Advertisement

Automation and Control in Manufacturing

  • Wasim Ahmed Khan
  • Abdul  Raouf
  • Kai Cheng
Chapter
Part of the Springer Series in Advanced Manufacturing book series (SSAM)

Abstract

Automation and control is the key element of morden manufacturing machinery. Its scope ranges from data transmission over parallel and serial interfaces as well as over local and wide area networks. Sensors, transducers and actuators are the objects of automation in open and close loop control configuratioin. Several control methodologies (refer to section 3.3.) are in practice in manufacturing sector.

Keywords

Embed System Computer Numerical Control Programmable Logic Controller Programmable Logic Controller Real Time Operating System 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Bibliography

  1. 1.
    Alsafi Y (2008) A deployment of an ontology-based reconfiguration agent for intelligent mechatronic systems. In: IEEE international symposium on industrial electronics, pp 1780–1785Google Scholar
  2. 2.
    Beaudoin J (1989) Simulation system for the control of manufacturing lines. In: Winter simulation conference proceedings, pp 579–583Google Scholar
  3. 3.
    Behalek M (2010) Usage of embedded process functional language as a modeling tool for embedded systems development. In: ISMS, 1st International conference on intelligent systems, modeling and simulation, pp 116–121Google Scholar
  4. 4.
    Bruccoleri M (2005) UML design and AWL programming for reconfigurable control software development of a robotic manipulator. In: IEEE symposium on emerging technologies and factory automation, pp 331–338Google Scholar
  5. 5.
    Cardenas C (2004) Supervisory control of a manufacturing cell; Image processing, biomedicine, multimedia, financial engineering and manufacturing In: Proceedings of the 6th biannual world automation congress, pp 449–454Google Scholar
  6. 6.
    Chung CA (2004) Design and development of an interactive CNC pre-operation training simulator. In: IIE annual conference and exhibition, pp 255–260Google Scholar
  7. 7.
    Crane P (1991) PLC brand standardization, the benefits. Process and Control Engineering, 44(1):22–23Google Scholar
  8. 8.
    Dykstra W (1987) System design specification for manufacturing process PLC controller application. 3rd IEEE Annual programmable control conference and exhibition, hamilton ontario, CanadaGoogle Scholar
  9. 9.
    Fota A (2009) The method of optimization for control of flexible manufacturing systems. In: Proceedings of the 1st international conference on manufacturing engineering, quality and production systems, MEQAPS, pp 358–364Google Scholar
  10. 10.
    Garg DP (2002) Real-time open-platform-based control of cooperating industrial robotic manipulators In: Proceedings of the IEEE international symposium on intelligent control, pp 428–433Google Scholar
  11. 11.
    Ghunjie Z (2009) Development of a PLC virtual machine orienting IEC 61131-3 standard. International conference on measuring technology and mechatronics automation, ICMTMA, pp 374–379Google Scholar
  12. 12.
    Guerra-Zubiaga DA (2010) Mechatronics design methodology applied at manufacturing companies. Int J Manuf Technol Manag 19(3–4):191–210CrossRefGoogle Scholar
  13. 13.
    Henry S (2004) Real time reconfiguration of manufacturing systems. Conference proceedings—IEEE international conference on systems, man and cybernetics, pp 4266–4271Google Scholar
  14. 14.
    Hibino Y, Maruno T (2001) Recent progress on large-scale PLC technologies with advanced functions. NTT Rev 13(5):4–9Google Scholar
  15. 15.
    Horvath L (2006) Virtual space for intelligent engineering in mechatronics. IEEE International Conference on Mechatronics, ICM, pp 248–253Google Scholar
  16. 16.
    Huang S (2009) Mechatronics and control of a long-range nanometer positioning servomechanism. Mechatronics 19(1):14–28CrossRefGoogle Scholar
  17. 17.
  18. 18.
  19. 19.
  20. 20.
  21. 21.
  22. 22.
    Johansson H (2004) A system for information management in simulation of manufacturing processes. Adv Eng Software 35(10–11):725–733CrossRefGoogle Scholar
  23. 23.
    Kao YK (2005) Development of a virtual controller integrating virtual and physical CNC. Mater Sci Forum 505–507:631–636Google Scholar
  24. 24.
    Labib AW (2005) Intelligent real time control of disturbances in manufacturing systems. J Manuf Technol Manag 16(8):864–889CrossRefGoogle Scholar
  25. 25.
    Lambert JM (2004) 3D path planning and real-time simulation for robot manipulators with applications to aerospace manufacturing. In: Proceedings of the ASME design engineering technical conference, pp 1139–1146Google Scholar
  26. 26.
    Landryova L (2006) Process knowledge generation and knowledge management to support product quality in the process industry by supervisory control and data acquisition (SCADA) open systems. Prod Plan Control 17(2):94–98CrossRefGoogle Scholar
  27. 27.
    Lanoz M (2005) Progress in the PLC development during the years 2003-2004. In: IEEE 6th international symposium on electromagnetic compatibility and electromagnetic ecology, pp 4–9Google Scholar
  28. 28.
    Li B (2006) Research and design of embedded reconfigurable mechatronics system based on field bus. In: Proceedings of the 2nd IEEE/ASME international conference on mechatronic and embedded systems and applicationGoogle Scholar
  29. 29.
    Liu Z (2000) The study and realization of SCADA system in manufacturing enterprises. In: Proceedings of the world congress on intelligent control and automation (WCICA), pp 3688–3692Google Scholar
  30. 30.
    Luo Y (2009) CNC grid features modeling employing complex constraints characteristics. In: Proceedings of the international conference on computational intelligence and software engineeringGoogle Scholar
  31. 31.
    Manjunath TC (2005) Design and implementation of a SCADA system using programmable logic controllers. In: Proceedings of the SICE annual conference, pp 1471–1476Google Scholar
  32. 32.
    Park SC (2008) A PLC programming environment based on a virtual plant. Int J Adv Manuf Technol 39(11–12):1262–1270Google Scholar
  33. 33.
    Park HT (2010) Plant model generation for PLC simulation. Int J Prod Res 48(5):1517–1529Google Scholar
  34. 34.
    Pereira CE (2007) Distributed real-time embedded systems: recent advances, future trends and their impact on manufacturing plant control. Annu Rev Controls 31(1):81–92CrossRefGoogle Scholar
  35. 35.
    Perk CM (2006) Development of virtual simulator for visual validation of PLC program. CIMCA: International conference on computational Intelligence for modeling, control and automationGoogle Scholar
  36. 36.
    Rizwan SM (2007) Modelling and optimization of a single-unit PLC system. Int J Model Simul 27(4):361–368Google Scholar
  37. 37.
    Song Z (2010) A model integrated development of embedded software for manufacturing equipment control. Lecture notes in Electrical Engineering, pp 55–61Google Scholar
  38. 38.
    Thapa D (2008) Architecture for modeling, simulation, and execution of plc based manufacturing system. In: Proceedings—winter simulation conference, pp 1794–1801Google Scholar
  39. 39.
    Thramboulidis K (2005) Model-integrated mechatronics—toward a new paradigm in the development of manufacturing systems In: IEEE transactions on industrial informatics, pp 54–61Google Scholar
  40. 40.
    Unger K (2001) The new landscape of manufacturing applications. In: ISA TECH/EXPO technology update conference proceedings, pp 391–400Google Scholar
  41. 41.
    Wang L (2004) Distributed supervisory control and data acquisition (SCADA) software: Issues and state of the art. Autotestcon (Proceedings), pp 332–337Google Scholar
  42. 42.
    Wei R (1998) Modeling and reuse of object-oriented CNC software. Gaojishu Tongxin/High Technology Letters, pp 30–34Google Scholar
  43. 43.
    Whitman SL (2001) Establishing compliance of batch SCADA systems with FDA CGMP 21 CFR Part 11. Pharm Technol, 14–18 + 25Google Scholar
  44. 44.
    Xing B (2008) The application of mechatronic design approach in a reconfigurable manufacturing environment. In: 15th international conference on mechatronics and machine vision in practice, pp 138–143Google Scholar
  45. 45.
    Xu Y (2008) Design of reconfigurable CNC system based on embedded technology. In: Proceedings of the world congress on intelligent control and automation (WCICA), pp 6061–6064Google Scholar
  46. 46.
    Zhang X (2008) Ethernet-based real-time communication and time synchronization of CNC system. Jisuanji Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 14(6):1148–1154Google Scholar

Copyright information

©  Springer-Verlag London Limited 2011

Authors and Affiliations

  1. 1.Centre for Computer StudiesInstitute of Business AdministrationKarachiPakistan
  2. 2.University of Management and TechnologyLahorePakistan
  3. 3.School of Engineering and DesignBrunel University MiddlesexUK

Personalised recommendations