Coatings for High Temperature Use

  • H. Köstlin


Coatings to be used at high temperatures must be adapted to the special purposes of each application. At high temperatures they have to offer long term stability, must withstand frequent temperature changes and should not be degraded by a subsequent processing step of high temperature. In this contribution high temperature is understood as a value which exceeds standard temperatures of sol-gel processing and utilizes fully the limits of a substrate material, i.e. a range of about 400°C to 1000°C.


Thin Solid Film High Refractive Index Si02 Layer Fuse Silica Substrate Medium Refractive Index 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    D.R. Uhlmann, T. Suratwala, K. Davidson, J.M. Boulton, G. Teowee, Sol-gel derived coatings on glass, J. Non-Crystalline Solids,218, 113 (1997)CrossRefGoogle Scholar
  2. 2.
    J.D. Rancourt, Optical Thin Film Users Handbook, Mc-Graw-Hill, New York (1987)Google Scholar
  3. 3.
    B.D. Fabes, D.P. Birnie, B.J.J. Zelinski, Porosity and composition effects in sol-gel derived interference filters, Thin Solid Films,254, 175 (1995)CrossRefGoogle Scholar
  4. 4.
    S.A. Melpolder, A.W. West, C.L. Barnes, T.N. Blanton, Phase transformation in TiO2/SiO2 sol-gel films as a function of composition and heat-treatment, J. Materials Science,26, 3585 (1991)CrossRefGoogle Scholar
  5. 5.
    X.M. Du, R.M. Almeida, Effects of thermal treatment on the structure and properties of SiO2-TiO2 gel films on silicon substrates, J. Sol-Gel Science and Technology,8, 377 (1997)CrossRefGoogle Scholar
  6. 6.
    D.J. Taylor, D.Z. Dent, D.N. Braski, B.D. Fabes, Boron loss in furnace- and laser-fired sol-gel derived borosilicate glass films, J. Mater. Res.,11, 1870 (1996)CrossRefGoogle Scholar
  7. 7.
    C. Zha, G.R. Atkins, A.F. Masters, Preparation and spectroscopy of anhydrous borosilicate sols and their application to thin films, J. Non-Crystalline Solids,242, 63 (1998)CrossRefGoogle Scholar
  8. 8.
    N. Tohge, T. Minami, Preparation of B2O3-SiO2 and MO-B2O3-SiO2 (M=Zn,Mg) glass films by the sol-gel method, J. Non-Crystalline Solids,112, 432 (1989)CrossRefGoogle Scholar
  9. 9.
    C.W. Nam, S.I. Woo, Characterization of spin-coated silicate and phosphosilicate thin films prepared by the sol-gel method, Thin Solid Films,237, 314 (1994)CrossRefGoogle Scholar
  10. 10.
    S.L. Hietala, D.M. Smith, V.M. Hietala, C.J. Brinker, Closed porosity aluminoslicate for electronic packing applications, J. Mater. Res.,8, 1122 (1993)CrossRefGoogle Scholar
  11. 11.
    M.N. Kamalasanan, S. Chandra, Sol-gel synthesis of ZnO thin films, Thin Solid Films,288, 112(1996)CrossRefGoogle Scholar
  12. 12.
    R. Nass, H. Schmidt, Synthesis of an alumina coating from chelated aluminiumalkoxide, J. Non-Crystalline Solids,121, 329 (1990)CrossRefGoogle Scholar
  13. 13.
    G. Teowee, K.C. McCarthy, F.S. McCarthy, T.J. Bukowski, Preparation and characterization of sol-gel derived Y2O3 thin films, J. Sol-Gel Science and Technology,13, 895 (1998)CrossRefGoogle Scholar
  14. 14.
    L. Brock, G. Frank, B. Vitt, CP 0300579 B1 (1995), US patent 4940636 (1990), assigned to Philips, Optisches InterferenzfilterGoogle Scholar
  15. 15.
    H. Köstlin, G. Frank, G. Hebbinghaus, H. Auding, K. Denissen, Optical filters on linear halogen-lamps prepared by dip-coating, J. Non-Crystalline Solids,218, 347 (1997)CrossRefGoogle Scholar
  16. 16.
    T. Nishide, F. Mizukami, Preparation and properties of TiO2-SiO2 (1:1) films prepared by a complexing agent assisted sol-gel process, Thin Solid Films,298, 89 (1997)CrossRefGoogle Scholar
  17. 17.
    G. Brusatin, M. Guglielmi, A. Martucci, GeO2-based sol-gel films, J. Am. Ceram. Soc.,80, 3139 (1997)CrossRefGoogle Scholar
  18. 18.
    A. Hartridge, M. Ghanashyam Krishna, A.K. Bhattacharya, Spectral transmittance and related properties of ceria-gadolinia thin films, J. Materials Science Letters,17, 1329 (1998)CrossRefGoogle Scholar
  19. 19.
    M. Ohyama, H. Kozuka, T. Yoko, Sol-gel preparation of transparent and conductive aluminium doped zink oxide films with highly preferential crystal orientation, J. Am. Ceram. Soc.,81, 1622(1998)CrossRefGoogle Scholar
  20. 20.
    L. Hu, T. Yoko, H. Kozuka, S. Sakka, Effects of solvent on properties of sol-gel derived TiO2 coating films, Thin Solid Films,219, 18 (1992)CrossRefGoogle Scholar
  21. 21.
    H. Lin, S. Kumon, T. Yoko, Preparation of TiO2 films on self-assembled monolayers by sol-gel method, Thin Solid Films,315, 111 (1998)CrossRefGoogle Scholar
  22. 22.
    A. Kawakatsu, Y. Yuge, N. Hayama, T. Saito, U. Maeda, US patent 4,701,663 (1987), Lamp having interference filmGoogle Scholar
  23. 23.
    Y. Sun, P.A. Sermon, M.S.W. Vong, Design of reflective tantala optical coatings using sol-gel chemistry with ethanolic acid catalyst and chelator, Thin Solid Films,278, 135 (1996)CrossRefGoogle Scholar
  24. 24.
    A. Pawlicka, M. Atik, M.A. Aegerter, Synthesis of multicolor Nb2O5 coatings for electrochromic devices, Thin Solid Films,301, 236 (1997)CrossRefGoogle Scholar
  25. 25.
    J. Koo, S.-U. Kim, D.S. Yoon, K. No, B.-S. Bae, Effect of heat treatment on formation of sol-gel (Pb,La)TiO3 films for optical application, J. Mater. Res.,12, 813 (1997)CrossRefGoogle Scholar
  26. 26.
    N. Takahashi, N. Kakuta, A. Ueno, K. Yamaguchi, T. Fujii, T. Mizushima, Y. Udagawa, Characterization of iron oxide thin films prepared by the sol-gel method, .1. Materials Science,26, 497 (1991)Google Scholar
  27. 27.
    S. Xue, W. Ousi-Benomar, R.A. Lessard, alpha-Fe2O3 thin films prepared by metalorganic deposition (MOD) from Fe(III) 2-ethylhexanoate, Thin Solid Films,250, 194 (1994)CrossRefGoogle Scholar
  28. 28.
    A. Duran, J.M.F. Navarro, P. Casariego, A. Joglar, Optical properties of glass coatings containing Fe and Co, J. Non-Crystalline Solids,82, 391 (1986)CrossRefGoogle Scholar
  29. 29.
    A. Boekooi, H. Köstlin, Deutsches Gebrauchsmuster G 8600642.8, 1986 (Prior. 1985 NL 8500367), assigned to Philips, Gefärbte HalogenglühlampeGoogle Scholar
  30. 30.
    A.K. Atta, P.K. Biswas, D. Ganguli, A sol-gel derived yellow-transmitting coating on glass, J. Non-Crystalline Solids,125, 202 (1990)CrossRefGoogle Scholar
  31. 31.
    B. Orel, F. Svegl, N. Bukovec, M. Kosec, Structural and optical characterization of CuO particulate solid films and the corresponding gels and xerogels, J. Non-Crystalline Solids,159, 49 (1993)CrossRefGoogle Scholar
  32. 32.
    M. Mennig, K. Endres, M. Schmitt, H. Schmidt, Colored coatings on eye glass lenses by noble metal colloids, J. Non-Crystalline Solids,218, 373 (1997)CrossRefGoogle Scholar
  33. 33.
    J.D. Dow, D. Redfield, Toward a unified theory of Urbach’s rule and exponential absorption edge, Phys Rev.,5, 594 (1972)CrossRefGoogle Scholar
  34. 34.
    D.P. Partlow, T.W. O’Keefe, Thirty-seven layer optical filter from polymerized sol-gel solution, Applied Optics,29, 1526 (1990)CrossRefGoogle Scholar
  35. 35.
    A. Eberle, A. Reich, Angle-dependent dip-coating technique (ADDC) an improved method for the production of optical films, J. Non-Crystalline Solids,218, 156 (1997)CrossRefGoogle Scholar
  36. 36.
    D. Ganz, G. Gasparro, J. Otto, A. Reich, N.J. Arfsten, M.A. Aegerter, Fast CO2 laser firing of sol-gel SnO2:Sb coatings, J. Materials Science Letters,16, 1233 (1997)Google Scholar
  37. 37.
    M.A. Aegerter, A. Reich, D. Ganz, G. Gasparro, J. Pütz, T. Krajewski, Comparative study of SnO2:Sb transparent conductive films produced by various coating and heat treatment techniques, J. Non-Crystalline Solids,218, 123 (1997)CrossRefGoogle Scholar
  38. 38.
    D. Ganz, G. Gasparro, M.A. Aegerter, Laser sintering of SnO2:Sb sol-gel coatings, J. Sol-Gel Science and Technology,13, 961 (1998)CrossRefGoogle Scholar
  39. 39.
    S.S. Park, .I.D. Mackenzie, Sol-gel-derived tin oxid thin films, Thin Solid Films,258, 268 (1995)CrossRefGoogle Scholar
  40. 40.
    P. Grosse, F.J. Schmitte, G. Frank, H. Köstlin, Preparation and growth of SnO2 thin films and their optical and electrical properties, Thin Solid Films,90, 309 (1982)CrossRefGoogle Scholar
  41. 41.
    H. Auding, G. Frank, H. Köstlin, B. Vitt, DE 3705639 (1987), EP 0280362 B1 (1988), Dünnschicht-Heizelement, assigned to PhilipsGoogle Scholar
  42. 42.
    G. Frank, H. Köstlin, Electrical properties and defect model of tin-doped indium oxide layers, Appl. Phys. A,27, 197(1982)CrossRefGoogle Scholar
  43. 43.
    Y. Takahashi, S. Okada, R.B.H. Tahar, K. Nakano, T. Ban, Y. Ohya, Dip-coating of ITO films, J. Non-Crystalline Solids,218, 129 (1997)CrossRefGoogle Scholar
  44. 44.
    Y. Djaoued, V.H. Phong, S. Badilescu, P.V. Ashrit, F.E. Girouard, V.V. Truong, Sol-gel prepared ITO films for electrochromic systems, Thin Solid Films,293, 108 (1997)CrossRefGoogle Scholar
  45. 45.
    Y. Ohya, H. Saiki, Y. Takahashi, Preparation of transparent, electrical conducting ZnO film from zinc acetate and alkoxide, J. Materials Science,29, 4099 (1994)CrossRefGoogle Scholar
  46. 46.
    T. Tsuchiya, T. Emoto, T. Sci, Preparation and properties of transparent conductive thin films prepared by the sol-gel process, J. Non-Crystalline Solids,178, 327 (1994)CrossRefGoogle Scholar
  47. 47.
    W. Tang, D.C. Cameron, Aluminium-doped zinc oxide transparent conductors deposited by the sol-gel process, Thin Solid Films,238, 83 (1994)CrossRefGoogle Scholar
  48. 48.
    A. Tsuzuki, H. Murakami, K. Kani, S. Kawakami, Y. Torii, Preparation of Nb-doped TiO2 films by the sol-gel method, J. Materials Science Letters,9, 624 (1990)CrossRefGoogle Scholar
  49. 49.
    H. Lin, S. Kumon, H. Kozuka, T. Yoko, Electrical properties of sol-gel derived transparent titania films doped with ruthenium and tantalum, Thin Solid Films,315, 266 (1998)CrossRefGoogle Scholar
  50. 50.
    B.M. Davis, K.M. Pannel, S. Albright, Diffusion barrier of sol-gel derived silica for sprayed tin oxide film on soda-lime glass, J. Mater. Res.,9, 226 (1994)CrossRefGoogle Scholar
  51. 51.
    A. Matsuda, N. Tohge, T. Minami, Preparation of B2O3-P2O2-SiO2 coating films by sol-gel method, J. Materials Science,27, 4189 (1992)CrossRefGoogle Scholar
  52. 52.
    L. Shaw, R. Abbaschian, A12O3 coatings as diffusion barriers deposited from particulate-containing sol-gel solutions, J. Am. Ceram. Soc.,78, 3376 (1995)CrossRefGoogle Scholar
  53. 53.
    F. Czerwinski, J.A. Szpunar, Optimizing properties of CeO2 sol-gel coatings for protection of metallic substrates against high temperature oxidation, Thin Solid Films,289, 213 (1996)CrossRefGoogle Scholar
  54. 54.
    F. Czerwinski, J.A. Szpunar, The nanocrystalline ceria sol-gel coatings for high temperature applications, J. Sol-Gel Science and Technology,9, 103 (1997)Google Scholar
  55. 55.
    M.J. Bennett, Application and evaluation of ceramic coatings produced by sol-gel technology and vapor deposition procedures, in: Coatings for high temperature applications, ed. E. Lang, Appl. Sci. Publ., London, 169 (1983)Google Scholar
  56. 56.
    K. Miyazawa, K. Suzuki, M.Y. Wey, Microstructiire and oxidation-resistant property of sol-gel-derived ZrO2-Y2O3 films prepared on austenitic stainless steel substrates, J. Am. Ceram. Soc.,78, 347 (1995)CrossRefGoogle Scholar
  57. 57.
    K. Kamiya, N. Mori, J. Matsuoka, H. Nasu, Sol-gel coating of the Cu2O*Al2O2*4SiO2 glassceramics with SiO2 glass films for suppressing abnormal thermal expansion behavior, J. Materials Science Letters,14, 1102 (1995)CrossRefGoogle Scholar
  58. 58.
    M.A. Villegas, M. Aparrcio, A. Duran, Thick sol-gel coatings based on the B2O3-SiO2 system, J. Non-Crystalline Solids,218, 146 (1998)CrossRefGoogle Scholar
  59. 59.
    J. Schlichting, Oxygen transport through glass layers formed by a gel process, J. Non-Crystalline Solids,63, 173 (1984)CrossRefGoogle Scholar
  60. 60.
    H. Köstlin, R. Jost, H. Auding, DP 2648878.8 (1976), US patent 4,127,789 (1978), assigned to Philips, Wärmestrahlen-Sperrfilter in Form einer Filterschicht auf einem transparenten Substrat, vorzugsweise einem Teil des Kolbens einer elektrischen Glühlampe, und Verfahren zu Sciner HerstellungGoogle Scholar
  61. 61.
    C.-W. Hsich, A.S.T. Chiang, C.-C. Lee, S.-J. Yang, Preparation of TiO2-B2O3 coating by sol-gel method, .J. Non-Crystalline Solids,144, 53 (1992)CrossRefGoogle Scholar
  62. 62.
    O. de Sanctis, L. Gomez, N. Pellegri, C. Parodi, A. Marajowsky, A. Duran, Protective glass coatings on metal substrates, J. Non-Crystalline Solids,121, 338 (1990)CrossRefGoogle Scholar
  63. 63.
    R. D. Maggio, L. Fedrizzi, S. Rossi, P. Scardi, Dry and wet corrosion behavior of AISI 304 stainless steel coated by sol-gel ZrO2-CeO2 films, Thin Solid Films,286, 127 (1996)CrossRefGoogle Scholar
  64. 64.
    B.D. Fabes, D.R. Uhlmann, Strengthening of glass by sol-gel coatings, J. Am. Ceram. Soc.,73, 978 (1990)CrossRefGoogle Scholar
  65. 65.
    P.F. James, M. Chen, F.R. Jones, Strengthening of soda-lime-silica glass by sol-gel and melt-derived coatings, J. Non-Crystalline Solids,155, 99 (1993)CrossRefGoogle Scholar
  66. 66.
    RH. Brzesowsky, G. de With, S. van den Cruijsem, U.M. Snijkers-Hendrickx, W.A.M. Wolter, J.G. van Lierop, Glass strengthening by silica particle reinforced organic-inorganic coatings, J. Non-Crystalline Solids,241, 27 (1998)CrossRefGoogle Scholar
  67. 67.
    B.D. Tabes, W.C. Oliver, Mechanical properties of sol-gel coatings, J. Non-Crystalline Solids,121, 348 (1990)CrossRefGoogle Scholar
  68. 68.
    N. Tohge, A. Matsuda, T. Minami, Coating films of 20B2O3*80SiO2 by the sol-gel method, J. Am. Ceram. Soc.,70, C13 (1987)CrossRefGoogle Scholar
  69. 69.
    K.A. Vorotilov, V.A. Vladimir, M.V. Sobolevsky, N.I. Afanasyeva, Structure, properties and applications of phenyl-modified silicate films, Thin Solid Films,288, 57 (1996)CrossRefGoogle Scholar
  70. 70.
    G.A.C.M. Spierings, U.A.M. van Hall, W.C. Keur, Sol-gel lead borate glass films for low-temperature bonding, J. Materials Science Letters,14, 431 (1995)Google Scholar
  71. 71.
    M. Klee, R. Eusemann, R. Waser, W. Brand, H. van Hal, Processing and electrical properties of PbZrxTi1-xO2 (x=0.2–0.75) films: Comparison of metallo-organic decomposition and sol-gel process, J. Appl. Phys.,72, 1566 (1992)CrossRefGoogle Scholar
  72. 72.
    M. Klee, U. Mackens, R. Kiewitt, G. Greuel, C. Metzmacher, Ferroelectric thin films for integrated passive components, Philips J. Res.,51, 363 (1998)Google Scholar
  73. 73.
    M. Klee, U. Mackens, Sol-gel and MOD processing of layered perovskite films, Integrated Ferroelectrics,12, 11 (1996)CrossRefGoogle Scholar
  74. 74.
    S.J. Milne, S.H. Pyke, Modified sol-gel process for the production of lead titanate films, J. Am. Ceram. Soc.,74, 1407 (1991)CrossRefGoogle Scholar
  75. 75.
    C.H. Luk, C.L. Mak, K.H. Wong, Characterization of strontium barium niobate films prepared by sol-gel process using 2-methoxyethanol, Thin Solid Films,298, 57 (1997)CrossRefGoogle Scholar
  76. 76.
    S.I. Jang, U.M. Jang, Structure and electrical properties of boron-added (Ba,Sr)TiO3 thin films fabricated by the sol-gel method, Thin Solid Films,330, 89 (1998)CrossRefGoogle Scholar
  77. 77.
    I. Strawbridge, P.F. James, Thin silica films prepared by dip coating, J. Non-Crystalline Solids,82, 366 (1986)CrossRefGoogle Scholar
  78. 78.
    J.L. Keddie, E.P. Giannelis, Effect of heating rate on the sintering of titanium dioxide thin films: Competition between densification and crystallization, J. Am. Ceram. Soc.,74, 2669 (1991)CrossRefGoogle Scholar
  79. 79.
    J.L. Keddie, P.V. Braun, E.P. Giannelis, Interrelationship between densification, crystallization and chemical evolution in sol-gel titania thin films, J. Am. Ceram. Soc.,77, 1592 (1994)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2004

Authors and Affiliations

  • H. Köstlin

There are no affiliations available

Personalised recommendations