Vehicle Power Management: Basic Concepts

Part of the Power Systems book series (POWSYS)


This chapter focuses on fundamentals and basic concepts of vehicle power management. Several aspects are involved in this chapter as different sections, containing energy consuming effects and vehicle performance, introduction to drive cycles and discussion of vehicle power demand, current power management research in various types of vehicles, and description of major software tools (i.e., MATLAB/Simulink, ADVISOR and PSAT) for structural optimization and verification of control strategies in vehicles.


Fuel Economy Power Management Hybrid Electric Vehicle Internal Combustion Engine Continuous Variable Transmission 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    Smith JH (2001) An introduction to modern vehicle design. Butterworth-Heinemann, OxfordGoogle Scholar
  2. 2.
    Barnett JH, Tataria H (1991) Electric vehicle and battery testing at the electric vehicle test facility. SAE Special Publications, Warrendale, pp 49–60Google Scholar
  3. 3.
    Ekdunge P, Raberg M (1998) Fuel cell vehicle analysis of energy use, emissions and cost. Int J Hydrogen Energy 23:381–385CrossRefGoogle Scholar
  4. 4.
    Mi CC (2006) Analytical design of permanent-magnet traction-drive motors. IEEE Trans Magn 42:1861–1866CrossRefGoogle Scholar
  5. 5.
    Ehsani M, Gao Y, Emadi A (2010) Modern electric, hybrid electric, and fuel cell vehicles: fundamentals, theory and design. CRC Press, Boca Raton, FloridaGoogle Scholar
  6. 6.
    Bogosyan S, Gokasan M, Goering D (2007) A novel model validation and estimation approach for hybrid serial electric vehicles. IEEE Trans Veh Technol 56:1485–1497CrossRefGoogle Scholar
  7. 7.
    Park YK, Park JH, Park JY (2008) Optimal power distribution strategy for series-parallel hybrid electric vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: J Automob Eng 222:989–1000Google Scholar
  8. 8.
    Knebusch M (2004) Toyota prius. Mach Des 76:111Google Scholar
  9. 9.
    Chau KT, Wong YS (2002) Overview of power management in hybrid electric vehicles. Energ Convers Manag 4:1953–1968CrossRefGoogle Scholar
  10. 10.
  11. 11.
    Guzzella L, Sciarretta A (2007) Vehicle propulsion systems: introduction to modeling and optimization, 2nd edn. Springer, BerlinGoogle Scholar
  12. 12.
    Heydinger GJ, Durisck NJ, Coovert DA et al (1994) Overview of a vehicle inertia measurement facility. Road Veh Safe 1994:327Google Scholar
  13. 13.
    Starkey JM (1993) Effects of vehicle design parameters on handling frequency response characteristics. Int J Veh De 14:497–510Google Scholar
  14. 14.
    Graham LA, Noseworthy L, Fugler D et al (2004) Contribution of vehicle emissions from an attached garage to residential indoor air pollution levels. J Air Waste Manage Assoc 54:563–584Google Scholar
  15. 15.
    Particulate. Accessed 30 May 2009
  16. 16.
    Prockop LD, Chichkova RI (2007) Carbon monoxide intoxication: an updated review. J Neurol Sci 262:122–130CrossRefGoogle Scholar
  17. 17.
    Galloway JN et al (2004) Nitrogen cycles: past, present, and future. Biogeochemistry 70:153–226CrossRefGoogle Scholar
  18. 18.
    Hesterberg TW, Lapin CA, Bunn WB (2008) A comparison of emissions from vehicles fueled with diesel or compressed natural gas. Environ Sci Technol 42:6437–6445CrossRefGoogle Scholar
  19. 19.
    Maximum speed. Accessed 10 May 2009
  20. 20.
    Santin JJ, Onder CH, Bernard J et al (2007) The world’s most fuel efficient vehicle: design and development of PAC-car II. vdf Hochschulverlag AG, Bern, SwitzerlandGoogle Scholar
  21. 21.
    Vantsevich VV (2007) Multi-wheel drive vehicle energy/fuel efficiency and traction performance: objective function analysis. J Terramechan 44:239–253CrossRefGoogle Scholar
  22. 22.
    Shmulevich I, Osetinsky A (2003) Traction performance of a pushed/pulled drive wheel. J Terramech 40:33–50CrossRefGoogle Scholar
  23. 23.
    Mi C (2004–2010) Fundamentals of hybrid electric Vehicles. SAE Seminar Lecture NotesGoogle Scholar
  24. 24.
    Driving cycle. Accessed 12 May 2009
  25. 25.
    Lin J, Niemeier DA (2003) Regional driving characteristics, regional driving cycles. Transport Res Part D: Transport Environ 8:361–381CrossRefGoogle Scholar
  26. 26.
    Dynamometer driver’s aid. Accessed 3 May 2009
  27. 27.
    Abdollahi AD (2006) An Intelligent Control Strategy in a Parallel Hybrid Vehicle. ICEHV ‘06 2006:1–2Google Scholar
  28. 28.
    Markel T, Brooker A, Hendricks T et al (2002) ADVISOR: a systems analysis tool for advanced vehicle modeling. J Power Sour 110:255–266CrossRefGoogle Scholar
  29. 29.
    Motoyama S, Uki H, Isoda K et al. (1993) Effect of traction force distribution control on vehicle dynamics. Veh Syst Dyn 22:455–464CrossRefGoogle Scholar
  30. 30.
    Lin CC, Peng H, Grizzle JW et al (2003) Power management strategy for a parallel hybrid electric truck. IEEE Trans Contr Syst Technol 11:839–849CrossRefGoogle Scholar
  31. 31.
    Hartnett P, Miller P, O’Hara M (2000) 42 V Powernet enabling technologies: overview. IEE Colloquium (Digest) 88:1–4Google Scholar
  32. 32.
    Koot M, Kessels JTBA, Jager BD et al (2005) Energy management strategies for vehicular electric power systems. IEEE Trans Veh Technol 54:771–782CrossRefGoogle Scholar
  33. 33.
    Murphey YL (2008) Intelligent vehicle power management–an overview, studies in computational intelligence. Springer, BerlinGoogle Scholar
  34. 34.
    Kiencke U, Nielsen L (2005) Automotive control systems: for engine, driveline, and vehicle, 2nd edn. Springer, BerlinGoogle Scholar
  35. 35.
    Schouten NJ, Salman MA, Kheir NA (2002) Fuzzy logic control for parallel hybrid vehicles. IEEE Trans Contr Syst Technol 10:460–468CrossRefGoogle Scholar
  36. 36.
    Langari R, Won JS (2005) Intelligent energy management agent for a parallel hybrid vehicle-part I: system architecture and design of the driving situation identification process. IEEE Trans Veh Technol 54:925–934CrossRefGoogle Scholar
  37. 37.
    Langari R, Won JS (2005) Intelligent energy management agent for a parallel hybrid vehicle-part II: torque distribution, charge sustenance strategies, and performance results. IEEE Trans Veh Technol 54:935–953CrossRefGoogle Scholar
  38. 38.
    Kolmanovsky I, Siverguina I, Lygoe B (2002) Optimization of powertrain operating policy for feasibility assessment and calibration: stochastic dynamic programming approach. Proceedings of American Control Conference 2:1425–1430Google Scholar
  39. 39.
    Schouten NJ, Salman MA, Kheir NA (2002) Fuzzy logic control for parallel hybrid vehicles. IEEE Trans Contr Syst Technol 10:460–468CrossRefGoogle Scholar
  40. 40.
    Lin CC, Filipi Z, Louca L et al (2004) Modelling and control of a medium-duty hybrid electric truck. Int J Heavy Veh Syst 11:349–370CrossRefGoogle Scholar
  41. 41.
    Simulink-Simulation and model-based design. Accessed 23 May 2009
  42. 42.
    Zhang X, Mi C, Masrur A et al (2008) Wavelet based power management of hybrid electric vehicles with multiple onboard power sources. J Power Sour 185:1533–1543CrossRefGoogle Scholar
  43. 43.
    ADVISOR simulation tool for vehicle evaluation and testing. Accessed 24 May 2009
  44. 44.
    Powertrain systems analysis toolkit (PSAT): A flexible, reusable model for simulating advanced vehicles. Accessed 26 May 2009

Copyright information

© Springer-Verlag London Limited  2011

Authors and Affiliations

  1. 1.Department of Electrical and Computer EngineeringUniversity of Michigan-DearbornDearbornUSA

Personalised recommendations