E. O. Forster and H. H. Horowitz, Application of the cone-plate viscometer to non-Newtonian systems, Am. Soc. Testing Mater. Spec. Tech. Publ. No. 299, 85–95 (1962).
R. J. Brungraber, T. E. Stelson, and H. G. Wenzel, Modification of cone-plate viscometer to eliminate slip caused by wall effects, Rev. Sci. Instr. 37(5), 669–570 (1966).
M. Mooney and R. H. Ewart, The conicylindrical viscometer, Physica (The Hague), D5, 350–354 (1934).
G. H. Piper and J. R. Scott, Rubber plastometer with uniform rate of shear -shearingcone plastometer, J. Sci. Instrum. 22, 206–210 (1945).
R. S. Higginbotham, A cone and plate viscometer, J. Sci. Instrum. 27, 139–141 (1950).
R. S. Higginbotham and J. J. Benbow, Two viscometers for rapid measurements at definite shearing stresses, J. Sci. Instrum. 29, 221–224 (1952).
H. Markovitz, L. J. Elyash, F. J. Padden, and T. W. deWitt, A cone-and-plate viscometer, J. Collid. Sci. 10, 165–173 (1955).
A. Jobling and J. E. Roberts, An investigation, with the Weissenberg Rheogoniometer, of the stress distribution in flowing polyisobutylene solutions at various concentrations and molecular weights, J. Polym. Sci. 36, 433–441 (1959).
K. A. Lammiman and J. E. Roberts, Notes on the measurements of viscoelasticity in materials of high viscosity, Lab. Pract. 10, 816–824 (1961).
R. J. Russell, Ph.D. Dissertation, London University (1946).
R McKennell, Versatile cone and plate viscometer with automatic flow curve recording, Proceedings of the Second International Congress on Rheology; Ed. V. G. W. Harrison, Butterworths, London, 350–358 (1954).
J. C. Chang, F. F. Lange, and D. S. Pearson, Viscosity and yield stress of alumina slurries containing large concentrations of electrolyte, J. Am. Ceram. Soc. 77(1), 19–26 (1994).
L. Wang, W. Sigmund, and F. Aldinger, Systematic approach for dispersion of silicon nitride powder in organic media, ii, dispersion of the powder, J. Am. Ceram. Soc. 83(4), 697–702 (2000).
M. Mooney, A shearing disk plastometer for unvulcanized rubber, Ind. Eng. Chem. Analy. Ed. 6(2), 147–151 (1934).
D. M. Ball, Rotational Viscosity Measurement Apparatus, US Patent No. 5987970 (1999).
J. P. Dickerson, L. M. Flesher, and R. D. Hester, A high Reynolds number rotating disk rheometer, J. Appl. Poly. Sci. 53(2), 151–159 (1994).
A. F. Borghesani and M. Santini, Magnetic rotating disk viscometer, Inter. J. Thermophys. 10(5), 917–27 (1989).
L. Bruschi, M. Santini, G. Torzo, Rotating disk viscometer, J. Physics E, Scientific Instruments 17(4), 312–16 (1984).
F. C. Goodrich and A. K. Chatterjee, Theory of absolute surface shear viscosity. II. Rotating disk problem, J. Coll. Inter. Sci. 34(1), 36–42 (1970).
M. M. Cross and A. Kaye, Simple procedures for obtaining viscosity/shear rate data from a parallel disc viscometer, Polymer, 28(3), 435–340 (1987).
S. J. Perry, J. M. Castro, and C. W. Macosko, A viscometer for fast polymerizing systems, J. of Rheology, 29(1), 19–36 (1985).
O. Wein, Viscometric flow under apparent wall slip in parallel-plate geometry, J. Non-Newtonian Fluid Mechanics, 126(2–3), 105–114 (2005).
A. Oztekin and R. A. Brown, Instability of a viscoelastic fluid between rotating parallel disk. Analysis for the Oldroyd-B fluid, J. Fluid Mech. 255, 473–502 (1993).
Y. I. Cho, The study of non-Newtonian flows in the falling ball viscometer, Ph. D. Dissertation, University of Illinois, Chicago, IL, USA. Diss. Abstr. Int. B, 41(1), 304–305 (1980).
Y. I. Cho, J. P. Hartnett, and E. Y. Kwack, A study of wall effect for viscoelastic fluids in the falling ball viscometer, Chem. Eng. Comm. 6(1–3), 141–149 (1980).
H. Faxen, Die bewegung einer starren kugel langs der achse eines mit zaherer fussigkeit gefullten rohres, Arkiv. Mat. Astronom. Fys. 17(1), 45–46 (1923).
T. Bohlin, On the drag on a rigid sphere moving in a viscous liquid inside a cylindrical tube, Trans. R. Inst. Tech. (Stockholm), 155, 1–63 (1960).
W. L. Haberman and R. M. Sayre, David Taylor Model Basin, Report No. 1143, U.S. Navy Department, Washington DC. (1958).
H. Brenner, and H. Happel, Slow viscous flow past a sphere in a cylindrical tube, J. Fluid Mech. 4, 195–213 (1958).
S. Feng, A. L. Graham, P. T. Reardon, J. Abbot, and L. Mondy, Improving Falling Ball Tests for Viscosity Determination, J. Fluids Eng. 128(1), 157–163 (2006).
M. Brizard, M. Megharfi, E. Mahe, and C. Verdier, Design of a high precision fallingball viscometer, Rev. Sci. Instr. 76(2), 1–6 (2005).
J. Wang, F. Reitz, T. Donaldson, and L. Pagliaro, A computer-interfaced falling ball viscometer, J. Biochem. Biophys. Methods, 28(4), 251–261 (1994).
S. Sicars, U. Hesse, and W. K. Snelson, A new falling ball viscometer for measurement of the viscosity of refrigerants and mixtures, Actes Congr. Int. Froid, 18th, 2, 418–422.
C. B. Lindemann and R. Rikmenspoel, Simple viscometer for samples less than 1 ml, J. Physics E, Scientific Instruments, 5(2), 178–179 (1972).
R. M. Hubbard and G. G. Brown, The rolling ball viscometer, Ind. Eng. Chem. Anal. Ed. 15, 212–218 (1943).
A. E. Flowers, Viscosity measurement and a new viscosimeter, Proc. Am. Soc. Testing Materials, 14(II), 565–616 (1914).
M. D. Hersey, The theory of the torsion and rolling-ball viscosimeters, and their use in measuring the effect of pressure on viscosity, J. Wash. Acad. Sci. 6, 525–530 (1916).
B. H. Sage, Measurement of Viscosities of Liquids Saturated with Gases at High Pressures, Ind. Eng. Chem. Anal. Ed. 5, 261–263 (1933).
F. Hoeppler, The eccentric fall of spheres through liquids or gases in cylinders, Z. Tech. Physik, 14, 165–169 (1933).
S. Sawamura, N. Takeuchi, K. Kitamura, and Y. Taniguchi, High pressure rolling-ball viscometer of a corrosion-resistant type, Rev. Sci. Instrum. 61(2), 871–873 (1990).
M. Izuchi and K. Nishibata, A high pressure rolling-ball viscometer up to 1 GPa, Jap. J. Appl. Phys. Part 1, Regular Papers, Short Notes & Review Papers, 25(7), 1091–1096 (1986).
K. Nishibata and M. Izuchi, A rolling ball viscometer for high pressure use, Physica B+C, Physics of Condensed Matter + Atomic, Molecular and Plasma Physics, Optics (Amsterdam), 139–140(1–3), 903–906 (1986).
E. M. Stanley and R. C. Batten, Rolling-ball viscometer for measuring viscosity of fluids at high pressures and moderate temperatures, Anal. Chem. 40(11), 1751–1753 (1968).
D. E. Harrison and R. B. Gosser, Rolling ball viscometer for use at temperatures to 400 K under pressures to 5 kilobar, Rev Sci. Instru. 36(12), 1840–1843 (1965).
R. B. Bird and R. M. Turian, Non-Newtonian flow in a rolling-ball viscometer, Ind. Eng. Chem. Fundm. 3(1), 87 (1964).
M. Carreira and E. Becerro, Theory of inclined-tube and rolling-ball viscometers. I. Hydrodynamic treatment, Anales de Quimica. 64(3), 263–274 (1968a).
Carreira, M and Becerro, E, Theory of inclined-tube and rolling-ball viscometers. II. Dimensional análisis, Anales de Quimica, 64(3), 275–282 (1968b).
M. A. Hasan, Calibration of rolling ball viscometer in the intermediate Reynolds number region, Can. J. Chem. Eng. 61(4), 607–611 (1983).
B. J. Briscoe, P. F. Luckham, S. R. Ren, An assessment of a rolling-ball viscometer for studying non-Newtonian fluids, Colloids and Surfaces, 62(1–2), 153–162 (1992).
P. W. Bridgman, Effect of pressure on the viscosity of 43 pure liquids, Proc. Am. Acad. Arts Sci. 61, 57–99 (1926).
R. K. Y. Chan and D. A. Jackson, An automated falling-cylinder high pressure laser-Doppler viscometer, J. Physics E: Scientific Instruments. 18(6), 510–515 (1985).
A. G. Ovcharenko and L. N. Glemba, Falling cylinder viscosimeter for studying viscosity of liquids for a wide range of conditions, in Teplofiz. Svoistva Uglevodorodov Nefteprod, Ed. G. I. Cherednichenko, 115–121 (1983).
N. A. Park and T. F. Irvine, Jr., Falling cylinder viscometer end correction factor, Rev. Sci. Instrum. 66(7), 3982–3984 (1995).
E. G. Wehbeh, T. J. Ui, and R. G. Hussey, End effects for the falling cylinder viscometer, Phys. Fluids A, Fluid Dynamics, 5(1), 25–33 (1993).
M. C. S. Chen and G. W. Swift, Analysis of entrance and exit effects in a falling cylinder viscometer, AIChE J. 18(1), 146–149 (1972).
J. A. Lescarboura and G. W. Swift, Effect of eccentricity on the terminal velocity of the cylinder in a falling cylinder viscometer. Experimental verification for Newtonian fluids, AIChE J. 14(4), 651–652 (1968).
M. C. S. Chen, J. A. Lescarboura, and G. W. Swift, Effect of eccentricity on the terminal velocity of the cylinder in a falling-cylinder viscometer, AIChE J. 14(1), 123–127 (1968).
F. J. Eichstadt and G. W. Swift, Theoretical analysis of the falling-cylinder viscometer for power law and Bingham plastic fluids, AIChE J. 12(6), 1179–1183 (1966).
E. Ashare, B. R. Bird, and J. A. Lescarboura, Falling cylinder viscometer for non-Newtonian fluids, AIChE J. 11(5), 910–916 (1965).
V. B. Borisov, The equation for a falling-cylinder viscometer, High Temperature (Translation of Teplofizika Vysokikh Temperatur), 36(2), 293–298 (1998).
F. Gui and T. F. Irvine, Jr Theoretical and experimental study of the falling cylinder viscometer, Inter. J. Heat and Mass Transfer, 37(1), 41–50 (1994).
J. Lohrenz, Experimentally Verified Theoretical Analysis of the Falling-Cylinder Viscometer, Ph.D. Dissertation, University of Kansas, Lawrence, KS, USA, Dissertation Abstract, 21, 2650 (1961).
N. A. Park and T. F. Irvine, Jr., The falling needle viscometer -A new technique for viscosity measurements, Warme und Stoffubertragung, 18, 201–206 (1984).
N. A. Park and T. F. Irvine, Jr., Measurement of rheological fluid properties with the falling needle viscometer, Rev. Sci. Instrum. 59(9), 2051–2058 (1988a).
N. A. Park and T. F. Irvine, Jr., The falling needle viscometer -A new technique for viscosity measurements, American Laboratory, 20(11), 57–60, 62–63 (1988b).
N. A. Park and T. F. Irvine, Jr., A multipurpose falling needle viscometer to measure thermophysical properties of Newtonian and non-Newtonian fluids, American Laboratory, 21(12-A), 8–9 (1989).
N. A. Park Y. I. Cho, and T. F. Irvine, Jr., Steady shear viscosity measurements of viscoelastic fluids with the falling needle viscometer, J. Non-Newtonian Fluid Mechanics, 34(3), 351–357 (1990).
N. A. Park and T. F. Irvine, Jr., Multifunctional falling needle viscometer to measure thermophysical properties of Newtonian and non-Newtonian fluids, Applications in Surface Phenomena and Additives in Water-Based Coatings and Printing Technology, Ed. M. K. Sharma, Plenum Press, New York, 241–253 (1991).
T. F. Irvine, Jr N. A. Park, F. L. Gui, and S. S. Park, A high pressure falling needle viscometer, in Theor. Appl. Rheol Proc. Int. Congr. Rheol 11th, Editor(s), Moldenaers, P. and Keunings, R Elsevier, Amsterdam, Netherlands, 2, 985–987 (1992).
I. Kim, T. F. Irvine, Jr., and N. A. Park, Experimental study of the velocity field around a falling needle viscometer, Rev. Sci. Instrum. 65(1), 224–228 (1994).
D. B. Thiessen and W. B. Krantz, Bimodal terminal velocities using the falling needle viscometer, Rev. Sci. Instrum. 63(9), 4200–4204 (1992).
Z. S. Sha, The improvement on the falling needle viscometer, Rev. Sci. Instrum. 68(4), 1809–1811 (1997).
A. M. J. Davis and H. Brenner, The falling-needle viscometer, Physics of Fluids, 13(10), 3086–3088 (2001).
A. M. J. Davis, Limitation on the use of slender-body theory in Stokes flow, Falling needle viscometer, Physics of Fluids, 16(11), 4204–4205 (2004).
J. F. Steffe, Rheological Methods in Food Process Engineering, Freeman Press, East Lansing, MI, USA (1996).
A. Sieben, A recording bridge viscometer, Anal. Biochem. 63(1), 220–230 (1975).
W. Roth and S. R. Rich, A new method for continuous viscosity measurement. General theory of the ultra-viscoson, J. Appl. Phys., 24, 940–950 (1953).
I. N. Kogan, L. I. Menes, and N. Y. Parlashkevich, Continuous viscosity measurement with an ultrasonic viscometer, Veshchestva, 10, 33–45 (1960).
N. Y. Parlashkevich and I. N. Kogan, Determining the viscosity of concentrated polymer solutions with an ultrasonic viscometer, Plasticheskie Massy, 1, 49–52 (1965).
S. G. R. Ruttle and M. I. Stephenson, A high-pressure ultrasonic viscometer, in Ultrason. Int. Conf. Proc. Ed. L. J. Browne, I, 224–227, IPC Sci. Technol. Press, Guildford, England (1975).
K. Burdova and M. Porubska, New method for measuring the viscosities of dilute solutions using an ultrasonic viscometer, Makrotest, 67–69 (1980).
V. N. Bindal, M. Chandra, and J. N. Som, An ultrasonic viscometer for the measurement of dynamic shear viscosity of liquids, Indian J. Pure and Appl. Phys., 21(3), 176–179 (1983).
S. H. Sheen, H. T. Chien, and A. C. Raptis, An ultrasonic instrument for measuring density and viscosity of tank waste, in Science and Technology for Disposal of Radioactive Tank Wastes, Proceedings of the American Chemical Society Symposium on Science and Technology for Disposal of Radioactive Tank Wastes, Ed. W. W. Schulz and N. J. Lombardo, 439–447, Plenum, New York, N. Y. (1998).
M. S. Greenwood and J. A. Bamberger, Ultrasonic sensor to measure the density of a liquid or slurry during pipeline transport, Ultrasonics, 40(1), 413–417 (2002).
M. S. Greenwood and J.C. Lail, Ultrasonic Fluid Densitometry and Densitometer, US Patent 5,708,191 (1998).
M. S. Greenwood and R.V Harris, Pitch-catch Only Ultrasonic Fluid Densitometer, US Patent 5,886,250 (1999).
M. S. Greenwood, J. R. Skorpik, J. A. Bamberger, and R. V. Harris, On-line ultrasonic density sensor for process control of liquids and slurries, Ultrasonics, 37, 159–171 (1999).
D. J. Highgate and R. W. Whorlow, End effects and particle migration effects in concentric cylinder rheometry, Rheologica Acta, 8(2), 142–151 (1969).
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer
About this chapter
Cite this chapter
Viswanath, D.S., Ghosh, T.K., Prasad, D.H., Dutt, N.V., Rani, K.Y. (2007). VISCOMETERS. In: Viscosity of Liquids. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5482-2_2
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5482-2_2
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5481-5
Online ISBN: 978-1-4020-5482-2
eBook Packages: EngineeringEngineering (R0)