Automated Vehicle Control

  • Bongsob Song
  • J. Karl Hedrick
Part of the Communications and Control Engineering book series (CCE)


In this chapter all the results of the previous chapters are generalized to include system failures as well as model uncertainties. It is shown the DSC is a passive fault tolerant approach in that it gives robust stability and tracking in the presence of model uncertainties and specific classes of faults. Then, based on the amount of performance loss measured by a quadratic Lyapunov function and information from a fault detection and diagnosis (FDD) system, a fault classification system is developed. The technique is illustrated in the example of vehicle longitudinal controlled designed for an automated highway system (AHS).


Error Dynamic Actuator Fault Fault Classification Fault Tolerant Control Filter Error 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 7.
    Basseville, M., Nikiforov, I.V.: Detection of Abrupt Changes. Prentice Hall, New York (1993) Google Scholar
  2. 10.
    Bow, S.-T.: Pattern Recognition and Image Preprocessing. Dekker, New York (1992) Google Scholar
  3. 19.
    Cho, D., Hedrick, J.K.: Automotive power modeling for control. J. Dyn. Syst. Meas. Control 111, 568–576 (1989) CrossRefGoogle Scholar
  4. 25.
    Frank, P.M.: Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy—a survey and some new results. Automatica 26(3), 459–474 (1990) MATHCrossRefGoogle Scholar
  5. 26.
    Frank, P.M., Ding, X.: Survey of robust residual generation and evaluation methods in observer-based fault detection systems. J. Process Control 7(6), 403–424 (1997) CrossRefGoogle Scholar
  6. 28.
    Gerdes, J.C.: Decoupled design of robust controllers for nonlinear systems: As motivated by and applied to coordinated throttle and brake control for automated highways. Ph.D. thesis, U.C. Berkeley, March 1996 Google Scholar
  7. 30.
    Gertler, J.J.: Survey of model-based failure detection and isolation in complex plants. IEEE Control Syst. Mag. 8(6), 3–11 (1988) CrossRefGoogle Scholar
  8. 37.
    Hedrick, J.K., Yip, P.P.: Multiple sliding surface control: theory and application. J. Dyn. Syst. Meas. Control 122, 586–593 (2000) CrossRefGoogle Scholar
  9. 43.
    Isermann, R.: Process fault detection based on modeling and estimation methods—a survey. Automatica 20(4), 387–404 (1984) MATHCrossRefGoogle Scholar
  10. 49.
    Johansson, M., Rantzer, A.: Computation of piecewise quadratic Lyapunov functions for hybrid systems. IEEE Trans. Autom. Control 43(4), 555–559 (1998) MathSciNetMATHCrossRefGoogle Scholar
  11. 55.
    Krstić, M., Kanellakopoulous, I., Kokotović, V.P.: Nonlinear and Adaptive Control Design. Wiley, New York (1995) Google Scholar
  12. 58.
    Lygeros, J., Godbole, D., Brouche, M.: A fault tolerant control architecture for automated highway systems. IEEE Trans. Control Syst. Technol. 8(2), 205–219 (2000) CrossRefGoogle Scholar
  13. 59.
    Maciuca, D.B.: Nonlinear robust and adaptive control with application to brake control for automated highway systems. Ph.D. thesis, University of California at Berkeley (1997) Google Scholar
  14. 65.
    Noura, H., Fonte, C., Robert, M.: Fault tolerant control using simultaneous stabilization. In: Proceedings of IEEE International Conference on Systems, Man and Cybernetics, New York, NY, vol. 3, pp. 605–610 (1993) Google Scholar
  15. 66.
    Noura, H., Sauter, D., Hamelin, F., Theilliol, D.: Fault-tolerant control in dynamic systems: application to a winding machine. IEEE Control Syst. Mag. 20(1), 33–49 (2000) CrossRefGoogle Scholar
  16. 89.
    Song, B., Hedrick, J.K., Howell, A.: Fault tolerant control and classification for longitudinal vehicle control. J. Dyn. Syst. Meas. Control 125, 320–329 (2003) CrossRefGoogle Scholar
  17. 92.
    Spooner, J., Passino, K.: Fault-tolerant control for automated highway systems. IEEE Trans. Veh. Technol. 46(3), 770–785 (1997) CrossRefGoogle Scholar
  18. 99.
    Therrien, C.: Decision, Estimation, and Classification. Wiley, New York (1989) MATHGoogle Scholar
  19. 103.
    Vidyasagar, M.: Control System Synthesis: A Factorization Approach. The MIT Press Series in Signal Processing, Optimization, and Control, vol. 7. MIT Press, Cambridge (1985) MATHGoogle Scholar
  20. 106.
    Willsky, A.S.: A survey of design methods for failure detection in dynamic systems. Automatica 12(6), 601–611 (1976) MathSciNetMATHCrossRefGoogle Scholar
  21. 111.
    Yip, P.P., Hedrick, J.K.: Adaptive dynamic surface control: a simplified algorithm for adaptive backstepping control of nonlinear systems. Int. J. Control 71(5), 959–979 (1998) MathSciNetMATHCrossRefGoogle Scholar
  22. 113.
    Zhang, Y., Jiang, J.: Integrated design of reconfigurable fault-tolerant control systems. J. Guid. Control Dyn. 24(1), 133–136 (2001) MathSciNetCrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Limited 2011

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringAjou UniversitySuwonKorea, Republic of (South Korea)
  2. 2.Department of Mechanical EngineeringUniversity of California at BerkeleyBerkeleyUSA

Personalised recommendations