Abstract
As with the measurement of most other types of building work, it is important to adopt a logical order of taking off. The following order is frequently followed in practice when measuring cold water supply and waste services:
-
(1)
Connection to water authority’s main and all work up to boundary of site, including reinstatement of public highway and provision of stopvalve near the site boundary.
-
(2)
Underground service and rising service/main from site boundary up to cold water storage tank, including any stopvalves, holes through walls, ceilings and floors, insulation to pipes, and the like.
-
(3)
Branches to rising service, such as supply to sink, including any associated work.
-
(4)
Cold water storage tank or cistern and associated work, such as supporting bearers, overflow, cover and insulating lining.
-
(5)
Down services with branches, including any stopvalves, holes through walls, ceilings and floors and insulation to pipes.
-
(6)
Sanitary appliances such as sinks, washbasins, baths and water closets — supply and fixing, including supporting brackets, taps/bib cocks and the like.
-
(7)
Traps and waste pipes to appliances.
-
(8)
Discharge pipes (waste, soil and vent pipes) and associated work.
-
(9)
Any other work connected with the installation, such as painting pipes, marking the position of pipes and testing the installation.
Preview
Unable to display preview. Download preview PDF.
Author information
Authors and Affiliations
Copyright information
© 1999 Ivor H. Seeley and Roger Winfield
About this chapter
Cite this chapter
Seeley, I.H., Winfield, R. (1999). Water, Heating and Waste Services. In: Building Quantities Explained. Building and Surveying Series. Red Globe Press, London. https://doi.org/10.1007/978-1-349-14653-6_13
Download citation
DOI: https://doi.org/10.1007/978-1-349-14653-6_13
Publisher Name: Red Globe Press, London
Print ISBN: 978-0-333-71972-5
Online ISBN: 978-1-349-14653-6
eBook Packages: EngineeringEngineering (R0)