Skip to main content
SpringerLink
Log in

The Influence of the Characteristics of Machine Tool Guideways Concerning the Dynamic Behaviour of Machine Tool Slides

  • Chapter
Proceedings of the Fourteenth International Machine Tool Design and Research Conference

  • 13 Accesses

Summary

The vibrations of machine tool slides are dependent to a large extent on the peculiarities of the guideway system carrying the slide. This problem was analysed by applying a practically controlled mechanical-mathematical model and through its calculation by an Elliot-computer. Results are published showing design principles for convenient stiffness and damping relations of the guideway system and for suitable arrangement and measured ratios of this system. The analysis takes in consideration the different critical vibration directions at the diverse sorts of machine tools. A brief summary will be given concerning the influencing factors of guideway stiffness and damping.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Similar content being viewed by others

References

  1. R. ZURMÜHL (1963). Matrizen, Springer Verlag, Berlin.

    Google Scholar 

  2. S. FALK (1966). Numerical systems in technical mechanics. Manuscript, Society Bolyai Budapest.

    Google Scholar 

  3. G. POPPER (1965). Solving algebraic equations of higher degree by electronic computers, NIM IGÜSZI Communications of Computing Technics, Budapest, March.

    Google Scholar 

  4. Gy. HAJDU and Gy. POPPER (1970). The examination of forced vibrations of machine tool slides by electronic computer, SZIM Journals, Halâsztelek, January.

    Google Scholar 

  5. Gy. HAJDU (1970). Statische und dynamische Untersuchungen an Werkzeugmaschinenschlitten mit Gleit—und Rollenführungen. Dissertation, T.U. Dresden.

    Google Scholar 

  6. G. A. LEVIT and B. G. LURJE (1962). Guideway calculation of feeding mechanisms on the basis of friction characteristic curves, Sztanki i Insztrument, January.

    Google Scholar 

  7. Z. M. LEVINA (1961). Selection and calculation of the construction parameters of rolling guideways, ENIMSZ, Moscow, Study-aid.

    Google Scholar 

  8. D. N. RESETOV (1951). Machine tool dimensioning for contact rigidity, Sztanki i Insztrument, January.

    Google Scholar 

  9. H. BOCHMANN (1927). Die Abplattung von Stahlkugeln und Zylindern durch den Messdruck. Dissertation, T.H. Dresden.

    Google Scholar 

  10. A. L. KIMBALL and D. E. LOVELL (1929). Internal friction in solid element, Physical Review, December.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. ‘SZIMFI’ Development Institute of the Machine Tool Works, Pest megye, Halásztelek, H-2314, Hungary

    G. Hajdu

Authors
  1. G. Hajdu
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. University of Manchester Institute of Science and Technology, UK

    F. Koenigsberger (Professor of Machine Tool Engineering) (Professor of Machine Tool Engineering)

  2. Department of Mechanical Engineering, University of Birmingham, UK

    S. A. Tobias (Chance Professor and Head of Department) (Chance Professor and Head of Department)

Copyright information

© 1974 Macmillan Publishers Limited

About this chapter

Cite this chapter

Hajdu, G. (1974). The Influence of the Characteristics of Machine Tool Guideways Concerning the Dynamic Behaviour of Machine Tool Slides. In: Koenigsberger, F., Tobias, S.A. (eds) Proceedings of the Fourteenth International Machine Tool Design and Research Conference. Palgrave, London. https://doi.org/10.1007/978-1-349-01921-2_60

Download citation

  • DOI: https://doi.org/10.1007/978-1-349-01921-2_60

  • Publisher Name: Palgrave, London

  • Print ISBN: 978-1-349-01923-6

  • Online ISBN: 978-1-349-01921-2

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation