Advertisement

Edible Films and Coatings: Why, What, and How?

  • Attila E. Pavlath
  • William Orts
Chapter

Abstract

Edible films and coatings, such as wax on various fruits, have been used for centuries to prevent loss of moisture and to create a shiny fruit surface for aesthetic purposes. These practices were accepted long before their associated chemistries were understood, and are still carried out in the present day. The term, edible film, has been related to food applications only in the past 50 years. One semi-sarcastic tale was that spies’ instructions were written on edible films, so that in the off-chance they were captured, they could easily destroy their secrets by eating them. In most cases, the terms film and coating are used interchangeably to indicate that the surface of a food is covered by relatively thin layer of material of certain composition. However, a film is occasionally differentiated from a coating by the notion that it is a stand-alone wrapping material, whereas a coating is applied and formed directly on food surface itself. As recently as 1967, edible films had very little commercial use, and were limited mostly to wax layers on fruits. During intervening years, a significant business grew out of this concept (i.e., in 1986, there were little more than ten companies offering such products, while by 1996, numbers grew to 600 companies). Today, edible film use has expanded rapidly for retaining quality of a wide variety of foods, with total annual revenue exceeding $100 million.

Why do we need edible films? Most food consumed comes directly from nature, where many of them can be eaten immediately as we take them from the tree, vine or ground. However, with increased transportation distribution systems, storage needs, and advent of ever larger supermarkets and warehouse stores, foods are not consumed just in the orchard, on the field, in the farmhouse, or close to processing facilities. It takes considerable time for a food product to reach the table of the consumer. During time-consuming steps involved in handling, storage and transportation, products start to dehydrate, deteriorate, and lose appearance, flavor and nutritional value. If no special protection is provided, damage can occur within hours or days, even if this damage is not immediately visible.

Keywords

Water Vapor Permeability Anaerobic Respiration Edible Film Water Migration Food Surface 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Allen L, Nelson AI, Steinberg MP, McGill JN (1963) Edible carbohydrate food coatings II. Evaluation of fresh meat products. Food Technol. 17: 1442–1448Google Scholar
  2. Banker GS (1966) Film coating theory and practice. J. Pharm. Sci. 55: 81–89CrossRefGoogle Scholar
  3. Becker R, Gray GM (1992) Evaluation of a water jet cutting system for slicing potatoes. J. Food Sci. 57(1): 132–137CrossRefGoogle Scholar
  4. Beckwith AC, Wall JS (1966) Reduction and reoxidation of wheat glutenin. Biochim. Biophys. Acta 130: 155–162Google Scholar
  5. Biquet B, Guilbert S (1986) Relative diffusivitives of water in model intermediate moisture foods. Lebensm. Wis. Technol. Food Sci. Technol. 19: 208–214Google Scholar
  6. Biquet B, Labuza TP (1988) Evaluation of moisture permeability characteristics of chocolate films as an edible moisture barrier. J. Food Sci. 53: 989–998CrossRefGoogle Scholar
  7. Bolin HR, Huxsoll CC (1991) Control of minimally processed carrot (Daucus carota) Surface discoloration caused by abrasion peeling. J. Food Sci. 56: 416–418CrossRefGoogle Scholar
  8. Bolin HR, Nury FS, Finkle BJ (1964) An improved process for preservation of fresh peeled apples. Bakers Dig. 38(3): 46–48Google Scholar
  9. Cagri A, Ustonol Z Ryser ET (2004) Review: Antimicrobial edible films and coatings. J. Food Prot. 67(4): 833–848Google Scholar
  10. Cairns JA, Owing CR, Paine FA (1974) Packaging for climate protection. The Institute of Packaging, Newnes-Butterworth, London, EnglandGoogle Scholar
  11. Camirand WM, Forrey RR, Popper K, Boyle FP, Stanley WL (1968) Dehydration of membrane coated foods by osmosis. J. Sci. Food Agric. 19: 472–474CrossRefGoogle Scholar
  12. Camirand WM, Krochta JM, Pavlath AE, Cole ME (1992) Properties of some edible carbohydrate polymer coatings for potential use in osmotic dehydration. Carbohydr polym. 13: 39–49Google Scholar
  13. Chen C, Trezza TA, Wong DWS, Camirand WM, Pavlath AE (1999) Methods of preserving fresh fruits and produce thereof. U.S. Patent. 5, 939, 117Google Scholar
  14. Contreras-Medellin R, Labuza TP (1981) Prediction of moisture protection requirements for foods. Cereal Food World. 26(7): 335–340Google Scholar
  15. Cosler HB (1957) Methods of producing zein coated confectionery. U.S. Patent, 2, 791, 509Google Scholar
  16. Darmadji P, Izumimoto (1994) Effect of chitosan in meat preservation. Meat Sci. 38: 243–254CrossRefGoogle Scholar
  17. Das KP, Kinsella JE (1990) Stability of food emulsions: Physicochemical role of protein and non-protein emulsifiers. Adv. Food Nutr. Res. 34: 81–201CrossRefGoogle Scholar
  18. Davies E (1987) Plant responses to wounding. In the Biochemistry of Plants Vol. 12, D. D. Davies (ed.), P.K. Stumpf. and E.E. Conn (eds-in-chief) Academic, New York, NY, Chapter 7, pp 243–264Google Scholar
  19. Debeaufort F, Martin-Polo M, Voilley A (1993) Polarity, homogeneity and structure affect water vapor permeability of model edible films. J. Food Sci. 58: 426–429, 434CrossRefGoogle Scholar
  20. Debeaufort F, Quezada-Gallo JA, Voilley A (1998) Edible films and coatings: tomorrow’s packaging: A review. Crit. Rev. Food Sci. Nutr. 38: 299–313CrossRefGoogle Scholar
  21. Delong CF, Shepherd TH (1972) Produce coating. U.S. Patent 3, 669, 691Google Scholar
  22. Eaks IL (1980) Effect of chilling on respirations and volatiles of California lemon fruit. J. Amer. Soc. Hort. Sci. 105: 865–869Google Scholar
  23. Eaks IL, Ludi WA (1960) Effects of temperature, washing and waxing on the composition of internal atmosphere of orange fruits. Proc. Am. Soc. Hortic. Sci. 76: 220–228Google Scholar
  24. Feeney RD, Hararalampu SG, Gross A (1992) Method of collating food with edible oil barrier film and product thereof. U.S. Patent 5, 126, 152Google Scholar
  25. Fennema OR (1993) Frozen foods: challenges of the future. Food Aust. 45(8): 374–380Google Scholar
  26. Feuge RO, Vicknair EJ, Lovegren NV (1953) Modification of vegetable oils XIII. Some additional properties of acetostearin products. JAOCS. 30: 283–290CrossRefGoogle Scholar
  27. Fox RC (1958) The relationship of wax crystal structure to water vapor transmission rate of wax films. TAPPI. 41(6): 283–289Google Scholar
  28. Gennadios A Weller CL, Testin RF (1993) Modification of physical and barrier properties of edible wheat gluten-based films. Cereal Chem. 70(4): 426–429Google Scholar
  29. Gennadios A, Hanna MA, Kurth LB (1997) Application of edible coatings on meats, poultry and seafoods: A review. Lebensm. Wiss. Technol. 30: 337–350CrossRefGoogle Scholar
  30. Glicksman M (1982) Functional properties. In Food Hydrocolloids, M. Glicksman, (ed.) CRC, Boca Raton, FL Vol. 1 p. 47Google Scholar
  31. Glicksman M (1983) Red seaweed extracts. In Food Hydrocolloids, M. Glicksman, (ed.) CRC, Boca Raton, FL Vol. 2 p. 73Google Scholar
  32. Gontard N, Guilbert S (1994) Biopackaging technology and properties of edible and/or biodegradable material of agricultural origin. In Food packaging and preservations. M. Mathlouthi, (ed.) Blackie Academic and Professional, Glasgow, pp 159–181Google Scholar
  33. Gontard N, Guilbert S, Cuq JL (1992) Edible wheat gluten films: Influence of the main process variables on film properties using response surface methodology, J. Food Sci. 57: 190–199CrossRefGoogle Scholar
  34. Gontard N, Thibault R, Cuq B, Guilbert S (1996) Influence of relative humidity and film composition on oxygen and carbon dioxide permeabilities of edible films. J. Agric. Food Chem. 44(4): 1064–1068CrossRefGoogle Scholar
  35. Grant GT, Morris ER, Rees DA, Smith PJC, Thom D (1973) Biological interactions between polysaccharides and divalent cations. The eggbox model. FEBS Lett. 32: 195–198CrossRefGoogle Scholar
  36. Greener I (1992) Physical Properties of Edible Films and Their Components. Ph.D. dissertation, University of WisconsinGoogle Scholar
  37. Griesbach H (1987) New insights into ecological role of secondary plant metabolites. Comments Agric. Food Chem. 1: 27–45Google Scholar
  38. Guilbert S (1986) Technology and application of edible protective films, In Food Packaging and Preservation: Theory and Practice, M. Mathlouthi, (ed.) Elsevier Applied Science Publishing Co., London, UK, pp 371–399Google Scholar
  39. Guilbert S (1988) Use of superficial edible layer to protect intermediate moisture foods: Application to the protection of tropical fruits dehydrated by osmosis. In Food Preservation by Moisture Control, C.C. Seaow, (ed.) Elsevier Applied Science Publishers Ltd. Essex, England, pp 199–219Google Scholar
  40. Haard NF, Cody M (1978) Stress metabolites in postharvest fruits and vegetables role of ethylene. In Postharvest Biology and Biotechnology, H.O. Huttin and M. Milner (eds.) Food and Nutrition Press Inc, Westport, CT.Google Scholar
  41. Hagenmaier RD, Baker RA (1997) Edible coatings from morpholine-free wax microemulsions. J. Agric. Food Chem. 45: 349–352CrossRefGoogle Scholar
  42. Hagenmaier RD, Shaw PE (1990) Moisture permeability of edible films made with fatty acid and (hydroxypropyl) methylcellulose. J. Agric. Food Chem. 38: 1799–1803CrossRefGoogle Scholar
  43. Hagenmaier RD, Shaw PE (1991) Permeability of coatings made with emulsified polyethylene wax. J. Agric. Food Chem. 39: 1705–1708CrossRefGoogle Scholar
  44. Hallman GJ, Nisperos-Carriedo MO, Baldwin EA, Campbell CA (1994) Mortality of Carribean fruit fly (Diptera: Tephritidae) immatures in coated fruits. J. Econ. Entomol. 87: 752–757Google Scholar
  45. Hardenburg RE (1967) Wax related coatings for horticultural products. A bibliography. Agricultural Research Service Bulletin 51–15, United States Department of Agriculture, Washington, DCGoogle Scholar
  46. Havard C, Harmony MX (1869) Improved process for preserving meat, fowls, fish etc. U.S. Patent 90, 944Google Scholar
  47. Hershko V, Klein E, Nuvissovitch A (1996) Relationships between edible coating and garlic skin J. Food Sci. 61: 769–777CrossRefGoogle Scholar
  48. Hyodo H, Kuroda H, Yang SF (1978) Induction of phenylalanine ammonia-lyase and increase in phenolics in lettuce leaves in relation to the development of russet spotting caused by ethylene. Plant Physiol. 62: 31–35CrossRefGoogle Scholar
  49. Ismail M (1989) Cold treatment: a successful quarantine method for Florida grapefruit shipped to Japan. Packinghouse Newsletter No. 158: 1–2Google Scholar
  50. Kabara JJ, Ecklund T (1991) Organic acids and esters. In Food Preservatives, N.J. Russell and G.W. Gould (eds.) Blackie and Son, Glasgow, pp 21Google Scholar
  51. Kader AA (1986) Biochemical and physiological basis for effects of controlled and modified atmospheres on fruits and vegetable. Food Technol. 40: 99–104Google Scholar
  52. Kamper SL, Fennema OR (1984) Water vapor permeability of an edible, fatty acid, bilayer film. J. Food Sci. 49: 1482–1485CrossRefGoogle Scholar
  53. Kanig JL, Goodman H (1962) Evaluative procedures for film-forming materials used in pharmaceutical applications. J. Pharm. Sci. 51(1): 77–83CrossRefGoogle Scholar
  54. Katz EE, Labuza TP (1981) Effect of water activity on the sensory crispness and mechanical deformation of snack food products. J. Food Sci. 46: 403CrossRefGoogle Scholar
  55. Kester JJ, Fennema OR (1986) Edible films and coatings: A review. Food Technol. 39: 47Google Scholar
  56. Kester JJ, Fennema OR (1989a) The influence of polymorphic form on oxygen and water vapor transmission through lipid films. JAOCS. 66(8): 1147–1153CrossRefGoogle Scholar
  57. Kester JJ, Fennema OR (1989b) Tempering influence on oxygen nd water vapor transmission through a stearyl alcohol film. JAOCS. 66(8): 1154–1157CrossRefGoogle Scholar
  58. Kester JJ, Fenema OR (1989c) An edible film of lipids and cellulose ether: barrier properties to moisture transmission and structural evaluation. J Food Sci. 54: 1383–1389CrossRefGoogle Scholar
  59. Kester JJ, Bernhardy JJ, Elsen J, Letton J, Fox M (1990) Polyol polyesters as protective moisture barrier for foods. U.S. Patent 4, 960, 600Google Scholar
  60. Koelsch CM, Labuza TP (1992) Functional, physiological and morphological properties of methyl cellulose and fatty acid-based edible barriers. Lebensm Wiss Technol. 25: 404–411Google Scholar
  61. Krochta JM (1992) Control of mass transfer in foods with edible coatings and films. In Advances in Food Engineering, W.E. Speiss and H. Schubert (eds.) Elsevier, Essex, EnglandGoogle Scholar
  62. Krochta JM, Hudson JS, Camirand WM, Pavlath AE (1988) Edible films for light processed fruits and vegetables, Paper Presented at International Winter Meeting of the American Society of Agricultural Engineers, Chicago, ILGoogle Scholar
  63. Krochta JM, Baldwin EA, Nisperos-Carriedo MO (1994) Edible Coatings and Films to Improve Food Quality, Technomic Publ. Co., Lancaster, PA, pp 1–379Google Scholar
  64. Labuza TP (1980) The effect of water activity on reaction kinetics of food deterioration. Food Technol. 34(4): 36–40Google Scholar
  65. Labuza TP (1984) Moisture Sorption: Practical Aspects of Isotherm Measurement and Use American Association of Cereal Chemists, St. Paul, MNGoogle Scholar
  66. LaMer VK, Healy TW, Aylmore LAG (1964) The transport of water through monolayers of long-chain n-paraffinic alcohols. J. Coll. Sci. 19: 673CrossRefGoogle Scholar
  67. Landman W, Lovegren NV, Feuge RD (1960) Permeability of some fat products moisture. JAOCS. 37: 1–4CrossRefGoogle Scholar
  68. Lazarus CR, West RL, Oblinger JJ, Palmer AZ (1976) Evaluation of calcium alginate coating and protective plastic wrapping for the control of lamb carcass shrinkage. J. Food Sci. 41: 639–642CrossRefGoogle Scholar
  69. Mark AM, Roth WB, Mehltretter CL, Rist CE (1966) Oxygen permeability of amylomaize starch films. Food Technol. 20: 75Google Scholar
  70. Mate JI, Saltweil ME, Krochta JM (1996) Peanut and walnut rancidity: effects of oxygen concentration and relative humidity J. Food Sci. 61: 465–472CrossRefGoogle Scholar
  71. Martin-Polo M, Mauguin C, Voilley A (1992) Hydrophobic films and their efficiency against moisture transfer. I. Influence of the film preparation technique. J. Agric. Food Chem. 40: 407–412CrossRefGoogle Scholar
  72. Maxcy RB (1982) Fate of microbial contaminants in lettuce juice. J. Food Protection. 45: 335–339Google Scholar
  73. Mazza G, Qi H (1991) Control after-cooking darkening in potatoes with edible film-forming products and calcium chloride. J. Agric. Food Chem. 39(10): 2163–2166CrossRefGoogle Scholar
  74. McHugh TH, Krochta J (1994) Milk-protein-based edible films and coatings. Food Technol. 48(1): 97–103Google Scholar
  75. Meyers MA (1994) Use of edible films to prolong chewing gum shelf-life. U.S. Patent 5, 286, 502Google Scholar
  76. Morillon V, Debeaufort F, Blond G, Capelle M, Voilley A (2002) Factors affecting the moisture permeability of lipid-based edible films: A review. Critical Reviews in Food Science and Nutrition. 42(1): 67–89CrossRefGoogle Scholar
  77. Murray DG, Luft L (1973) Low D.E. Corn starch hydrolysates. Food Technol. 27(3): 32–39Google Scholar
  78. Nelson K, Fennema OR (1991) Methylcellulose films to prevent lipid migration in confectionery products. J. Food Sci. 56(2): 504–508CrossRefGoogle Scholar
  79. Nippon Shinyuku Co. Ltd. (1984) Fatty acid acylated casein. Japan Kokai Tokyo Koho, Japan Patent 59, 155, 396Google Scholar
  80. Okamoto S (1978) Factors affecting protein film formation. Cereal Foods World. 23: 256–262Google Scholar
  81. Pallos FM, Robertson GH, Pavlath AE, Orts WJ (2006) Thermoformed wheat gluten biopolymers. J. Agric. Food Chem. 54: 349–352CrossRefGoogle Scholar
  82. Park JW, Testin RF, Park HJ, Vergano PJ, Weller CI (1994) Fatty acid concentration effect on tensile strength, elongation and water vapor permeability of laminated edible films. J. Food Sci. 59: 916–919CrossRefGoogle Scholar
  83. Paulinka F (1986) Quality consideration in the selection of confectionery fats. The Manufacturing Confectionerie (May) 75–81Google Scholar
  84. Pavlath AE, Wong DSW, Kumosinski TF (1993) New Coatings for cut fruits and vegetables. CHEMTECH. 23(2): 36–40Google Scholar
  85. Pavlath AE, Wong DSW, Hudson JS, Robertson GH (1996) Edible films for the extension of shelf life of lightly processed agricultural products. ACS Symposium, Series No. 647. G. Fuller, T.A. McKeon and D.D. Bills (eds.) Chapter 8, pp 107–110Google Scholar
  86. Pavlath AE, Gossett C, Camirand W, Robertson GH (1999a) Ionomeric films of alginic acid, J. Food Sci. 64(1): 61–63CrossRefGoogle Scholar
  87. Pavlath AE, Voisin A, Robertson GH (1999b) Pectin-based biodegradable water insoluble films. Macromol. Symp. 140: 106–113CrossRefGoogle Scholar
  88. Pickard JF, Rees JE, Elworthy PH (1972) Water vapour permeability of pored and sprayed polymer films. J. Pharm. Pharmac. 24(Suppl): 39PGoogle Scholar
  89. Platenius H (1939) Wax emulsions for vegetables. Cornell Univ. Agric. Exp. Sta. Bull. 723: 43Google Scholar
  90. Polanski S (1993) Frying food with reduced frying medium uptake – by cooking food to remove water applying coating of swollen dispersion containing natural edible polymer, drying and frying. U.S. Patent 5, 232, 721Google Scholar
  91. Reading S, Spring M (1984) The effects of binder film characteristics on granule and tablet properties. J. Pharm. Pharmacol. 36: 421–426CrossRefGoogle Scholar
  92. Rockland LB, Nishi SK (1980) Influence of water activity on food product quality and stability. Food Technol. 34(4): 42Google Scholar
  93. Rogers CE (1985) Permeation of gases and vapors in polymers. In Polymer Permeability, J. Comyn (ed.) Elsevier Applied Science Publisher, New York, NY, pp 11–73Google Scholar
  94. Roth T, Loncin M (1984) Superficial activity of water. In Engineering and Food. Vol. 1. B.M. McKenna (ed.) Elsevier Applied sciences Publishers, London, England, pp 433Google Scholar
  95. Roth T, Loncin M (1985) Fundamentals of diffusion of water and rate of approach of equilibrium Aw. In Properties of Water in Foods in Relation to Quality and Stability, D. Simatos, JL. Multon (eds.) Martinus Nijhoff Publishing, Dordrecht, The Netherlands, pp. 331Google Scholar
  96. Schofield JD, Bottomley RC, Timms MF, Booth MR (1983) The effect of heat on wheat gluten and the involvement of sulphhydryl-disulphide interchange reactions, J. Cereal Sci. 1: 241–253CrossRefGoogle Scholar
  97. Shaw CP, Secrist JL, Tuomy JM (1980) Method of extending the storage life in the frozen state of precooked foods and products thereof. U.S. Patent 4, 196, 219Google Scholar
  98. Shewfelt RL (1987) Quality of minimally processed fruits and vegetables. J. Food Quality. 10: 143–156CrossRefGoogle Scholar
  99. Talbot G (1994) Minimisation of moisture migration in food systems, Reprint from F.I.E. ParisGoogle Scholar
  100. Tomasul PM, Craig JC Jr., Boswell T (1997) A continuous process for casein production using high-pressure carbon dioxide. J. Food Eng. 33(3): 405–419CrossRefGoogle Scholar
  101. Troller JA (1980) Influences of water activity on microorganisms in foods. Food Technol. 34 (5): 7Google Scholar
  102. Uritani I, Asahi T (1980) Respiration and related metabolic activity in wounded and infected tissues. In Biochemistry of Plants, Vol. 2. PK Stumpf and EE Conn (eds.) Academic, Orlando, FL, Chapter 11, pp 463–485Google Scholar
  103. Williams SK, Oblinger JL, West RL (1978) Evaluation of calcium alginate film for use on beef cuts. J. Food Sci. 43: 292–301CrossRefGoogle Scholar
  104. Wong DWS, Gastineau FA,Gregorski KS, Tillin SJ, Pavlath AE (1992) Chitosan-lipid films: Microstructure and surface energy. J. Agric. Food Chem. 40(4): 540–544CrossRefGoogle Scholar
  105. Wong DWS, Camirand WM, Pavlath AE (1994a) Development of edible coatings for minimally processed fruits and vegetables. In Edible Coatings and films to improve Food Quality, Lancaster, PA., Technomic Publ. Co. Chapter 3, 65–88Google Scholar
  106. Wong DWS, Tillin SJ, Hudson JS, Pavlath AE (1994b) Gas exchange in cut apples with bilayer coatings. J. Agric. Food Chem. 42(10): 2278–2285CrossRefGoogle Scholar
  107. Wong DWS, Gregorski KS, Hudson JS, Pavlath AE (1996) Calcium alginate films: thermal properties and permeability to sorbate and ascorbate. J. Food Sci. 61(2): 337–341CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2009

Authors and Affiliations

  1. 1.Western Regional Research CenterARSUSDAUSA

Personalised recommendations