Advertisement

Fuel Combustion Performance

Chapter
  • 28 Downloads

Abstract

The overall process of combustion of fuel for the generation of power by an open-circuit heat engine comprises the metering of the fuel to the combustion chambers, the preparation of the fuel-oxidant mixture, initiation of ignition, propagation and/or stabilisation of the flame, and subsequent emission of the products. The devices or complete systems used for engine fuel metering represent a separate study, and are covered elsewhere. The remaining topics are determined largely by the type of engine and combustion adopted, and are outlined individually in the following sections.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

8.4 References

  1. 1.
    J. L. Jackson, Spontaneous ignition temperatures of pure hydrocarbons, NACA RM E50J10, 1950Google Scholar
  2. 2.
    ASTM-D2155–66, Standard method of test for autoignition temperature of liquid petroleum products, American Society for Testing and Materials, Philadelphia, PennsylvaniaGoogle Scholar
  3. 3.
    W. Lovell, ‘Knock characteristics of hydrocarbons’, Ind. Eng. Chem., Vol. 40, 1948, pp. 2388–438CrossRefGoogle Scholar
  4. 4.
    E. M. Goodger, Hydrocarbon Fuels, Macmillan, London, 1975Google Scholar
  5. 5.
    W. Houtman, ‘Development of EPA aircraft piston engine emission standards’, Aircraft Piston Engine Exhaust Emission Symposium, Lewis Research Center, Cleveland, NASA CP-2005, September 1976 Google Scholar
  6. 6.
    B. J. Rezy, K. J. Stuckas, J. R. Tucker and J. E. Meyers, Exhaust emissions reduction for intermittent combustion aircraft engines, NASA CR-16794, May 1982Google Scholar
  7. 7.
    R. Friedman, Aviation turbine fuel properties and their trends, SAE 810850, August 1981CrossRefGoogle Scholar
  8. 8.
    ASTM D3343, Standard method for estimation of hydrogen content of aviation fuels, American Society for Testing and Materials, Philadelphia, PennsylvaniaGoogle Scholar
  9. 9.
    C. D. Hurley, Hydrogen content correlation for petroleum and nonpetroleum derived hydrocarbon fuels, NGTE M 81029, July 1981Google Scholar
  10. 10.
    C. C. Gleason, T. L. Oller, M. W. Shayeson and D. W. Bahr, (a) Evaluation of fuel character effects on J79 engine combustion system, AFAPL-TR-79–2015, June 1979, (b) Evaluation of fuel character effects on F101 engine combustion system, AFAPL-TR-79–2018, June 1979Google Scholar
  11. 11.
    R. M. Schirmer, L. A. McReynolds and J. E. Daley, ‘Radiation from flames in gas turbine combustors’, SAE Trans., Vol. 68, 1960, pp. 554–61Google Scholar
  12. 12.
    W. G. Dukek, Survey of hydrogen content of Exxon jet fuels, Technical Division J on Aviation Fuels, Phoenix, Arizona, December 1981Google Scholar
  13. 13.
    J. S. Fear, NASA broad-specification fuels combustion technology program status and description, ASME 80-GT-65Google Scholar
  14. 14.
    H. F. Butze and A. L. Smith, Effect of fuel properties on performance of a single aircraft turbojet combustor at simulated idle, cruise and take-off conditions, NASA TM 73780, September 1977Google Scholar
  15. 15.
    R. M. Schirmer and H. T. Quigg, High pressure combustor studies of flame radiation as related to hydrocarbon structure, Phillips Petroleum Company, Research Division Report 3952–65R, May 1965Google Scholar
  16. 16.
    D. W. Naegeli and C. A. Moses, Effect of fuel molecular structure on soot formation in gas turbine engines, ASME 80-GT-62Google Scholar
  17. 17.
    E. Zahavi, B. Gas-Orr and A. Burcat, ‘Effect of future jet fuel characteristics on adiabatic flame temperatures and combustion products distribution’, J. I. Energy, March 1982Google Scholar
  18. 18.
    J. P. Longwell and J. Grobman, Alternative aircraft fuels, ASME 78-GT-59Google Scholar
  19. 19.
    D. W. Bahr, Impacts of broadened-specifications fuels on aircraft turbine engine combustors, ASME 81-GT-2Google Scholar
  20. 20.
    A. B. Wassell, A U.K. view of future fuels, ASME 81-GT-87Google Scholar
  21. 21.
    A. G. Robertson and R. E. Williams, ‘Jet fuel specifications — the need for change’, Shell Aviation News, No. 435, 1976, pp. 10–13Google Scholar
  22. 22.
    H. F. Butze and R. C. Ehlers, Effect of fuel properties on performance of a single aircraft turbojet combustor, NASA TM X-71789, October 1975Google Scholar
  23. 23.
    R. Roberts, A. Peduzzi and G. E. Vitti, Experimental clean combustor program, Phase II, NASA CR-134970, July 1976Google Scholar
  24. 24.
    E. K. Bastress and R. S. Fletcher, Aircraft engine exhaust emissions, ASME 65-WA/APC-4, November 1969Google Scholar
  25. 25.
    H. Meier Zu Kocker, ‘Kinetics of soot formation-investigations into the mechanism of soot formation in hydrocarbon diffusion flames, Combustion Science and Technology’, Vol. 5, 1972, pp. 219–24CrossRefGoogle Scholar
  26. 26.
    A. M. Mellor, ‘Gas turbine engine pollution’, Prog. Energy Combust. Sci., Vol. 1, 1976, pp. 111–33CrossRefGoogle Scholar
  27. 27.
    W. S. Blazowski and R. E. Henderson, Aircraft exhaust pollution and its effect on the U.S. Air Force, AFAPL-TR-74–64, August 1974Google Scholar

Copyright information

© Eric Goodger and Ray Vere 1985

Authors and Affiliations

  1. 1.Cranfield Institute of TechnologyBedfordUK
  2. 2.Esso Petroleum Co. LtdUK

Personalised recommendations