Abstract
Satisfactory operation of compression ignition engines depends on proper control of the air motion and fuel injection. The ideal combustion system should have a high output (bmep), high efficiency, rapid combustion, a clean exhaust and be silent. To some extent these are conflicting requirements; for instance, engine output is directly limited by smoke levels. There are two main classes of combustion chamber: those with direct injection (DI) into the main chamber, (figure 5.1) and those with indirect injection (ID) into some form of divided chamber (figure 5.5). The fuel injection system cannot be designed in isolation since satisfactory combustion depends on adequate mixing of the fuel and air. Direct injection engines have inherently less air motion than indirect injection engines and, to compensate, high injection pressures (up to 1500 bar and higher) are used with multiple-hole nozzles. Even so, the speed range is more restricted than for indirect injection engines. Injection requirements for indirect injection engines are less demanding; single-hole injectors with pressures of about 300 bar can be used.
Preview
Unable to display preview. Download preview PDF.
Author information
Authors and Affiliations
Copyright information
© 1999 Richard Stone
About this chapter
Cite this chapter
Stone, R. (1999). Compression ignition engines. In: Introduction to Internal Combustion Engines. Palgrave, London. https://doi.org/10.1007/978-1-349-14916-2_5
Download citation
DOI: https://doi.org/10.1007/978-1-349-14916-2_5
Publisher Name: Palgrave, London
Print ISBN: 978-0-333-74013-2
Online ISBN: 978-1-349-14916-2
eBook Packages: EngineeringEngineering (R0)