Abstract
In this investigation, electro chemical creep feed grinding was performed with new type of wheels which were made by electroless plating of Nickel on the conventional WA wheel. This new type of wheel has the same capability of metal removal by itself and it is possible to dress as the conventional wheel. In this report an experimental analysis to get the best condition of making new type of ECG wheel and some applications on un-machinable material are described.
Preview
Unable to display preview. Download preview PDF.
References
T.Okina, New Electrolytic Grinding Wheel, NACHI Report, Vol. 31 (1975)45
K.Ono, T.Shimamura and T.Yamamoto, Study on the Electrolytic Grinding, Jour. Soc. Prec. Mech. Japan, 45–3 1979, 64
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Copyright information
© 1983 Department of Mechanical Engineering University of Manchester Institute of Science and Technology
About this chapter
Cite this chapter
Kita, Y., Ido, M., Kuno, M., Miguchi, A. (1983). Electro Chemical Creep Feed Grinding with Ni-Coated WA Wheel. In: Davies, B.J. (eds) Proceedings of the Twenty-third International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-06546-2_32
Download citation
DOI: https://doi.org/10.1007/978-1-349-06546-2_32
Publisher Name: Palgrave, London
Print ISBN: 978-1-349-06548-6
Online ISBN: 978-1-349-06546-2
eBook Packages: EngineeringEngineering (R0)