Advertisement

Pyrolyzability of Preceramic Polymers

  • Yi Pang
  • Ke Feng
  • Yitbarek H. Mariam

Keywords

Ceramic Fiber Pyrolysis Condition Silicon Carbonitride Ceramic Yield PRECERAMIC Polymer 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    (a) K. J. Wynne and R. W. Rice, Annu. Rev. Mater. Sci. 14, 297 (1984); (b) M. Birot, J.-P. Pillot, and J. Dunogues, Chem. Rev. 95, 1443 (1995); (c) A. R. Bunsell and M.-H. Berger, J. Eur. Ceram. Soc. 20,2249 (2000).Google Scholar
  2. 2.
    (a) D. L. Segal, Br. Ceram. Trans. J. 85, 184 (1986); (b) K. Komeya, Am. Ceram. Soc. Bull. 63, 1158 (1984); (c) N. N. Ault and S. D. Hartline, Am. Ceram. Soc. Bull. 5, 773 (1987); (d) S. B. Hanna, N. A. L. Mansour, A. S. Tails, and H. M. A. Abd-allah, Br. Ceram. Trans. J. 84, 18 (1985).Google Scholar
  3. 3.
    S. Yajima, K. Okamura, J. Hayashi, and M. Omori, J. Am. Ceram. Soc. 59, 324 (1976).Google Scholar
  4. 4.
    J. P. Riggs, Encycl. Polym. Sci. Eng. 2, 640 (1988)Google Scholar
  5. 5.
    R. A. Sinclair, in Ultrastructure Processing of Ceramics, Glasses and Composites, edited by L. L. Hench and D. R. Ulrich (Wiley-Inter- science, New York, 1984), p. 256.Google Scholar
  6. 6.
    (a) R. W. Rice, Am. Ceram. Soc. Bull. 62, 889 (1983); (b) B. E. Walker, Jr., R. W. Rice, P.F. Becker, B. A. Bender, and W. S. Coblenz, Am. Ceram. Soc. Bull. 62, 619 (1983); (c) R. Baney and G. Chandra, in Concise Encyclopedia of Polymer Science and Engin- eering, edited by J. I. Kroschwitz and P. M. Siegel (Wiley- Interscience, New York, 1990), p. 899; (c) D. Segal, Chemical Syn- thesis of Advanced Ceramic Materials (Cambridge University Press, New York, 1989).Google Scholar
  7. 7.
    For an overview see: (a) D. Seyferth, Adv. Chem. Ser. 245, 131 (1995); (b) R. M. Laine and A. Sellinger, Si-containing ceramic precursors. In The Chemistry of Organic Silicon Compounds, vol. 2, chapter 39, edited by Z. Rappoport and Y. Apeloig (John Wiley & Sons Ltd., 1996), pp. 2245-2315; (c) J. Livage, C. Sanchez and F. Babonneau, Molecular precursor routes to inorganic solid. In Chemistry of Advanced Materials: An Overview, chapter 9, edited by L. V. Interrante and M. J. Hampden-Smith (Wiley-VCH, 1998), pp. 389-448; (d) R. Richter, G. Roewer, U. Bohme, K. Busch, F. Babonneau, H. P. Martin, and E. Muller, Appl. Organomet. Chem. 11, 71 (1997).Google Scholar
  8. 8.
    G. Pouskouleli, Ceram. Int. 15, 213 (1989).Google Scholar
  9. 9.
    G. D. Soraru, F. Babonneau, and J. D. Mackenzie, J. Non-Cryst. Solids 106, 256 (1988).Google Scholar
  10. 10.
    (a) C. H. Anderson and R. Warren, Composites 15, 16 (1984); (b) C. H. Anderson and R. Warren, Composites. 15, 101 (1984).Google Scholar
  11. 11.
    (a) A. Zangvil, Y-W. Chang, N. Finnegan, and J. Lipowitz, Ceram. Int. 18, 271 (1992); (b) A. Kato, H. Mizumoto, and Y. Fukushige, Ceram. Int. 10, 37 (1984).Google Scholar
  12. 12.
    (a) O. Devverdier, M. Monthioux, D. Mocaer, and R. Pallier, J. Eur. Ceram. Soc. 12, 27 (1993); (b) B. Kanner and R. E. King III, in Silicon-Based Polymer Science: A Comprehensive Resource, edited by J. M. Zeigler and F. W. G. Fearon (American Chemical Society, Washington, D.C. 1990), p. 607; (c) G. S. Bibbo, P. M. Benson, and C. G. Pantano, J. Mater. Sci. 26, 5075 (1991).Google Scholar
  13. 13.
    K. Okamura, H. Ichikawa, M. Takeda, T. Sefachi, N. Kaoai, and M. Nishii, U.S. Patent No. 5,283,044 (February 1, 1994). 14. R. M. Laine and F. Babonneau, Chem. Mater. 5, 260 (1993).Google Scholar
  14. 15.
    D. Seyferth, C. Strohmann, H. J. Tracy, and J. L. Robinson, Mater. Res. Soc. Symp. Proc. 249, 3 (1992).Google Scholar
  15. 16.
    R. M. Laine, Y. D. Blum, R. D. Hamlin, and A. Chow, National Technology Information Service Technical Report No. 5, Order No. AD-A178136, 1987.Google Scholar
  16. 17.
    M. C. Parche, in Kirk-Othmer Encyclopedia of Chemical Technol- ogy, vol. 4, edited by H. F. Mark, J. J. Meketta, Jr., and D. F. Othmer, 2nd edition (Interscience, John Wiley, New York, 1964), pp. 114-132.Google Scholar
  17. 18.
    (a) A.R. Verma and P. Krishna, in Polymorphism and Polytypism in Crystals (Wiley, New York, 1966); (b) Gmelin Handbook of Inor-ganic Chemistry, 8th ed., edited by J. Schlichting, G. Czack, E. Koch-Bienemann, P. Kuhn, and F. Schroder (Springer, New York, 1984), Suppl. vol. B2, Si-Silicon; (c) P. T. B. Shaffer, Acta Crystallogr. B 25, 477 (1969).Google Scholar
  18. 19.
    (a) R. Marchand, Y. Laurent, and J. Lang, Acta Crystallogr. B 25, 2157 (1969); (b) K. Kato, Z. Inoue, K. Kijima, and J. Kawada, J. Am. Ceram. Soc. 58, 90 (1975); (c) R. Gran, Acta Crystallogr. B 35, 800 (1979).Google Scholar
  19. 20.
    (a) Silicon Carbide-1973, edited by R. C. Marshall, J. W. Faust, Jr., and C. E. Ryan (University of South Carolina Press, Columbia, 1974); (b) Silicon Carbide Ceramics, edited by S. Somiya and Y. Inomata (Elsevier Applied Science, London, 1991).Google Scholar
  20. 21.
    (a) G. R. Terwillinger, J. Am. Chem. Soc. 57,48(1974); (b) T. Ekstrom, Mater. Forum 17(1), 62 (1993); (c) R. N. Katz, Ind. Ceram. 17(3), 158 (1997).Google Scholar
  21. 22.
    R. West, J. Organomet. Chem. 300, 327 (1986).Google Scholar
  22. 23.
    (a) R. Baney and G. Chandra, in Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, N. M. Bikales, C. G. Over-berger, G. Menges, and J. I. Kroschwitz (Wiley-Interscience, New York, 1988), Vol. 13, p. 312, and references therein; (b) P. Trefonas, in Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark, N. M. Bikales, C. G. Overberger, G. Menges, and J. I. Krosch-witz (Wiley-Interscience, New York, 1988), vol. 13, p. 162.Google Scholar
  23. 24.
    R. R. Wills, R. A. Markle, and S. P. Mukherjee, Am. Ceram. Soc. Bull. 62, 904 (1983).Google Scholar
  24. 25.
    R. D. Miller and J. Michl, Chem. Rev. 89, 1359 (1989).Google Scholar
  25. 26.
    Z. F. Zhang, Y. Mu, F. Babonneau, R. M. Laine, J. E. Harrod, and J. A. Rahn, in Inorganic and Organometallic Oligomers and Polymers, edited by J. F. Harrod and R. M. Laine (Kluwer Academic, Boston, 1991), p. 127.Google Scholar
  26. 27.
    H. R. Allcock, in Chemical Processing of Advanced Materials, edited by L. L. Hench and J. K. West (Wiley, New York, 1992), p. 699. 28. G. Soula, in Inorganic and Organometallic Polymers with Special Properties, edited by R. M. Laine (Kluwer Academic, Boston, 1992), p. 31.Google Scholar
  27. 29.
    R. West, in Inorganic Polymers, edited by J. E. Mark, H. R. Allcock, and R. West (Prentice Hall, Englewood Cliffs, NJ, 1992), p. 186. 30. R. Richter, G. Roewer, K. Leo, and B. Thomas, Frieberg. Fors- chungsh. A. A 832, 99 (1993).Google Scholar
  28. 31.
    (a) Silicon-Based Polymer Science: A Comprehensive Resource, edi- ted by J. M. Zeigler and F. W. G. Fearon (American Chemical Society, Washington, D.C., 1990), Chaps. 31-34; (b) P. Kochs In Silicon in Polymer Synthesis, edited by H. R. Kricheldorf (Springer, Berlin 1996), pp.223-287.Google Scholar
  29. 32.
    T. Yamamura, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25,8 (1984).Google Scholar
  30. 33.
    F. Babonneau, J. Livage, G. D. Soraru, G. Carturan, and J. D. Mack- enzie, New J. Chem. 14, 539 (1990).Google Scholar
  31. 34.
    S. Yajima, J. Hayashi, M. Omori, and K. Okamura, Nature 261, 683 (1976).Google Scholar
  32. 35.
    R. West, L Nozue, X.-H. Zhang, and P. Trefonas, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25, 4 (1984).Google Scholar
  33. 36.
    R. West, L. D. David, P. I. Djurovich, H. Yu, and R. Sinclair, Am. Ceram. Soc. Bull. 62, 899 (1983).Google Scholar
  34. 37.
    R. West, L. D. David, P. L. Djurovich, K. L. Stearley, K. S. V. Srinivasan, and H. Yu, J. Am. Chem. Soc. 103, 7352 (1981).Google Scholar
  35. 38.
    R. Riedel, K. Strecker, and G. Petzow, J. Am. Chem. Soc. 72, 2071 (1989).Google Scholar
  36. 39.
    D. J. Carlsson, J. D. Cooney, S. Gauthier, and D. J. Worsfold, J. Am. Ceram. Soc. 73, 237 (1990).Google Scholar
  37. 40.
    F. Duboudin, M. Birot, O. Babot, J. Dunogues, and R. Galas, J. Organomet. Chem. 341, 125 (1988).Google Scholar
  38. 41.
    M. A. Abu-eid, R. B. King, and A. M. Kotliar, Eur. Polym. J. 28, 315 (1992).Google Scholar
  39. 42.
    B. I. Lee and L. L. Hench, in Science of Ceramic Chemical Process- ing, edited by L. L. Hench and D. R. Ulrich (Wiley, New York, 1986), p. 345.Google Scholar
  40. 43.
    B. L Lee and L. L. Hench, Mater. Res. Soc. Symp. Proc. 73, 815 (1986).Google Scholar
  41. 44.
    T. Ishikawa, M. Shibuya, and T. Yamamura, J. Mater. Sci. 25, 2809 (1990).Google Scholar
  42. 45.
    (a) S. Yajima, Y. Hasegawa, K. Okamura, and T. Matsuzawa, Nature, 273,525 (1978); (b) S. Yajima, Philos. Trans. R. Soc. London Ser. A. 294, 419 (1980).Google Scholar
  43. 46.
    W. Toreki, C. D. Batich, M. D. Sacks, M. Salaam, and G. J. Choi, Mater. Res. Soc. Symp. Proc. 271, 761 (1992).Google Scholar
  44. 47.
    S. Yajima, K. Okamura, J. Hayashi, and M. Omori, J. Am. Ceram. Soc. 59, 324 (1976).Google Scholar
  45. 48.
    (a) Y. Hasegawa, M. Iimura, and S. Yajima, J. Mater. Sci. 15, 720 (1980); (b) S. Yajima, Y. Hasegawa, J. Hayashi, and M. Kimura, J. Mater. Sci. 13, 2569 (1978); (c) Y. Hasegawa and K. Okamura, J. Mater. Sci. 21, 321 (1986); (d) H. Ichikawa, F. Machino, S. Mitsuno, T. Ishikawa, K. Okamura, and Y. Hasegawa, J. Mater. Sci. 21,4352 (1986); (e) Y. Hasegawa, J. Mater. Sci. 24, 1177 (1989).Google Scholar
  46. 49.
    R. J. P. Corriu, D. Leclercq, P. H. Mutin, and A. Vioux, Chem. Mater. 4,711 (1992).Google Scholar
  47. 50.
    (a) P. H. Hommel, J. L. Miquel, and A. P. Legrand, Industrie Cer- amique 849, 344 (1990); (b) M. Takeda, J.-I. Sakamoto, Y. Imai, and H. Ichikawa, Compos. Sci. Technol. 59, 813 (1999).Google Scholar
  48. 51.
    (a) R. A. Petrisko and G. L. Stark, 33rd International SAMPE (The Society for the Advancement of Materials Process Engineering) Symposium, edited by G. Carrillo, E. D. Newell, W. D. Brown, and P. Phelan, Anaheim, CA, March 7-10, 1988; (b) K. Okamura, M. Sato, T. Matsuzawa, and Y. Hasegawa, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25, 6 (1984); (c) T. Taki, S. Maeda, K. Okamura, M. Sato, and T. Mutsuzawa, J. Mater. Sci. Lett. 6, 826 (1987); (d) T. Mah, N. L. Hecht, D. E. McCullum, J. R. Hoenigman, H. M. Kim, A. P. Katz, and H. A. Lipsitt, J. Mater. Sci. 19, 1191 (1984); (e) C. Laffon et al., J. Mater. Sci. 24, 1503 (1989).Google Scholar
  49. 52.
    (a) R. H. Baney and J. H. Gaul, Jr., U.S. Patent No. 4,310,651 (January 12, 1982); (b) D. Reyx, J. M. N. Martins, and I. Campistron, Makromol. Chem. 194, 87 (1993); (c) R. D. Miller, Polym. News 12, 326 (1987); (d) R. West, in Ultrastructure Processing of Ceramics, Glasses and Composites, edited by L. L. Hench and D. R. Ulrich (Wiley-Interscience, New York, 1984), p. 235; (e) F. Yenca, Y. L. Chen, and K. Matyjaszewski, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 28, 222 (1987); (f) S. M. Bushnell-Watson and J. H. Sharp, J. Therm. Anal. 40, 189 (1993).Google Scholar
  50. 53.
    W. R. Schmidt, L. V. Interrante, R. H. Doremus, T. K. Trout, P. S. Marchetti, and G. E. Maciel, Chem. Mater. 3, 257 (1991). 54. C. L. Schilling, Jr., U.S. Patent No. 4,783,516 (November 8, 1988).Google Scholar
  51. 55.
    (a) Z. F. Zhang, F. Babonneau, R. M. Laine, Y. Mu, J. P. Harrod, and J. A. Rahn, J. Am. Ceram. Soc. 74, 670 (1991); (b) M. F. Gozzi, M. D. C. Goncalves, and I. V. P. Yoshida, J. Mater. Sci. 34, 155 (1999); (c) B. Boury, N. Bryson and G. Soula, Appl. Organomet. Chem. 13, 419 (1999).Google Scholar
  52. 56.
    (a) D. Seyferth, T. G. Wood, H. J. Tracy, and J. L. Robison, J. Am. Ceram. Soc. 75, 1300 (1992); (b) M. F. Gozzi and I. V. P. Yoshida, Macromolecules 28, 7235 (1995); (c) B. Boury, N. Bryson, and G. Soula, Chem. Mater. 10, 297 (1998).Google Scholar
  53. 57.
    J. Lipowitz, G. E. LeGrow, T. F. Lim, and N. Langley, Ceram. Eng. Sci. Proc. 9, 931 (1988).Google Scholar
  54. 58.
    (a) S. Yajima, J. Hayashi, and M. Omori, Chem. Lett. September (9), 931 (1975); (b) S. Yajima, K. Okamura, and J. Hayashi, Chem. December (12), 1209 (1975); (c) S. Yajima, M. Mori, J. Hayashi and K. Okamura, Lett. June (6), 551 (1976). PYROLYZABILITY OF PRECERAMIC POLYMERS/1003Google Scholar
  55. 59.
    J. G. Noltes, in Transformation of Organometallics into Common and Exotic Materials: Design and Activation, edited by R. M. Laine, (Martinus Nijhoff, Amsterdam, 1988), p. 97.Google Scholar
  56. 60.
    D. R. Bujalski, G. E. LeGrow, and T. F. Lim, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 28, 396 (1987).Google Scholar
  57. 61.
    T. M. Hsu and S. P. Sawan, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 33, 1034 (1992).Google Scholar
  58. 62.
    (a) Y. T. Shieh, S. P. Sawan, and J. B. Milstein, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 33, 1044 (1992); (b) Y. T. Shieh and S. P. Sawan, J. Polym. Res. 1(4), 367 (1994); (c) Y. T. Shieh and S. P. Sawan, J. Appl. Polym. Sci. 58, 2013 (1995).Google Scholar
  59. 63.
    Y. T. Shieh and S. P. Sawan, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 31, 1042 (1992).Google Scholar
  60. 64.
    (a) K. Kumar, J. Polym. Sci. C 26, 25 (1988); (b) F. I. Hurwitz, T. A. Kacik, X.-Y. Bu, J. Masnovi, P. J. Heimann, and K. Beyene, J. Mater. Sci. 30, 3130 (1995).Google Scholar
  61. 65.
    (a) E. Bacque, J. P. Pillot, M. Birot, and J. Dunogues, Macromol- ecules 21, 30 (1988); (b) 21, 34 (1988).Google Scholar
  62. 66.
    E. Bacque, J. P. Pillot, M. Birot, and J. Dunogues, in Transformation of Organometallics into Common and Exotic Materials: Design and Activation, edited by R. M. Laine, (Martinus Nijhoff, Amsterdam, 1988), p. 116.Google Scholar
  63. 67.
    (a) E. Bacque, J. P. Pillot, M. Birot, J. Dunogues, P. Lapouyade, E. Bouillon, and R. Pailler, Chem. Mater. 3, 348 (1991); (b) E. Bouillon, R. Pallier, R. Naslain, E. Bacques, J. P. Pillot, M. Birrot, I. Dunogues, and P. V. Huong, Chem. Mater. 3, 356 (1991).Google Scholar
  64. 68.
    H. J. Wu and L. V. Interrante, Chem. Mater. 1, 564 (1989).Google Scholar
  65. 69.
    (a) H. J. Wu and L. V. Interrante, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 33, 210 (1992); (b) L. V. Interrante, C. W. Whit- marsh, W. Sherwood, H.-J. Wu, R. Lewis, and G. Maciel, NATO ASI Ser., Ser. E: Appl. Sci. 297 (Appl. Organomet. Chem. Prepar. Pro- cess. Adv. Mater.), 173 (1995); (c) Q. Liu, H.-J. Wu, R. Lewis, G. E. Maciel, and L. V. Interrante, Chem. Mater. 11, 2038 (1999).Google Scholar
  66. 70.
    C. K. Whitmarsh and L. V. Interrante, Organometallics 10, 1336 (1991).Google Scholar
  67. 71.
    C. Laffon, A. M. Flank, P. Lagarde, and E. Bouillon, Physica B 158, 229 (1989).Google Scholar
  68. 72.
    L. V. Interrante, C. K. Whitmarsh, T. K. Trout, and W. R. Schmidt, in Inorganic and Organometallic Polymers with Special Properties, edited by R. M. Laine (Kluwer Academic, Netherlands, 1992), p. 243.Google Scholar
  69. 73.
    C. L. Schilling Jr. and T. C. Williams, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25, 1 (1984).Google Scholar
  70. 74.
    C. L. Schilling, Jr., Brit. Polym. J. 18, 355 (1986).Google Scholar
  71. 75.
    W. R. Schmidt, V. Sukumar, W. J. Hurley, R. Garcia, L. V. Interrante, R. H. Doremus, and G. M. Renlund, J. Am. Ceram. Soc. 73, 2412 (1990).Google Scholar
  72. 76.
    E. Bouillon, D. Mocaer, J. F. Villeneuve, R. Pailler, R. Naslain, M. Monthioux, A. Oberlin, C. Guimon, and G. Pfister, J. Mater. Sci. 26, 1517 (1991).Google Scholar
  73. 77.
    (a) C. L. Czekaj, M. L. J. Hackney, W. J. Hurley Jr., L. V. Interrante, G. A. Sigel, P. J. Schields, and G. A. Slack, J. Am. Ceram. Soc. 73, 352 (1990); (b) L. V. Interrante, W. R. Schmidt, S. N. Shaikh, R. Garcia, P. S. Marchetti, and G. E. Maciel, in Chemical Processing of Advanced Materials, L. L. Hench and J. R. West, eds. (Wiley, New York, 1992), p. 777; (c) J. A. Jensen, U.S. Patent No. 5,229,468 (July 20,1993); (c) B. E. Fry, A. Guo, and D. C. Neckers, J. Organomet. Chem. 538, 151 (1997).Google Scholar
  74. 78.
    (a) T. L. Smith, Jr., U.S. Patent No. 4,631,179 (December 23, 1986); (b) Q. Liu, H.-J. Wu, R. Lewis, G. E. Maciel, and L. V. Interrante, Chem. Mater. 11, 2038 (1999).Google Scholar
  75. 79.
    H.-J. Wu and L. V. Interrante, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 588 (1991).Google Scholar
  76. 80.
    (a) H.-J. Wu and L. V. Interrante, Macromolecules 25, 1840 (1992); (b) L. V. Interrante, Q. Liu, I. Rushkin, and Q. Shen, J. Organomet. Chem. 521, 1 (1996); (c) W. Habel, A. Oelschlager, and P. Sartori, J. Organomet. Chem. 486, 267 (1995).Google Scholar
  77. 81.
    K. J. Thorne, S. E. Johnson, H. Zheng, J. D. Mackenzie, and M. F. Hawthorne, Chem. Mater. 6, 110 (1994).Google Scholar
  78. 82.
    B. Boury, R. J. P. Corriu, D. Leclerq, P. H. Mutin, J. M. Planeix, and A. Moux, Organometallics 10, 1457 (1991).Google Scholar
  79. 83.
    R. J. P. Corriu, D. Leclerq, P. H. Mutin, J. M. Planeix, and A. Vioux, Organometallics 12, 454 (1993).Google Scholar
  80. 84.
    B. Boury, R J. P. Corriu, D. Leclerq, H. Mutin, J. M. Planeix, and A. Vioux, in Inorganic and Organometallic Polymers with Special  Properties, edited by R. M. Laine (Kluwer Academic, Netherlands, 1992), p. 255.Google Scholar
  81. 85.
    V. B. Boury, L. Carpenter, and R J. P. Corriu, Angew. Chem. Int. Ed. Engl. 29, 785 (1990).Google Scholar
  82. 86.
    (a) J. Masnovi, X. Y. Bu, K. Beyene, P. Heimann, T..Kacilc, A. H. Andrist, and F. I. Hurwitz, Mater. Res. Soc. Symp. Proc. 271, 771 (1992); (b) J. Masnovi, X. Y. Bu, P. Conroy, A. H. Andrist, F. I. Hurwitz and D Miller, Mater. Res. Soc. Symp. Proc. 180, 779 (1988).Google Scholar
  83. 87.
    B. Boury, R. J. P. Corriu, and W. E. Douglas, Chem. Mater. 3, 487 (1991).Google Scholar
  84. 88.
    B. Boury, L. Carpenter, R. Corriu, and H. Mutin, New J. Chem. 14, 535 (1990).Google Scholar
  85. 89.
    R. J. P. Corriu, M. Enders, S. Huille, and J. E. Moreau, Chem. Mater. 6,15 (1994).Google Scholar
  86. 90.
    (a) W. Habel, B. Hamack, C. Hover, and P. Sartori, J. Organomet. Chem. 467, 13 (1994); (b) P. Sartori, W. Habel, B. V. Aefferden, and L. Mayer, Chem. Ind. 12, 54 (1990).Google Scholar
  87. 91.
    (a) C. L. Schilling, Jr., J. P. Wesson, and T. C. Williams, J. Polym. Sci. Polym. Symp. 70, 121 (1983); (b) C. L. Schilling, Jr., J. P. Wesson, and T. C. Williams, Am. Ceram. Soc. Bull. 62,912 (1983); (c) C. L. Schilling, Jr. NTIS Technical Report 83-3, Order No. AD-A141649, 1983; (d) C. L. Schilling, Jr. and T. C. Williams, NTIS Technical Report 83-2, Order No. AD-A141558, 1983.Google Scholar
  88. 92.
    C. L. Schilling, Jr., U.S. Patent No. 4,472,591 (September 18, 1984).Google Scholar
  89. 93.
    C. L. Schilling, Jr., NTIS Technical Report 83-1 Order No. AD- A141546, 1983.Google Scholar
  90. 94.
    S. Yajima, Am. Ceram. Soc. Bull. 62, 893 (1983).Google Scholar
  91. 95.
    (a) D. Seyferth, C. A. Sobon, and J. Boren, New J. Chem. 14, 545 (1990); (b) D. Seyferth, T. G. Wood, H. J. Tracy, and J. L. Robison, J. Am. Ceram. Soc. 75, 1300 (1992).Google Scholar
  92. 96.
    (a) D. Seyferth and H. Lang, Organometallics 10, 551 (1991); (b) D. Seyferth and H. Lang, in Ultrastructure Processing of Advanced Materials, edited by D. R. Uhlmann and D. R. Ulrich (Wiley, New York, 1992), p. 667.Google Scholar
  93. 97.
    D. Seyferth, G. E. Koppetsch, T. G. Woods, H. J. Tracy, J. L. Robin- son, P. Czubarow, M. Tasi, and H. G. Woo, Polym. Prepr (Am. Chem. Soc. Div. Polym. Chem.) 34, 223 (1993).Google Scholar
  94. 98.
    T. G. Wood, Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA., 1984.Google Scholar
  95. 99.
    D. Seyferth, N. Bryson, D. P. Workman, and C. A. Sobon, J. Am. Ceram. Soc. 74, 2687 (1991).Google Scholar
  96. 100.
    D. Seyferth, H. Lang, C. A. Sobon, J. Borm, H. J. Tracy, and N. Bryson, J. Inorg. Organomet. Polym. 2, 59 (1992).Google Scholar
  97. 101.
    (a) E. Bouillon et al., J. Mater. Sci. 26, 1331 (1991); (b) D. M. Kalyon and S. Kovenklioglu, Adv. Polym. Tech. 7, 191 (1987).Google Scholar
  98. 102.
    (a) C. Gerardin, F. Taulelle, J. Livage, M. Birot, and J. Dunogues, Bull. Magn. Reson. 12, 84 (1988); (b) T. Taki, J. Inorg. Organomet. Polym. 2, 269 (1992).Google Scholar
  99. 103.
    (a) K. Okamura, T. Matsuzawa, and Y. Hasegawa, J. Mater. Sci. Lett. 4,55 (1985); (b) K. Okamura, M. Sato, and Y. Hasegawa, J. Mater. Sci. 2, 769 (1983); (c) K. Okamura and T. Seguchi, J. Inorg. Orga- nomet. Polym. 2, 171 (1992); (d) D. W. Matson, R. C. Petersen, and R. D. Smith, Mater. Lett. 4, 429 (1986); (e) M. Takeda, Y. Imai, H. Ickikawa, T. Ishikawa, and K. Okamura, Ceram. Eng. Sci. Proc. 13,209 (1992); (f) Y. Hasegawa, J. Inorg. Organomet. Polym. 2, 161 (1992).Google Scholar
  100. 104.
    X: J. Wang, F. R. Liu, and C. R. Zhang, in Material Research Society International Symposium Proceedings, edited by Y. Han (North- Holland, Amsterdam, 1991), vol. 2, p. 93.Google Scholar
  101. 105.
    K. Okamura, T. Mutsuzawa, M. Sato, Y. Higashiguchi, S. Morozumi, and A. Kohyama, J. Nucl. Mater. 141-143, 102 (1986).Google Scholar
  102. 106.
    (a) J. J: Poupeau, D. Abbe, and J. Jamet, Mater. Res. Soc. Symp. Proc. 17, 287 (1984); (b) M. J. Morris, V. E. McGrath, S. Norris, W. G. Stibbs, R. J. P. Emsley, and J. H. Sharp, Proc. Eur. Conf. Adv. Mater. Process. 2nd. vol. 3. 259 (1991); (c) W. P. Weber and S. Q. Zhou, U.S. Patent No. 5,171,810 (December 15,1992);(d) M. J. Michalczyk, U.S. Patent No. 5,270,429 (December 14, 1993); (e) C. K. Whitmarsh and L. V. Inerrante, U.S. Patent No. 5,153,295 (October 6, 1992); Whitmarsh and L. V. Inerrante; (f) M. Yazdi, D. Dollimore, and D. Agar, Thermochim. Acta 144, 159 (1989); (g) T. Seguchi and K. Okamura, Keobunshi Kakeo 42, 163 (1993).Google Scholar
  103. 107.
    (a) D. Seyferth and Y.-F. Yu, U.S. Patent No. 4,639,501 (January 27, 1987); (b) R. A. Sinclair and R. West, Meet Res. Soc. Symp. Proc. 32, 387 (1984); (c) K. Koga, S. Nagano, S. Mizuta, and M. Nakayama, U.S. Patent No. 4,374,793 (February 22, 1983); (d) T. D. Tilley, U.S. Patent No. 5,229,481 (July 20, 1993); (e) H.-G. Woo and T. D. Tilley, in Ultrastructure Processing of Advanced Materials, edited by D. R. Uhlmann and D. R. Ulrich (Wiley, New York, 1992), p. 651; (f) R. C. West and L. D. David, U.S. Patent No. 4,324,901 (April 13, 1982) (g) R. C. West, U.S. Patent No. 4,260,780 (April 7, 1981).Google Scholar
  104. 108.
    K. A. Brown-Wensley and R. A. Sinclair, U.S. Patent No. 4,537,942 (August 27, 1985)Google Scholar
  105. 109.
    (a) T. J. Barton, S. Ijadi-Maghsoodi, and Y. Pang, U.S. Patent No. 5,241,029 (August 31, 1993); (b) N. I. Baklanova, V. N. Kulyukin, N. Z. Lyakhov, G. Y. Turkina, O. G. Yarosh and M. G. Voronkov, J. Mater. Synth. Proc. 5, 443 (1997).Google Scholar
  106. 110.
    S. Ijada-Maghsoodi, Y. Pang, and T. J. Barton, J. Polym. Sci. 28, 955 (1990).Google Scholar
  107. 111.
    M. Ishikawa, Y. Hasegawa, T. Hatano, and A. Kunai, Organometal- lics 8, 2741 (1989).Google Scholar
  108. 112.
    S. Ijadi-Maghsoodi, X. P. Zhang, Y. Pang, M. Meyer, M. Akinc, and T. J. Barton, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 577 (1991).Google Scholar
  109. 113.
    (a) D. Seyferth, Y.-F. Yu, and G. H. Wiseman, U.S. Patent No. 4,719,273 (January 12, 1988); (b) D. Seyferth, G. H. Wiseman, Y.- F. Yu, T. S. Targos, C. A. Sobon, T. G. Wood, and G. E. Koppetsch, in Silicon Chemistry, edited by J. Y. Corey, E. R. Corey, and P. P. Gaspar (Ellis Harwood, Chichester, UK, 1988), p. 415.Google Scholar
  110. 114.
    (a) S. Ijadi-Maghsoodi and T. J. Barton, Macromolecules 23, 4485 (1990); (b) R. J. P. Corriu, P. Gerbier, C. Guérin, and B. Henner, J. Mater. Chem. 10, 2173 (2000).Google Scholar
  111. 115.
    Y. Pang, S. Ijadi-Maghsoodi, and T. J. Barton, Macromolecules 26, 5671 (1993).Google Scholar
  112. 116.
    (a) F. Babonneau, K. Thorne, and J. D. Mackenzie, Chem. Mater. 1, 554 (1989); (b) K. C. Chen, K. J. Thorne, A. Chemseddine, F. Babonneau, and J. D. Mackenzie, Mater. Res. Soc. Symp. Proc. 121, 571 (1988).Google Scholar
  113. 117.
    R. B. Taylor and G. A. Zank, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 586 (1991).Google Scholar
  114. 118.
    (a) G. T. Burns, R. B. Taylor, Y. Xu, A. Zangvil, and G. A. Zank, Chem. Mater. 4, 1313 (1992); (b) D. R. Bujalski, S. Grigoras, W.-L. Lee, G. M. Wieber, and G. A. Zank, J. Mater. Chem. 8, 1427 (1998); (c) G. A. Zank, in Silicon-Containing Polymers, edited by R. G. Jones, W. Ando, and J. Chrojnowski (Kluwer Academic Publishers, Dordrecht, 2000), pp. 697-726.Google Scholar
  115. 119.
    F. I. Hurwitz, P. Heimann, S. C. Farmer, and D. M. Hembree, Jr., J. Mater. Sci. 28, 6622 (1993).Google Scholar
  116. 120.
    (a) V. Belot, R. J. P. Corriu, D. Leclercq, P. H. Mutin, and A. Vioux, J. Polym. Sci. A Polym. Chem. 30, 613 (1992); (b) J. R. Fox, D. A. White, S. M. Oleff, R. D. Boyer, and P. A. Budinger, Mater. Res. Soc. Syrup. Proc. 73, 395 (1986); (c) P. H. Mutin, J. Am. Ceram. Soc. 85, 1185 (2002).Google Scholar
  117. 121.
    V. Belot, R. J. P. Corriu, D. Leclercq, P. H. Mutin, and A. Vioux, J. Mater. Sci. Lett. 9, 1052 (1990).Google Scholar
  118. 122.
    K. J. Shea, D. A. Loy, and O. Webster, J. Am. Chem. Soc. 114, 6700 (1992).Google Scholar
  119. 123.
    R. H. Baney, G. T. Burns, J. P. Cannady, and T. K. Hilty, in Orga- nosilicon and Bio-organosilicon Chemistry, edited by H. Sakurai (Ellis Harwood, Chichester, 1985), p. 269.Google Scholar
  120. 124.
    R. H. Baney, in Ultrastructure Processing of Ceramics, Glasses and Composites, edited by L. L. Hench and D. R. Ulrich (Wiley- Interscience, New York, 1984), p. 245.Google Scholar
  121. 125.
    R. H. Baney, J. H. Gaul, Jr., and T. K. Hilty, Mater. Res. Soc. Syrup. Proc. 17, 253 (1984).Google Scholar
  122. 126.
    D. C. Deleeuw, J. Lipowitz, and J. A. Rabe, U.S. Patent No. 5,268,336 (December 7, 1993).Google Scholar
  123. 127.
    J. Lipowitz and G. L. Turner, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 29, 74 (1988).Google Scholar
  124. 128.
    (a) J. Lipowitz, H. A. Freeman, R. T. Chen, and E. R. Prack, Adv. Ceram. Mater. 2, 121 (1987); (b) R. M. Salinger, T. D. Barnard, C. T. Li, and L. G. Mahone, Soc. Adv. Mater. Process Eng. Q. 19, 27 (1988).Google Scholar
  125. 129.
    D. R. Stull and H. Prophet, JANAF Thermochemical Tables, 2nd ed., NSRDS-NBS Publication No. 37 (National Bureau of Standards, Washington, D.C., 1971).Google Scholar
  126. 130.
    R. H. Baney, J. H. Gaul, Jr., and T. K. Hilty, Organometallics 2, 859 (1983).Google Scholar
  127. 131.
    R. H. Baney, Chemtech 18 (12), 738 (1988).Google Scholar
  128. 132.
    (a) G. Winter, W. Verbeek, and M. Mansmann, U.S. Patent No. 3,892,583 (July 1, 1975); (b) W. Verbeek, U.S. Patent No. 3,853,567 (December 10, 1974).Google Scholar
  129. 133.
    R. M. Laine, Y. D. Blum, D. Tse, and R. Glaser, in Inorganic and Organometallic Polymers, ACS Syrup. Series No. 360, edited by M. Zeldin, K. J. Wynne, and H.. R. Allcock (American Chemistry Society, Washington, D.C., 1988), p. 124, and references therein.Google Scholar
  130. 134.
    Y. Nakaido, Research Institute for Special Inorganic Materials Report No. 9 (1991), p. 139.Google Scholar
  131. 135.
    D. L. Delaet, Patent Cooperation Treaty International Publication No. WO 91/19688 (December 26, 1991).Google Scholar
  132. 136.
    (a) R. M. Laine, Y. D. Blum, A. Chow, R. Hamlin, K. B. Schwartz, and D. J. Rowecliffe, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 28, 393 (1987); (b) G. E. Legrow, T. F. Lim, J. Lipowitz, and R. S. Reaoch, Am. Ceram Soc. Bull. 66, 363 (1987).Google Scholar
  133. 137.
    (a) S. Ampuero, P. Bowen, and T. A. Ring, Mater. Res. Soc. Symp. Proc. 287, 227 (1993); (b) T. Yamada, T. Kawahito, and T. Iwai, J. Mater. Sci. Lett. 2, 275 (1983); (c) K. S. Mazdiyasni and C. M. Cooke, J. Am. Ceram. Soc. 56, 628 (1973).Google Scholar
  134. 138.
    D. Seyferth, C. C. Prud’Homme, and G. H. Wiseman, U.S. Patent No. 4,397,828 (August 9, 1983).Google Scholar
  135. 139.
    (a) G. T. Burns, C. K. Saha, G. A. Zank, and H. A. Freeman, J. Mater. Sci. 27, 2131 (1992); (b) C. K. Saha and H. A. Freeman, J. Mater. Sci. 27,4651 (1992); (c) G. T. Burns, European Patent Application No. EP 295062 A2 (June 8, 1988); (d) G. T. Burns, U.S. Patent No. 4,774,312 (September 27, 1988).Google Scholar
  136. 140.
    E. Duguet and M. Schappacher, Pct. Int. Application No. WO 92/ 17527 (October 15, 1992).Google Scholar
  137. 141.
    (a) G. T. Burns and G. A. Zank, Polym Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 34, 343 (1993); (b) G. T. Burns, T. P. Angellotti, L. F. Hanneman, G. Chandra, and J. A. Moore, J. Mater. Sci. 22, 2609 (1987).Google Scholar
  138. 142.
    (a) D. Seyferth and G. H. Wiseman, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25, 10 (1984); (b) D. Seyferth, G. H. Wiseman, and C. Prud’Homme, J. Am. Ceram. Soc. 66 (1) C-13 (1983) (c) D. Seyferth, G. H. Wiseman, and C. Prud’Homme, Mater. Res. Soc. Symp. Proc. 17, 263 (1984).Google Scholar
  139. 143.
    Y. Shimizu, Y. Tashiro, H. Aoki, M. Ichiyama, H. Nishii, T. Kishi, K. Okuda, and T. Isoda, European Patent Application No. EP 544959A1 (December 30, 1991).Google Scholar
  140. 144.
    O. Funayama, M. Aral, and T. Isoda, European Patent Application No. EP 303498A1 (August 12, 1988).Google Scholar
  141. 145.
    (a) Y. Nakaido and N. Kozakai, Nippon Kagaku Kaishi 7, 1080 (1989); (b) Y. Nakaido, T. Matsuura, D. Yamashita, M. Okabe, and S. Ishikita, Nippon Kagaku Kaishi 5, 487 (1990).Google Scholar
  142. 146.
    M. Arai, S. Sakurada, T. Isoda, and T. Tomizawa, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 28, 407 (1987).Google Scholar
  143. 147.
    O. Funayama, T. Isoda, H. Kaya, T. Suzuki, and Y. Tashiro, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 542 (1991). 148. A. A. Gallo, U.S. Patent No. 4,778,907 (October 18, 1988).Google Scholar
  144. 149.
    (a) D. Bahloul, M. Pereira, and P. Goursat, Ceram. Int. 18, 1 (1992); (b) F. Sirieix, P. Goursat, A. Lecomte, and A. Dauger, Compos. Sci. Technol. 37, 7 (1990).Google Scholar
  145. 150.
    O. Funayama, H. Nakahara, A. Tezuka, T. Ishii, and T. Isoda, J. Mater. Sci. 29, 2238 (1994).Google Scholar
  146. 151.
    M. G. Salvetti, M. Pijolat, M. Soustelle, and E. Chassagneux, Solid State Ionics 63-65, 332 (1993).Google Scholar
  147. 152.
    D. M. Narsavage, L. V. Interrante, P. S. Marchetti, and G. E. Maciel, Chem. Mater. 3, 721 (1991).Google Scholar
  148. 153.
    R. M. Laine, Platinum Met. Rev. 32, 64 (1988).Google Scholar
  149. 154.
    (a) Y. Blum and R. M. Laine, Organometallics 5, 2081 (1986); (b) R. M. Laine and Y. Blum, U.S. Patent No. 4,612,383 (September 16, 1986).Google Scholar
  150. 155.
    (a) D. Seyferth and G. H. Wiseman, J. Am. Ceram. Soc. C-132 (1984); (b) D. Seyferth, G. H. Wiseman, J. M. Schwark, Y.-F. Yu, and C. A. Poutasse, in Inorganic and Organometallic Polymers (ACS Symp Proc. No. 360), edited by M. Zeldin, K. J. Wynne, and H. R. Allcock (American Chemistry Society, Washington, D.C., 1988), p. 144; (c) D. Seyferth and G. H. Wiseman, in Science of Ceramic Chemical Processing, edited by L. L. Hench and D. R. Ulrich (Wiley, New York, 1986), p. 354; (d) D. Seyferth and G. H. Wiseman, U.S. Patent No. 4,482,669 (November 13, 1984); (e) D. Seyferth, in Transformation of Organometallics into Common and Exotic Mater- ials: Design and Activation, edited by R. M. Laine (Nijhoff, Dor- PYROLYZABILITY OF PRECERAMIC POLYMERS/1005 drecht, 1988), p. 133; (f) R. M. Stewart, N. K. Dando, D. Seyferth, and A. J. Perrotta, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 569 (1991); (g) H. N. Han, D. A. Lindquist, J. S. Hagg- erty, and D. Seyferth, Chem. Mater. 4, 705 (1992); (h) N. R. Dando and A. J. Perrotta, Chem. Mater. 5, 1624 (1993); (i) D. Seyferth and R. M. Stewart, Appl. Organomet. Chem. 11, 813 (1997).Google Scholar
  151. 156.
    (a) K. A. Youngdahl, R. M. Laine, R. A. Kennish, T. R. Cronin, and G. G. A. Balavoine, Mater. Res. Soc. Symp. Proc. 121, 489 (1988); (b) Y. D. Blum, K. B. Schwartz, and R. M. Laine, J. Mater. Sci. 24(5), 1707 (1989).Google Scholar
  152. 157.
    R. M. Laine, Y. D. Blum, R. D. Hamlin, and A. Chow, in Ultrastruc- ture Processing of Advanced Ceramics, edited by J. D. Mackenzie and D. R. Ulrich (Wiley, New York, 1988), p. 761.Google Scholar
  153. 158.
    (a) J. D. Bolt and F. N. Tebbe, U.S. Patent No. 4,730,026 (March 8, 1988); (b) J: J. Lebrun and H. Porte, U.S. Patent No. 4,689,832 (August 25, 1987); (c) J. M. Schwark, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 34, 294 (1993).Google Scholar
  154. 159.
    (a) M. Matsumoto, K. Niwada, and S. Tanaka, Jpn. Kokai Tokkyo Koho JP 61072607 A2 (April 14, 1986); (b) M. Balasubramanian and P. Choudhury, U.S. Patent No. 5,010,157 (December 9, 1988) (c) Y. Takeda, M. Takamizawa, T. Takeno and A. Hayashida, European Patent Application EP 323062 (December 9, 1988).Google Scholar
  155. 160.
    (a) D. Seyferth, H. Lang, H. J. Tracy, C. Sobon, and J. Borm, Polym. Prepr. (Am. Chem. Soc. Div. Polym Chem.) 32, 581 (1991); (b) D. Seyferth, J. M. Schwark, and Y. F. Yu, U.S. Patent No. 4,767,876 (August 30, 1988); (c) D. Serferth, Y. F. Yu, and T. S. Targos, U.S. Patent No. 4,705,837 (November 10,1987); (d) D. Seyferth and Y. F. Yu, U.S. Patent No. 4,650,837 (March 17, 1987); (e) D. Seyferth, T. G. Wood, and Y. F. Yu, U.S. Patent No. 4,645,807 (February 24, 1987) (f) D. Seyferth and J. M. Schwark, U.S. Patent No. 4,720,532 (January 19, 1988).Google Scholar
  156. 161.
    Y. D. Blum, K. B. Schwartz, E. J. Crawford, and R. M. Laine, Mater. Res. Soc. Symp. Proc. 121, 565 (1988).Google Scholar
  157. 162.
    (a) Y. D. Blum, G. A. McDermott, and A. S. Hirschon, in Inorganic and Organometallic Oligmers and Polymers, edited by J. F. Harrod and R. M. Laine (Kluwer Academic, Netherlands, 1991), p.161; (b) Y. D. Blum, G. A. McDermott, R. B. Wilson, and A. S. Hirschon, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 548 (1991).Google Scholar
  158. 163.
    D. Mocaer, R. Pailler, R. Naslaih, C. Richard, J. P. Pillot, J. Dunogues, C. Gerardin, and F. Taulelle, J. Mater. Sci. 28, 2615 (1993).Google Scholar
  159. 164.
    (a) D. Mocaer, R. Pailler, R. Naslain, C. Richard, J. P. Pillot, and I. Dunogues, J. Mater. Sci. 28, 2632 (1993); (b) D. Mocaer, R. Pallier, R. Naslain, C. Richard, J. P. Pillot, J. Dunogues, O. Delverdier, and M. Monthioux, J. Mater. Sci. 28, 2639 (1993); (c) D. Mocaer, R. Pailler, R. Naslain, C. Richard, J. P. Pillot, J. Dunogues, C. Darnez, M. Chambon, and M. Lahaye, J. Mater. Sci. 28, 3049 (1993); (d) D. Mocaer, G. Chollon, R. Pailler, L. Filipuzzi, and R. Naslain, J. Mater. Sci. 28, 3059 (1993).Google Scholar
  160. 165.
    B. G. Penn, J. G. Daniels, F. E. Ledbetter III, and J. M. Clemons, Polym. Eng. Sci. 26, 1191 (1986).Google Scholar
  161. 166.
    (a) J. P. Cannady, U.S. Patent No. 4,543,344 (September 24, 1985); (b) J. P. Cannady, U.S. Patent No. 4,540,803 (September 10, 1985).Google Scholar
  162. 167.
    (a) J. Lipowitz, J. A. Rabe, and T. M. Carr, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 28, 411 (1987); (b) J. Lipowitz, J. A. Rabe, and T. M. Carr, in Inorganic and Organometallic Polymers (ACS Symposium Series 360), edited by M. Zeldin, K. J. Wynne, and H. R. Allcock (American Chemical Society, Washington, D.C., 1988), p. 156; (c) J. H. Gaul, Jr., U.S. Patent No. 4,340,619 (July 20, 1982).Google Scholar
  163. 168.
    R. H. Baney, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 25, 2 (1984).Google Scholar
  164. 169.
    G. E. Legrow, T. F. Lim, J. Lipowitz, and R. S. Reaoch, Mater. Res. Soc. Symp. Proc. 73, 553 (1986).Google Scholar
  165. 170.
    J. H. Gaul, Jr., U.S. Patent No. 4,312,470 (January 26, 1982).Google Scholar
  166. 171.
    J. P. Cannady, U.S. Patent No. 4,535,007 (August 13, 1985).Google Scholar
  167. 172.
    N. Brodie, J: P. Majoral, and J.-P. Disson, Inorg. Chem. 32, 4646 (1993).Google Scholar
  168. 173.
    W. R. Schmidt, P. S. Marchetti, L. V. Interrante, W. J. Hurley, Jr., R. H. Lewis, R. H. Doremus, and G. E. Maciel, Chem. Mater. 4, 937 (1992).Google Scholar
  169. 174.
    W. R. Schmidt: V. Sukumar, W. J. Hurley, Jr., R. Garcia, R. H. Doremus, L. V. Interrante, and G. M. Renlund, J. Am. Ceram. Soc. 73,2412 (1990).Google Scholar
  170. 175.
    G. T. Burns and G. Chandra, J. Am. Ceram. Soc. 72, 333 (1989).Google Scholar
  171. 176.
    K. Okamura, M. Sato, and Y. Hasegawa, Ceram. Int. 13, 55 (1987)Google Scholar
  172. 177.
    N. S. C. K. Yive, R. Corriu, D. Leclercq. P. H. Mutin, and A. Vioux, New J. Chem. 15, 85 (1991).Google Scholar
  173. 178.
    N. S. C. K. Yive, R. J. P. Corriu, D. Leclercq. P. H. Mutin, and A. Vioux, Chem. Mater. 4, 141 (1992).Google Scholar
  174. 179.
    D. Bahloul, M. Pereira, and P. Goursat, J. Am. Ceram. Soc. 76, 1163 (1993).Google Scholar
  175. 180.
    D. Bahloul, M. Pereira, and P. Goursat, J. Am. Ceram. Soc. 76, 1156 (1993).Google Scholar
  176. 181.
    (a) N. S. C. K. Yive, R. J. P. Corriu, D. Leclercq, P. H. Mutin, and A. Vioux, Chem. Mater. 4, 1263 (1992); (b)J. Bill, J. Seita, G. Thurn, J. Durr, J, Canel, B. Z. Janos, A. Jalowiecki, D. Sauter, S. Schempp, H. P. Lamparter, J. Mayer, and F. Aldinger, Phys. Status Solidi A 166, 269 (1998).Google Scholar
  177. 182.
    (a) C. M. Gerardin, F. Taulelle, and J. Livage, Mater. Res. Soc. Symp. Proc. 287, 233 (1993); (b) C. Gerardin, F. Taulelle, and J. Livage, J. Chim. Phys. 89, 461 (1992); (c) D. Bahloul, P. Goursat, and A. Lavedrine, J. Eur. Ceram. Soc. 11, 63 (1993).Google Scholar
  178. 183.
    (a) W. Toreki, C. D. Batich, M. D. Sacks, and A. A. Morrone, Ceram. Eng. Sci. Proc. 11, 1371 (1990); (b) W. Toreki, N. A. Creed, and C. D. Batich, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 31, 611 (1990); (c) A. A. Morrone, W. Toreki, and C. D. Batich, Mater. Lett. 11,19 (1991).Google Scholar
  179. 184.
    (a) A. Lavedrine, D. Bahloul, P. Goursat, N. C. K. The, R. Corriu, D. Leclerq, H. Mutin, and A. Viola, J. Eur. Ceram. Soc. 8, 221 (1991); (b) J. Lucke, J. Hacker, D. Suttor and G. Ziegler, Appl. Organomet. Chem. 11, 181 (1997).Google Scholar
  180. 185.
    B. Arkles, J. Electrochem. Soc. 133 (1), 233 (1986).Google Scholar
  181. 186.
    (a) J. M. Schwark, U.S. Patent No. 4,929,704 (May 29, 1990); (b) J. M. Schwark and M. J. Sullivan, Mater. Res. Soc. Symp. Proc. 271, 807 (1992); (c) J. M. Schwark, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 567 (1991); (d) A. Kojima, S. Hoshii, and T. Muto, J. Mater. Sci. Lett. 21, 757 (2002).Google Scholar
  182. 187.
    Y. Abe, T. Ozai, Y. Kuno, Y. Nagao, and T. Misono, J. Inorg. Organomet. Polym. 2, 143 (1992).Google Scholar
  183. 188.
    (a) J. M. Schwark, U.S. Patent No. 5,155,181 (October 13, 1992); (b) J. M. Schwark, U.S. Patent No. 5,021,533 (June 4, 1991); (c) J. M. Schwark, U.S. Patent No. 5,032,649 (July 16, 1991); (d) U.S. Pat. 5,001,090 (Mar. 19, 1991), J. M. Schwark, U.S. Patent No. 5,001,090 (March 19, 1991).Google Scholar
  184. 189.
    D. Seyferth, C. Strohmann, N. D. Dando, and A. J. Perrotta, Chem Mater. 7, 2058 (1995).Google Scholar
  185. 190.
    Y. L. Li, E. Kroke, R. Riedel, C. Fasel, C. Gervais, and F. Babonneau, Appl. Organomet. Chem. 15, 820 (2001).Google Scholar
  186. 191.
    T. Vaahs, M. Bruck, and W. D. G. Boker, Adv. Mater. 4, 224 (1992).Google Scholar
  187. 192.
    K. Feng, A. Rodriguez, and Y. H. Mariam, Polym. Mater. Sci. Eng. (ACS) 69, 337 (1993).Google Scholar
  188. 193.
    K. Feng and Y. H. Mariam, Appl. Organomet. Chem. 7, 253 (1993).Google Scholar
  189. 194.
    (a) K. Feng and Y. H. Mariam, Macromolecules 24, 4729 (1991); (b) K. Feng and Y. H. Mariam (Figure 47.1 are unpublished results). 195. Z. Du, J. Chen, and T. Han, Chin. J. Polym. Sci. 7, 31 (1989).Google Scholar
  190. 196.
    H. Qiu, S. Yu, H. Ren, and Z. Du, Polym. Bull. 27, 607 (1992).Google Scholar
  191. 197.
    X. Bao and M. J. Edirisinghe, J. Mater. Chem. 10, 395 (2000).Google Scholar
  192. 198.
    H.-P. Baldus, W. Schnick, J. Lucke, U. Wannagat, and G. Bogedain, Chem. Mater. 5, 845 (1993).Google Scholar
  193. 199.
    M. Horz, A. Zern, F. Berger, J. Haug, K. Muller, F. Aldinger, and M. Weinmann, J. Eur. Ceram. Soc. 25, 99 (2005).Google Scholar
  194. 200.
    A. Soum In Silicon-Containing Polymers, edited by R. G. Jones, W. Ando, and J. Chojnowski (Kluwer Academic Publishers, Dor- drecht, 2000), pp. 323-349.Google Scholar
  195. 201.
    E. Kroke, Y. L. Li, C. Konetschny, E. Lecomte, C. Fasel, and R. Riedel, Mater. Sci. Eng. R 26, 97 (2000).Google Scholar
  196. 202.
    R. Riedel, A. Kienzle, W. Dressler, L. Ruwisch, J. Bill, and F. Aldinger, Nature 382, 796 (1996).Google Scholar
  197. 203.
    B. Jaschke, U. Klingebiel, R. Riedel, N. Doslik, and D. Gadow, Appl. Organomet. Chem. 14, 671 (2000).Google Scholar
  198. 204.
    H.-P. Baldus and M. Jansen, Angew. Chem. Int. Ed. Engl. 36, 328 (1997).Google Scholar
  199. 205.
    R. Riedel and W. Dressler, Ceram. Int. 22, 233 (1996).Google Scholar
  200. 206.
    T. Wideman, K. Su, E. E. Remsen, G. A. Zank, and L. G. Sneddon, Chem. Mater. 7, 2203 (1995).Google Scholar
  201. 207.
    D. Srivastava, E. N. Duesler, and R. T. Paine, Eur. J. Inorg. Chem. 855 (1998).Google Scholar
  202. 208.
    Q. D. Nghiem, J.-K. Jeon, L.-Y. Hong, and D.-P. Kim, J. Organomet. Chem. 688, 27 (2003).Google Scholar
  203. 209.
    W. R. Schmidt, D. M. Narsavage-Heald, D. M. Jones, P. S. Marchetti, D. Raker, and G. E. Maciel, Chem. Mater. 11, 1455 (1999).Google Scholar
  204. 210.
    (a) Z.-C. Wang, F. Aldinger, and R. Riedel, J. Am. Ceram. Soc. 84, 2179 (2001); (b) J. Bill, T. W. Kamphowe, A. Muller, T. Wichmann, A. Zern, A. Jalowieki, J. Mayer, M. Weinmann, J. Schuhmacher, K. Muller, J. Peng, H. J. Seifert, and F. Aldinger, Appl. Organomet. Chem. 15, 777 (2001).Google Scholar
  205. 211.
    F. Aldinger, M. Weinmann, and J. Bill, Pure Appl. Chem. 70, 439 (1998).Google Scholar
  206. 212.
    R. Riedel, J. Bill, and A. Kienzle, Appl. Organomet. Chem. 10, 241 (1996).Google Scholar
  207. 213.
    S. Bernard, M. Weinmann, D. Cornu, P. Miele, and F. Aldinger, J. Eur. Ceram. Soc. 25, 251 (2005).Google Scholar
  208. 214.
    M. Weinmann, R. Haug, J. Bill, F. Aldinger, J. Schuhmacher, and K. Muller, J. Organomet. Chem. 541, 345 (1997).Google Scholar
  209. 215.
    (a) A. Muller, P. Gerstel, M. Weinmann, J. Bill, and F. Aldinger, Chem. Mater. 14, 3398 (2002); (b) A. Muller, J. Peng, H. J. Seifert, J. Bill, and F. Aldinger, Chem. Mater. 14, 3406 (2002). 216. H. P. Baldus, O. Wagner, and M. Jansen, Key Eng. Mater. 89, 75 (1994).Google Scholar
  210. 217.
    P. Baldus, M. Jansen, and D. Sporn, Science 285, 699 (1999).Google Scholar
  211. 218.
    A. Muller, P. Gerstel, M. Weinmann, J. Bill, and F. Aldinger, J. Eur. Ceram. Soc. 20, 2655 (2000).Google Scholar
  212. 219.
    D. Seyferth, M. Tasi, and H. G. Woo, Chem. Mater. 7, 236 (1995).Google Scholar
  213. 220.
    S. J. Ting, C. J. Chu, and J. D. Mackenzie, J. Mater. Res. 7, 164 (1992); (b) G. D. Soraru, F. Babonneau, and J. D. Mackenzie, J. Mater. Sci. 25, 3886 (1990); (c) G. R. Hatfield and K. R. Carduner, J. Mater. Sci. 24, 4209 (1989); (d) F. Babonneau, J. Livage, and R. M. Laine, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 32, 579 (1991); (e) J. Lipowitz, J. A. Rabe, and T. M. Carr, Spectrosc. Lett. 20,53 (1987); (f) D. Bahloul, M. Pereira and C. Gerardin, J. Mater. Chem. 7, 109 (1997); (g) D. Bahloul, M. Pereira and C. Gerardin, J. Mater. Chem. 7, 117 (1997); (h) H. Q. Ly, R. Taylor, R. J. Day, and F. M. Heatley, J. Mater. Sci. 36,4037 (2001); (i) C. Gervais, F. Babonneau, L. Ruwisch, R. Hauser, and R. Riedel, Can. J. Chem. 81,1359 (2003).Google Scholar
  214. 221.
    T. F. Cooke, J. Am. Ceram. Soc. 74, 2959 (1991).Google Scholar
  215. 222.
    K. Okamura, Composites 18, 107 (1987).Google Scholar
  216. 223.
    J. Lipowitz, Am. Ceram. Soc. Bull. 70, 1888 (1991).Google Scholar
  217. 224.
    W. Wade Adams and S. Kumar, in Ultrastructure Processing of Advanced Materials, edited by D. R. Uhlmann and D. R. Ulrich (Wiley, New York, 1992), p. 343.Google Scholar
  218. 225.
    N. R. Langley, G. E. LeGrow, and J. Lipowitz, in Reinforced Ceramic Composites, edited by K. S. Mazdiyasni (Noyes, Park Ridge, NJ, 1989), p. 63.Google Scholar
  219. 226.
    W. H. Atwell, P. Foley, W. E. Hauth, R. E. Jones, N. R. Langley, and R. M. Salinger, Final Report No. AFWAL-TR-86-4146 (1989).Google Scholar
  220. 227.
    (a) D. J. Pysher, K. C. Goretta, R S. Hodder, Jr., and R. E. Tressler, J. Am. Ceram. Soc. 72, 284 (1988); (b) B. Jaschke, U. Klingebiel, R. Riedel, N. Doslik, and D. Gadow, Appl. Organomet. Chem. 14, 671 (2000).Google Scholar
  221. 228.
    (a) T. Shimoo, H. Chen, and K. Okamura, J. Mater. Sci. 29, 456 (1994); (b) W. Habel, B. Hamack, C. Nover, and P. Sartori, J. Organomet. Chem. 467, 13 (1994); (c) D. R. Bujalski, G. A. Zank, and T. D. Barnard, U.S. Patent No. 5,262,553 (November 16, 1993) (d) Y. Yokoyamo, T. Nanba, I. Yasui, H. Kays, T. Maeshima, and T. Isoda, J. Am. Ceram. Soc. 74, 654 (1991); (e) T. Ishikawa, T. Yamamura, and K. Okamura, J. Mater. Sci. 27, 6627 (1992); (f) K. E. Gonsalves, T. D. Xiao, and P. R. Strutt, Ind. J. Technol. 31, 436 (1993); (g) S. T. Schwab et al., Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.) 34, 296 (1993); (h) G. Passing, H. Schonfelder, R. Riedel, and R. J. Brook, Br. Ceram. Trans. 92, 21 (1993); (i) W. Toreki, G. J. Choi, C. D. Batich, M. D. Sacks, and M. Saleem, Ceram. Eng. Sci. Proc. 13, 198 (1992); (j) A. Herzog and U. Vogt, Adv. Eng. Mater. 4, 877 (2002); (k) F. Cao, X.-D. Li, J.-H. Ryu, and D.-P. Kim, J. Mater. Chem. 13, 1914 (2003); (l) L. Macdonald, Ceramic Transactions, 144 (Advanced SiC/SiC Ceramic Composites: Developments and Applications in Energy Systems), 87-95 (2002); (m) A. Herzog and U. Vogt, Adv. Eng. Mater. 4, 877 (2002); (n) A. Herzog and U. Vogt, Ceram. Eng. Sci. Proc. 23, 19 (2002); (o) J. Clade, E. Seider, and D. Sporn, J. Eur. Ceram. Soc. 25, 123 (2005).Google Scholar
  222. 229.
    P. Baldus, M. Jansen, and D. Sporn, Science 285, 699 (1999).Google Scholar
  223. 230.
    T. Ishikawa, Y. Kohtoku, K. Kumagawa, T. Yamamura, and T. Nagasawa, Nature (London) 391, 773 (1998).Google Scholar
  224. 231.
    M. W. Pitcher, S. J. Joray, and P. A. Bianconi, Adv. Mater. 16, 706 (2004).Google Scholar
  225. 232.
    P. Colombo and M. Modesti, J. Am. Ceram. Soc. 82, 573 (1999). 233. P. Colombo and M. Modesti, J. Sol-Gel Sci. Technol. 14, 103 (1999).Google Scholar
  226. 234.
    P. Colombo and J. R. Hellmann, Mat. Res. Innovat. 6, 260 (2002). 235. I.-K. Sung, S.-B. Yoon, J.-S. Yu, and D. P. Kim, Chem. Commun. 1480 (2002).Google Scholar
  227. 236.
    M. R. Nangrejo and M. J. Edirisinghe, J. Porous Mater. 8, 131 (2002). 237. P. Colombo, J. R. Hellmann, and D. L. Shellman, J. Am. Ceram. Soc. 85,2306 (2002).Google Scholar
  228. 238.
    P. Colombo and E. Bernardo, Compos. Sci. Technol. 63, 2353 (2003).Google Scholar
  229. 239.
    T. Takahashi and P. Colombo, J. Porous Mater. 10, 113 (2003).Google Scholar
  230. 240.
    Y. W. Kim, S. H. Kim, H. D. Kim, and C. B. Park, J. Mater. Sci. 39, 5647 (2004).Google Scholar
  231. 241.
    R. Melcher, P. Cromme, M. Scheffler, and P. Greil, J. Am. Ceram. Soc. 86, 1211 (2003).Google Scholar
  232. 242.
    P. Colombo, K. Perini, G. Bernardo, T. Capelletti, and G. Maccagnan, J. Am. Ceram. Soc. 86, 1025 (2003).Google Scholar
  233. 243.
    Q.-M. Cheng, L. V. Interrante, M. Lienhard, Q. Shen, and Z. Wu, J. Eur. Ceram. Soc. 25, 233 (2005).Google Scholar
  234. 244.
    (a) L. V. Interrante, K. Moraes, Q. Liu, A. Puerta, and L. G. Sneddon, Pure Appl. Chem. 74, 2111 (2002); (b) K. Moraes, J. Vosburg, D. Wark, L. V. Interrante, A. R. Puerta, L. G. Sneddon, and M. Narisawa, Chem. Mater. 16, 125 (2004).Google Scholar
  235. 245.
    X. Bao and M. J. Edirisinghe, Mater. Technol. (Poulton-le-Fylde, United Kingdom) 15(2), 137 (2000).Google Scholar
  236. 246.
    M. Sternitzke, J. Eur. Ceram. Soc. 17, 1061 (1997).Google Scholar
  237. 247.
    R. J. P. Curriu, Angew. Chem. Int. Ed. 39, 1376 (2000).Google Scholar
  238. 248.
    (a) C. K. Narula, A. Varshney, M. P. Everson, P. Schmitz, L. F. Allard, A. Gandopadhyay, T. S. Lewkbandara, C. H. Winter, P. Czubarow, and D. Seyferth, Mater. Res. Soc. Symp. Proc. 495, 287 (1998); (b) M. Buchmann, R. Gadow, E. Scherer, and M. Speicher, Ceram. Trans. 139, 3 (2002).Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2007

Authors and Affiliations

  • Yi Pang
    • 1
  • Ke Feng
    • 2
  • Yitbarek H. Mariam
    • 3
  1. 1.Department of ChemistryUniversity of AkronAkron
  2. 2.Department of Chemistry & Center for High Performance Polymers and CompositClark Atlanta UniversityAtlanta
  3. 3.Department of Chemistry & Center for High Performance Polymers and CompositClark Atlanta UniversityAtlanta

Personalised recommendations