Abstract
In a reinforced system there are two principal components, a fibre and a matrix. The function of the fibre is to carry the load applied to the system. The matrix is there primarily to transfer the load from the point of application into the load-bearing fibres which have higher strengths and modulus than the matrix. Of particular commercial interest is glass fibre which is a brittle, as opposed to a ductile, fibre. Besides glass there are other reinforcements, asbestos has been used to some extent and more recently carbon fibre has become very well known.
Preview
Unable to display preview. Download preview PDF.
Bibliography
Marine Design Manual. Gibbs & Cox.
Glass Reinforced Plastics. Edited B. Parkyn.
Fiberglass Reinforced Plastics. R. H. Sonnebonn.
Handbook of Reinforced Plastics of the S.P.I. S. Oleesky & G. Mohr.
Polyester Handbook. Scott Bader & Co. Ltd.
F.R.P. Design Data. Fibreglass Ltd.
Author information
Authors and Affiliations
Editor information
Copyright information
© 1972 Macmillan Publishers Limited
About this chapter
Cite this chapter
Pickthall, D. (1972). Reinforced Plastics. In: Beadle, J.D. (eds) Fabricating Plastics. Macmillan Engineering Evaluations Student Edition. Palgrave, London. https://doi.org/10.1007/978-1-349-01588-7_6
Download citation
DOI: https://doi.org/10.1007/978-1-349-01588-7_6
Publisher Name: Palgrave, London
Print ISBN: 978-0-333-13793-2
Online ISBN: 978-1-349-01588-7
eBook Packages: EngineeringEngineering (R0)