Advertisement

Sapphire pp 363-398 | Cite as

Influence of Chemical–Mechanical Treatment on the Quality of Sapphire Article Working Surfaces and on the Evolution of Surfaces under the Action of Forces

  • Elena R. Dobrovinskaya
  • Leonid A. Lytvynov
  • Valerian Pishchik
Chapter
Part of the Micro- and Opto-Electronic Materials, Structures, and Systems book series (MOEM)

Abstract

Development of a technology for reproducible crystal treatment is a complicated problem. On the one hand, even crystals grown by the same method under identical conditions may differ in quality and properties, and consequently in the requirements of treatment (to say nothing of the crystals obtained by different methods)

Keywords

Mechanical Treatment Boron Carbide Mechanical Polishing Chemical Polishing Sapphire Surface 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Poduraev V.N. Cutting of Hard-to-Machine Materials. Moscow: Higher School Publication, 1974, 587 [in Russian].Google Scholar
  2. 2.
    Rebinder P.A. Physico-Chemical Mechanics. 1958, 75 [in Russian].Google Scholar
  3. 3.
    Caseate, Horio K., Doy K.T. Sensors Mater. MYU 2, 1989, 301.Google Scholar
  4. 4.
    Caseate Lapping and Polishing, Ultraprecision Machining Technology, KumagayaGoogle Scholar
  5. 5.
    Yakovleva T.P., Khodakov G.S. Opt. J. 6, 1994, 32 [in Russian].Google Scholar
  6. 6.
    Fink M. et al. ASLE-ASME Lubricantin Conference. 6, 1956, 65.Google Scholar
  7. 7.
    KubeT. Sci. Mach. 23(11), 1961, 1500 [in Japanese].Google Scholar
  8. 8.
    Sakurai T. J. Jpn. Soc. Lubrication Energy. 11(1), 1966, 26 [in Japanese].Google Scholar
  9. 9.
    Marinescu I. D., Tonshoff H. K., Inasaki I. (eds.). Handbook of Ceramic Grinding and Polishing. Noyes, Park Ridge, NJ; William Andrew, LLC Norwich, New York1998.Google Scholar
  10. 10.
    Guiche H., Moody J. J. Electro Chem. Soc Solid State Sci. Technol. 125, 1978, 136.Google Scholar
  11. 11.
    Ydsumiya N., Imanaka O. Technocrat. 8, 1975, 15–21.Google Scholar
  12. 12.
    Prikhodko V.L., Parfenova A.V., Lomakin A.S. Polishing Composition for Semiconductor Materials Inventor's Certificate No 513413, 1973.Google Scholar
  13. 13.
    Zunzficcht P.J. Polishing Composition for Semiconductor Materials, Pebruafy. 125 1978 299.Google Scholar
  14. 14.
    Alabyev I.V., Pankov V.S., Surovtsev M.V., Chumak V.D. Electron. Ind. 94, 1980, 28–35 [in Russian].Google Scholar
  15. 15.
    Rogov V.V., Ph.D. thesis Finish Precision Treatment Corundum Single Crystals. Moscow. 1992, 71 [in Russian].Google Scholar
  16. 16.
    Karaki T., Vatanabe Dzhundzy.J. Jpn. Soc. Precis. Eng. 48, 1981, 1458–1463.Google Scholar
  17. 17.
    Rogov V.V. et al. Superhard Mater. 5, 2002, 35 [in Russian].Google Scholar
  18. 18.
    Rogov V.V., Rublev N.D., Troyak O.V., Krotenko T.L., A method of finish precision treatment of components from corundum single crystals and polishing tool. Patent of Ukraine 48581 A. 2002.Google Scholar
  19. 19.
    Karaki-Doy T. Sensors Mater. 3, 1988, 153–166.Google Scholar
  20. 20.
    Meri Y., et al. Proceedings of the Third International Conference on Production Energy. 1961, 336.Google Scholar
  21. 21.
    Babiychuk I.P., Dobrovinskaya E.R., Litvinov L.A. et al Phys. Chem. Mater. Treat. [Collected Volume]. 2, 1973, 89–91 [in Russian].Google Scholar
  22. 22.
    Kulikov D.V., Mekalova N.V., Zakirpichnaya M.M. Destruction of Composition Materials. Moscow. 1999, 230 [in Russian].Google Scholar
  23. 23.
    Tatarinkov A.I., Episherlova K.L., Rusak T.F., Gridnev V.I. Methods of Control of Damaged Layers during Mechanical Treatment of Single Crystals. Moscow: Energiya, 1978, 63 [in Russian].Google Scholar
  24. 24.
    Gurevich D.M., Deryugin Yu V., Dobrovinskaya E.R. et al Corundum Single Crystals in Jewelry Industry. Leningrad: Mashinostroenie, 1984, 150 [in Russian].Google Scholar
  25. 25.
    Torchuk N.M., Gridneva I.V., Dobrovinskaya E.R., Tsaiger A.M. Phys. Chem. Mater. Treat [Collected Volume]. 1984, 54–55 [in Russian].Google Scholar
  26. 26.
    Chaikovskiy E.F., Kostenko A.B., Rozenberg Kh G., et al Single Cryst. Mater. [Collected Volume]. 11, 1983, 123 [in Russian].Google Scholar
  27. 27.
    Kostenko A.B., Puzikov V.M., Rozenberg Kh G., Semenov A.V. Abstracts of All-Union Conference “New Potentialities of Diffraction, X-Ray and Electron”, Moscow. 1987, 49 [in Russian].Google Scholar
  28. 28.
    Milman Yu, V., Lotsko D.V., X11 International plansee seminar, Austria. 1, 1989, 281–300.Google Scholar
  29. 29.
    Funkenbusch P.D., Takahashi T. SPIE. 3134, 1997, 293.CrossRefGoogle Scholar
  30. 30.
    Preston J. Soc. Glass Technol. 11, 1927, 214–256.Google Scholar
  31. 31.
    Evans A., Marshall D. Fundamentals of Friction and Wear of Materials Ed. by D.A. Rignay. Washington: ASM. 1981, 439–452.Google Scholar
  32. 32.
    Voloshin A.V., Livinov L.A. Funct. Mater. 9(3), 2002, 555 (7, 333).Google Scholar
  33. 33.
    Babiychuk I.P., Dobrovinskaya E.R., Chukaev V.I. Chem. Eng. Treat. Methods Manuf. Prod. 1, 1971, 177–194 [in Russian].Google Scholar
  34. 34.
    Babiychuk I.P., Dobrovinskaya E.R., Litvinov L.A. Phys. Chem. Mater. Treat. Called. 2. 1973. 89–91 [in Russian].Google Scholar
  35. 35.
    Babiychuk I.P., Dobrovinskaya E.R., Litvinov L.A., Chukaev V.I. Single Cryst. Eng. [Collected Volume]. 5, 1971, 124–130 [in Russian].Google Scholar
  36. 36.
    Babiychuk I.P., Dobrovinskaya E.R., Litvinov L.A., Chukaev V.I. Single Cryst. Eng. [Collected Volume]. 4, 1971, 191–197 [in Russian].Google Scholar
  37. 37.
    Back D., Polvani R., Braun L. et al SPIE. 3060, 1997, 102.CrossRefGoogle Scholar
  38. 38.
    Anikin A.V., Litvinov Yu M, Raskin A.A., Moscow. 2005, 447-450 [in Russian].Google Scholar
  39. 39.
    Smith M. Schmid Khattak P. SPIE. 3705, 1999, 85.CrossRefGoogle Scholar
  40. 40.
    Babiychuk I.P., Dobrovinskaya E.R., Komilich O.N., Litvinov L.A., A Treatment Method for Single Crystals, Inventor's certificate 1042968 (USSR). 1983 [in Russian]Google Scholar
  41. 41.
    Gridneva I.V., Milman Yu V., Trefilov V.I. et al Phys. Stat. Sol. A 54, 1979, 195–206.CrossRefGoogle Scholar
  42. 42.
    Trefilov V.I., Milman Yu V., Firstov S.A. Physical Foundations of Hardness of High-Melting Metals. Kiev: Naukova dumka, 1975, 315pp [in Russian].Google Scholar
  43. 43.
    Wachtman J.D., Maxwell L.H. Am. Ceram. Soc. 40, 1957, 377–385.CrossRefGoogle Scholar
  44. 44.
    Belaya A.N., Dobrovinskaya E.R., Litvinov L.A., Tsaiger A.M. Phys. Chem. Mater. Treat. 1, 1984, 128–131 [in Russian].Google Scholar
  45. 45.
    Evans A.G., Charles E.A. J. Am. Ceram. Soc. 59, 1976, 371.CrossRefGoogle Scholar
  46. 46.
    Dobrovinskaya E.R., Pishchik V.V. Corundum Single Crystals: Problems of Obtaining and Quality. Moscow: NIITEKhim. 1988, 74pp.; Part 11. 62pp [in Russian].Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2009

Authors and Affiliations

  • Elena R. Dobrovinskaya
    • 1
  • Leonid A. Lytvynov
    • 2
  • Valerian Pishchik
    • 3
  1. 1.Rubicon TechnologyFranklin ParkUSA
  2. 2.Scientific Technological ComplexInstitute for Single CrystalsKharkovUkraine
  3. 3.Gavish, Ltd.Sapphire ProductsOmerIsrael

Personalised recommendations