Skip to main content
SpringerLink
Log in

Experimental Determination of the Dynamic Characteristics of Metal Cutting Process

  • Chapter
Proceedings of the Twenty-Fifth International Machine Tool Design and Research Conference

  • 117 Accesses

Abstract

Self induced vibrations referred to as chatter frequently occur in metal cutting process. The characteristics of the dynamic cutting process is required for prediction of the machine tool chatter. This paper investigates the dynamic characteristics of the Metal Cutting Process mainly in the built-up edge region. The method developed by the author enables one to investigate dynamic cutting process for the said region for two cases of (i) BUE present and (ii) BUE artificially removed by preheating the tool above recrystallization temperature. The dynamic characteristics of the metal cutting process are determined: (a) the BUE region, with BUE and BUE artificially removed for different cutting speeds, (b) for frequency of chip thickness variation, (c) for amplitude of chip thickness variation, and (d) for different temperatures of preheating the tool. The results are presented in the paper.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. S.A. TOBIAS (1965) Machine Tool Vibration, J. Wiley.

    Google Scholar 

  2. E. KOENIGSBERGER and J. TLUSTY (1970) Machine Tool Structures, Pergamon Piess, Oxford.

    Google Scholar 

  3. V.A. KUDINOV (1967) Dynamics of Machine Tools. Mushinostroenie, Moscow (in Russian).

    Google Scholar 

  4. M.M. NIGAM and M.M. SADEK (May 1977) Journal of Engg. for Industry Series B.

    Google Scholar 

  5. V.A. KUDINOV et al (1978) Experimental Investigation of the Nonlinearity of the Dynamic Characteristic of the Cutting Process. Machines and Toolings Vol 49, 11.

    Google Scholar 

  6. B.P. BANDYOPADHYAY (1979) Investigation of Machine Tool Chatter and Characteristics of Dynamic Cutting Process in the Built-up Edge Region. Ph.D Thesis, People’s Friendship University, Moscow.

    Google Scholar 

  7. B.P. BANDYOPADHYAY — Mechanism of Formation of Built-up Edge to be published in Precision Engineering Journal, Butterworth Scientific.

    Google Scholar 

  8. E.M. TRENT (1977) Metal Cutting, Butterworths, London.

    Google Scholar 

  9. N.N. ZOREV (1966) Metal Cutting Mechanics, Pergamon Press, London.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. The University of the West Indies, St Augustine, Trinidad

    B. P. Bandyopadhyay

Authors
  1. B. P. Bandyopadhyay
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, University of Birmingham, UK

    S. A. Tobias (Chance Professor and Head of Department) (Chance Professor and Head of Department)

Copyright information

© 1985 Department of Mechanical Engineering University of Birmingham

About this chapter

Cite this chapter

Bandyopadhyay, B.P. (1985). Experimental Determination of the Dynamic Characteristics of Metal Cutting Process. In: Tobias, S.A. (eds) Proceedings of the Twenty-Fifth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-07529-4_27

Download citation

  • DOI: https://doi.org/10.1007/978-1-349-07529-4_27

  • Publisher Name: Palgrave, London

  • Print ISBN: 978-1-349-07531-7

  • Online ISBN: 978-1-349-07529-4

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation