Summary
A finite element modeling of machining of glass fiber reinforced plastics is developed for better understanding of the cutting mechanism. In the modeling, the fracture of both the glass fiber and the polyester matrix during machining is taken into account. A stress criterion is applied to the fracture of the fiber, while a modified strain criterion is applied to the fracture of the matrix. The influences of both the fiber direction angle and rake angle on the cutting mechanism are investigated.
Preview
Unable to display preview. Download preview PDF.
References
W. KÖNIG, C.WULF, P. GRAB and H. WILLERSHEID (1985) Machining of Fibre Reinforced Plastics. Annals of the CIRP 34, p. 537
H.TAKEYAMA, and N. IIJIMA (1988) Machinability of Glassfiber Reinforced Plastics and Application of Ultrasonic Machining. Annals of the CIRP 37, p. 89
J.R. RICE, R.M. McMEEKING, D.M. PARKS and E.P. SORENSEN (1979) Recent Finite Element Studies in Plasticity and Fracture Mechanics. Computer Method in Applied Mechanics and Engineering 17 /18, p. 411
J.C. NAGTEGAAL, D.M. PARKS and J.R. RICE (1974) On Numerically Accurate Finite Element Solutions in the Fully Plastic Range. Computer Method in Applied Mechanics and Engineering 4, p.153
E. USUI, and T. SHIRAKASHI (1982) Mechanics of Machining -From “Descriptive” to “Predictive” Theory-. ASME PED-7, p. 13
T. OBIKAWA, S. AMMI, T. SHIRAKASHI and E. USUI (1987) Finite Element Analysis of Polymer Cutting (1st Report). Japan Journal of Precision Engineering 53, p. 288 (in Japanese)
D. HULL (1982) An Introduction to Composite Materials. Cambridge University Press
C.C. CHAMIS (1974) Mechanics of Load Transfer at the Interface. Composite Materials vol. 6, Interfaces in Polymer Matrix Composite, ed. E.P. Plueddemann, Academic Press, New York, p. 31
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1995 Department of Mechanical Engineering University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Obikawa, T., Shirakashi, T., Usui, E. (1995). Finite Element Modelling of Machining of Glass Fiber Reinforced Plastics. In: Kochhar, A.K. (eds) Proceedings of the Thirty-First International Matador Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-13796-1_35
Download citation
DOI: https://doi.org/10.1007/978-1-349-13796-1_35
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-13798-5
Online ISBN: 978-1-349-13796-1
eBook Packages: EngineeringEngineering (R0)