Advertisement

Oxidation Behavior of the Feedstock

  • Frank Czerwinski

An extremely high affinity of magnesium to oxygen, along with the highly developed surface area of magnesium alloy chips, used as a feedstock during injection molding, makes the system prone to oxidation. It is anticipated that alloy protection inside the machine barrel by an inert atmosphere of argon is essentially better than molten surface shielding by SF6 gas during die casting. So far there is a lack of experimental verification, and existing data send a rather unclear message. First, the inertness of an argon atmosphere is sensitive to small amounts of entrapped air, and the growth rate of MgO on Al-based alloy at temperatures of 450 °C to 800 °C in a mixture of Ar+1%O2 and Ar+5%O2 equals 25% and 70%, respectively, of the oxidation rate in air [1]. Second, the final oxygen content in molded parts is still about one order of magnitude higher than that present in an initial feedstock [2]. A description of the alloy oxidation behavior is therefore of key importance for designing material feeding and Ar flow systems. It is also important for feedstock manufacturing in terms of morphology and its chemical modification against oxidation. In particular, it is helpful in verifying the necessity of beryllium additions routinely used in conventionally cast alloys.

Keywords

Magnesium Alloy Injection Molding Ignition Temperature AZ91D Alloy AZ91D Magnesium Alloy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Tenorio JAS, Espinosa DCR (2000) High temperature oxidation of Al-Mg alloys. Oxidation of Metals 53(3–4):361–373CrossRefGoogle Scholar
  2. 2.
    Walukas DM, Decker RF, Totten AW (2001) Effects of beryllium content in Thixomolding AZ91D. In J.N. Hryn (ed) Magnesium Technology 2001. TMS, New Orleans, LA, pp 95–98Google Scholar
  3. 3.
    Cohen MS (1960) Acta Metallurgica 8:356CrossRefGoogle Scholar
  4. 4.
    Pilling NB, Bedworth RE (1923) Journal of Institute of Metals 28:534Google Scholar
  5. 5.
    Czerwinski F (1998) The microstructure and internal stress of Fe-Ni nanocrystalline alloys deposited without a stress reliever. Electrochemica Acta 44:667–675CrossRefGoogle Scholar
  6. 6.
    Klug HP, Alexander LE (1974) X-ray diffraction procedures, John Wiley, New YorkGoogle Scholar
  7. 7.
    Czerwinski F (2000) On the use of the micro-marker technique for studying the growth mechanism of thin oxide films. Acta Materialia 48:721–733CrossRefGoogle Scholar
  8. 8.
    Czerwinski F, Smeltzer WW (1993) The early-stage oxidation kinetics of CeO2 sol-coated nickel. Journal of the Electrochemical Society 140(9):2606–2615CrossRefGoogle Scholar
  9. 9.
    Smeltzer WW (1958) Oxidation of an aluminum 3pct magnesium alloy in the temperature range 200–250 °C. Journal of the Electrochemical Society 105:67–71CrossRefGoogle Scholar
  10. 10.
    Scamans GM, Butler EP (1975) In situ observations of crystalline oxide formation during aluminum and aluminum alloy oxidation. Metallurgical Transactions A 6:2055–2063CrossRefGoogle Scholar
  11. 11.
    Czerwinski F, Szpunar JA (1998) The influence of the crystallographic orientation of nickel surface on oxidation inhibition by ceria coatings. Acta Materialia 46:1403–1417CrossRefGoogle Scholar
  12. 12.
    Lea C, Molinari C (1984) Magnesium diffusion, surface segregation and oxidation in Al-Mg alloys. Journal of Materials Science 19:2336–2352CrossRefGoogle Scholar
  13. 13.
    Czerwinski F (2003) The early stage oxidation and evaporation of Mg-9%Al-1%Zn alloy. Corrosion Science 46:377–386CrossRefGoogle Scholar
  14. 14.
    Jedlinski J, Borchardt G (1991) Oxidation of Metals 36:317CrossRefGoogle Scholar
  15. 15.
    Leontis TE, Rhines FN (1946) Rates of high-temperature oxidation of magnesium and magnesium alloys. Transactions of American Institute of Mining and Metallurgical Engineers 166:265–294Google Scholar
  16. 16.
    Gulbransen EA (1945) The oxidation and evaporation of magnesium at temperatures from 400 to 500 °C. Transactions of the Electrochemical Society 87:589–599CrossRefGoogle Scholar
  17. 17.
    Zayan MH (1990) Model for non-protective oxidation of Al-Mg alloys. Oxidation of Metals 34:465–472CrossRefGoogle Scholar
  18. 18.
    Song G, Atrens A, Dargusch M (1999) Corrosion Science 41:249CrossRefGoogle Scholar
  19. 19.
    Hine RA, Guminski RD (1960) Journal of Institute of Metals 89:417Google Scholar
  20. 20.
    Reimers HA (1934) Method for inhibiting the oxidation of readily oxidizable metals. US Patent 1,972,317, 4 Sept 1934Google Scholar
  21. 21.
    Hanavalt JD (1972) Practical protective atmospheres for molten magnesium. Metal Engineering Quarterly 12(4)Google Scholar
  22. 22.
    Cashion SP, Rickettes NJ, Hayes PC (2002) Characterization of protective surface films formed on molten magnesium protected by air SF6 atmospheres. Journal of Light Metals 2:37–42CrossRefGoogle Scholar
  23. 23.
    Cashion SP, Rickettes NJ, Hayes PC (2002) The mechanism of protection of molten magnesium by cover gas mixtures containing sulphur haxafluoride. Journal of Light Metals 2:43–47CrossRefGoogle Scholar
  24. 24.
    Milbrath DS (2002) Fluorinated ketones as a new cover gas for protection of molten magnesium: A progress report. In 59th Annual World Magnesium Conference, Montreal, Canada, IMA, pp 66–71Google Scholar
  25. 25.
    Rickettes NJ, Cashion SP (2001) Hydro-fluorocarbons as a replacement for sulphur hexafluoride in magnesium processing. In JN Hryn (ed) Magnesium Technology 2001, pp 31–36Google Scholar
  26. 26.
    Bach FW et al (2005) Use of CO2-snow for protecting molten magnesium from oxidation. In NR Neelameggham, HI Kaplan, BR Powell (eds) Magnesium Technology 2005, TMS, pp 3–6Google Scholar
  27. 27.
    Peschaux M, Rhodon M (2002) Method for protecting a non-ferrous liquid metal from oxidation. US Patent 6,500,230, 31 Dec 2002Google Scholar
  28. 28.
    Stratton PF, Chang EK (2000) Protective atmospheres for the heat treatment of magnesium alloys. In HI Kaplan, JN Hryn (eds) Magnesium Technology 2000, pp 71–75Google Scholar
  29. 29.
    Czerwinski F (2002) The oxidation behaviour of an AZ91D magnesium alloy at high temperatures. Acta Materialia 50:2639–2654CrossRefGoogle Scholar

Copyright information

© Springer 2008

Authors and Affiliations

  • Frank Czerwinski
    • 1
  1. 1.Development EngineeringHusky Injection Molding Systems Ltd.Bolton, OntarioCanada

Personalised recommendations