Summary
This paper presents the programming system REKONE for computer-aided design of closed-loop-controlled electrical feed drives for NC machine tools. It permits the user (machine tool or drive manufacturer), by means of a problem-orientated free-formated input language, to formulate his input demands for the drive. With the aid of mathematical models for position- and speed-controlled feed drives, which represents the connection between the input variables (command variables and disturbance variables) and the desired output variables, the critical variables for the layout of the drive may be calculated.
The program structure, the necessary input variables, the processing of the program and the selection result are described. A practical example shows that the program represents an aid for the designer, permitting him to make a safe and certain choice of a suitable drive for his particular machine tool.
Preview
Unable to display preview. Download preview PDF.
References
G. Spur, “Optimierung des Fertigungssystems Werkzeugmaschine”, München: Carl Hanser Verlag, 1972.
K. Boelke, “Analyse und Beurteilung von Lagesteuerungen für numerisch gesteuerte Werkzeugmaschinen”, Diss. TU Stuttgart, 1977.
G. Stute, “Die Lageregelung an Werkzeugmaschinen”, ISW-Selbstverlag, 1975.
R.D. Phelps, “Computer-Assisted Servo Selection for NC Machine Tools”, Control Engineering, Vol.21 (1974) pp. 143–144.
G. Stute, U. Ackermann, K.H. Böbel, “Rechnerunterstützte Konstruktion geregelter elektrischer Vorschubantriebe”, Karlsruhe: Kernforschungszentrum Karlsruhe mbH, CAD-Bericht KFK-CAD 21, Jan. 1977.
U. Ackermann, K.H. Böbel, “Rechnerunterstützte Auswahl von elektrischen Vorschubantrieben”, wt — Z.ind. Fertigung 66 (1976) pp. 129–136.
G. Stute, “Untersuchung über die Verwendbarkeit von Gleichstrommaschinen als Vorschubantriebe für NC-Werkzeugmaschinen”, VDW-Bericht 1003, 1971.
G. Augsten, “Damit der Antrieb paßt. Berechnung des dynamischen und thermischen Verhaltens für Werkzeugmaschinen”, VDI-Nachrichten Nr. 29, Juli 1976.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1979 Department of Mechanical Engineering, University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Stute, G., Ackermann, U., Böbel, K.H. (1979). Computer Aided Design of Closed Loop Controlled Electrical Feed Drives. In: Davies, B.J. (eds) Proceedings of the Nineteenth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-81412-1_7
Download citation
DOI: https://doi.org/10.1007/978-1-349-81412-1_7
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-81414-5
Online ISBN: 978-1-349-81412-1
eBook Packages: Palgrave Social & Cultural Studies CollectionSocial Sciences (R0)