Abstract
Once the components to be produced within the FMS have been selected, many aspects of the design and manufacturing capability of the system are, almost by default, fixed. At the most superficial level, if the system is to produce rotational components, lathes and perhaps cylindrical grinding machines etc. will be required. If cubic components are to be produced, machining centres and drilling machines etc. are likely to be present. Similarly, if parts or products are to be assembled, one could expect to see assembly robots etc. in the system.
Preview
Unable to display preview. Download preview PDF.
References
R. Tepsic, ‘The parts oriented approach to planning FMS’, FMS Magazine, Vol. 1, No. 2, January 1983.
S. R. Hayashi, C. E. Thomas, R. K. Davis, W. S. Knight and C. R. Roberts, Automatic Tool Touch and Breakage Detection in Turning, General Electric Company, Corporate Research & Development Centre (presented at Hannover Machine Tool Exhibition, September 1985).
J. Jablonowski, ‘What’s new in machining centres’, American Machinist, Special Report, February 1984.
J. Hollingum, ‘Japan’s industry puts its money into FMS’, FMS Magazine, Vol. 1, No. 2, January 1983.
N. W. Rhea, ‘Turbine maker committed to computer integrated manufacturing’, Material Handling Engineering, January 1985.
A. Dickey, ‘Making a tornedo, flexibly’, The Engineer, August 1985.
‘The door has swung open on the age of FMS’, 10th Japan International Machine Tool Fair, Metalworking Engineering and Marketing, January 1981.
R. Baxter, ‘Manufacturing system is revolutionary’, Production Engineer, November 1984.
R. L. Bormann, ‘EDM tackles tough jobs’, Manufacturing Engineering, February 1985.
R. Stokes, ‘Current trends in control’, The Engineer, February 1984.
S. Tulip, ‘What’s new in metalcutting; Colchester launches high volume turning centre in new strategy’, Production Engineer, May 1984.
D. Richardson, ‘Is metal cutting as efficient as it could be’, Production Engineer, June 1984.
‘The all-in-one flexible turning cell for bar and chucking work’, Production Engineer, July/August 1982.
A. Postlethwaite, ‘Is there any hope left?’, Technology, October 1983.
K. Stecke and J. Browne, ‘Variations in flexible manufacturing systems according to the relevant types of material handling systems’, Material Flow 2, Elsevier, 1985.
H. Challis, ‘Machine tool design “outdated” for unmanned operation’, Production Engineer, June 1984.
‘Focus on materials (ceramics and composite)’, New Technology, May 1985.
A. L. Wells, ‘Computer aided maintenance management’, Computers — Chartered Mechanical Engineer, November 1984.
M. Orgorek, ‘Abrasives technology: Bridging the technology gap’, Manufacturing Engineering, December 1984.
‘Implementing quality control — both internally and externally’, Production Engineer, February 1985.
‘Scanning the horizon (centre drive lathes)’, Modern Machine Shop, February 1985.
‘BP develops new cutting fluids’, FMS Magazine, Vol. 2, No. 2, April 1984.
M. J. Bragg, ‘Lasers make light of industrial jobs’, Chartered Mechanical Engineer, May 1985.
L. K. Lord, ‘Machine tools for use in FMS’, FMS Magazine, Vol. 2, No. 4, October 1984.
B. Davis, ‘Has industry seen the light’, The Engineer, April 1985.
A. Kochan, ‘Advanced cutting fluids for advanced manufacturing technology’, FMS Magazine, Vol. 2, No. 1, January 1984.
S. Baker, ‘Feature — adhesives’, Production Engineer, March 1985.
Copyright information
© 1988 Nigel R. Greenwood
About this chapter
Cite this chapter
Greenwood, N.R. (1988). The Processes. In: Implementing Flexible Manufacturing Systems. Palgrave, London. https://doi.org/10.1007/978-1-349-07959-9_5
Download citation
DOI: https://doi.org/10.1007/978-1-349-07959-9_5
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-07961-2
Online ISBN: 978-1-349-07959-9
eBook Packages: EngineeringEngineering (R0)