Summary
A system to generate the geometric information needed for NC machining of a free-form curve is presented in this paper. In this system the geometric model of a curve is generated in the computer from 3-coordinate measuring data of a solid model. To describe the curve mathematicaly, the theory of splines is used. A cutter path for NC machining is generated from the geometric model of the curve.
A new method for cubic spline curve interpolation in NC machining is also presented. The main advantages of this new interpolation method are higher precision and less memory space than that of the straight-line or circular interpolation.
Notes
Lu Jiechi, Yang Jinkui, Mu Lianchun, “Automatic Tracing Measurement and Close Data Collection System of the Free-form Surfaces” Journal of Dalian Institute of Technology Vol.25 No.1/1986
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1988 Department of Mechanical Engineering University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Jie-Chi, L., Zhi, C. (1988). Discrete Data Processing and Cubic Spline Interpolator in NC Machining. In: Davies, B.J. (eds) Proceedings of the Twenty-Seventh International Matador Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-09912-2_29
Download citation
DOI: https://doi.org/10.1007/978-1-349-09912-2_29
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-09914-6
Online ISBN: 978-1-349-09912-2
eBook Packages: EngineeringEngineering (R0)