Investigations into Continuous Extrusion

  • B. Lengyel
  • Sepehr Kamyab-Tehrani
Chapter

Summary

Apparatus has been built for experimental investigations into continuous extrusion. Two materials have been extruded at various ratios and correlation between the process parameters has been found by the simultaneous recording of extrusion load, displacement of the feed stock and power requirement.

While the method which was investigated is primarily suitable for the extrusion of wire, further considerations indicate that the continuous hot extrusion of large billets into rods and tubes of various sections might also become feasible.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    ALEXANDER, J.M. and LENGYEL, B. “Semi-continuous hydrostatic extrusion of wire”. Proc. Inst. Mech. Engrs., 1965–66, 180, Part 31.Google Scholar
  2. 2.
    SLATER, H.K. and GREEN, D. “Augmented hydrostatic extrusion of continuous bar”. Proc. Inst. Mech. Engrs., 182, 1967–68, p. 217.Google Scholar
  3. 3.
    PUGH, H.L1.D. “An intermittent (semi-continuous) hydrostatic extrusion machine”. NEL Report No. 344 (1968).Google Scholar
  4. 4.
    LENGYEL, B. and ASHFORD, P.G. “An experimental pre-production unit for semi-continuous hydrostatic extrusion”. Proc. 8th Int. M.T.D.R. Conference, Sept. 1967.Google Scholar
  5. 5.
    SAID, M.E. and ALEXANDER, J.M. “Design of clamping devices for semi-continuous hydrostatic extrusion”. North American Metalworking Research Conference, May 1975.Google Scholar
  6. 6.
    FUCHS, F.J. and SCHMEHL, G.L. “Continuous hydrostatic extrusion”. NEL/ AIRAPT Int. Conf. on Hydrostatic Extrusion, University of Stirling, Scotland, 2, p. 334, 1973.Google Scholar
  7. 7.
    GREEN, D. “The continuous extrusion-forming of wire sections”. J. Inst. Metals, 100, p. 295, 1972.Google Scholar
  8. 8.
    LENGYEL, B. “Continuous extrusion”. Provisional British Patent Specification No. 262/1976.Google Scholar
  9. 9.
    LENGYEL, B. and BLASS, A. “Temperature distribution in the radial upsetting of a flat disc”. Second North American Metalworking Research Conference, University of Wisconsin-Madison, May 1974.Google Scholar
  10. 10.
    KAMYAB-TEHRANI, SEPEHR. “Continuous extrusion of wire with frictional drag feeding”. M.Sc. thesis, University of London, 1975.Google Scholar
  11. 11.
    AVITZUR, B. “Extrolling: a concept of continuous wire making machines”. Society of Manufacturing Engineers, Paper No. MF 75–140, 1976.Google Scholar
  12. 12.
    BLACK, J.T., VOORHES, W.G. and BRENEISER, D. “Linex — linear continuous extrusion of metals”. Society of Manufacturing Engineers, Paper No. MF 75-l4l, 1976.Google Scholar

Copyright information

© The Department of Mechanical Engineering, University of Birmingham 1977

Authors and Affiliations

  • B. Lengyel
    • 1
  • Sepehr Kamyab-Tehrani
    • 1
  1. 1.Department of Mechanical EngineeringImperial CollegeLondonUK

Personalised recommendations