Summary
The paper shows a number of investigation results about three- dimensional-bending of profiles. The investigations concentrated on two-dimensional bending using a conventional three-roll-bending machine with a simultaneous deflection of the profiles towards the third axis by means of a special device. The special device consists of a hydraulic cylinder giving the motion and the required force for bending in the third axis coupled with a guiding tool to guide the profile in the 3D-space. The most important aspect of these tools is the use of the previous plastic deformation in the 2D-bending zone for an easier bending in the 3D-space through the superposition of lateral forces. By means of this machine set-up both symmetrical and asymmetrical profiles can be bent three-dimensionally and the unwanted torsion of asymmetrical profiles can be prevented through a compensation moment.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Arendes D., Direkte Fertigung gerundeter Aluminiumprofile beim Strangpressen. Dr.-Ing. thesis, University of Dortmund, Shaker Verlag Aachen, 1999.
Arendes D., Chatti S., Kleiner M., “Forming of Aluminium Extrusions for Structural Elements”, 6th ICTP – International Conference on Technology of Plasticity, Nuremberg, 1999, p. 2337–2342.
Arendes D., Kleiner M., Kalz S., Kopp R., “Strangpressen gerundeter Aluminiumprofile”, Aluminium, vol. 76 (2000) no. 3, p. 141–148.
Arnet H., Profilbiegen mit kinematischer Gestalterzeugung, Dr.-Ing. thesis, University of Erlangen-Nuremberg, Meisenbach Verlag Bamberg, 1999.
Becker D., Klaus A., Kleiner M., “Innovative Fertigung von 3D-gekrümmten Strangpressprofilen”, ZWF, issue 9, 2003.
Chatti S., Optimierung der Fertigungsgenauigkeit beim Profilbiegen, Dr.-Ing. thesis, University of Dortmund, Shaker Verlag Aachen, 1998.
Chatti S., Finckenstein E. v., Kleiner M., “Reduktion der Querschnittsverformung beim Biegen von Profilen”, Blech Rohre Profile, vol. 46 (1999) no. 3, p. 38–42.
Chatti S., Finckenstein E. v., Kleiner M., “Verfahrenskombination steigert Flexibilität beim Biegen von Profilen”, Maschinenmarkt, vol. 11 (1999) no. 3, p. 26–30.
Chatti S., Klimmek Ch., Kleiner M., “System for Optimisation of Product and Process Design in Profile Bending”, Proceedings of the 4th International ESAFORM Conference on Material Forming, Liege, April 23–25, 2001, vol. 2 (2001), p. 785–788.
Chatti S., Dirksen U., Kleiner M., “Process Control Strategies for Profile Bending”, Proceedings of the 10th SheMet International Conference on Sheet Metal, Ulster, Northern of Ireland, April 14–16, 2003, p. 313–320.
Chatti S., Heller B., Ridane N., Kleiner M., “Anpassungsfähig – Prozesskette zur Herstellung von Leichtbaustrukturen aus Tailor Rolled Blanks”, Maschinenmarkt, vol. 7, 2003, p. 24–27.
Chatti S., Dirksen U., Kleiner M., “Optimization of the Design and Manufacturing Process of Bent Profiles”, Journal of the Mechanical Behaviour of Materials, vol. 15, no. 6, 2004, ISSN 0334-8938, p. 437–444.
Chatti S., Production of Profiles for Lightweight Structures, habilitation thesis, University of Franche-Comté, France, books on demand, 2005.
Finckenstein E. v., Adelhof A., Kleiner M., “Erweiterung der Verfahrensgrenzen beim Hochkantbiegen im Walzrundverfahren”, Blech Rohre Profile, vol. 35 (1988) no. 10, p. 783–787.
Geiger M., Arnet H., Engel U., Vollertsen F., “Flexibles Biegen stranggepresster Aluminium-Profile”, Blech Rohre Profile, vol. 42 (1995) no. 1, p. 31–34.
Kajrup G., Klein W., “Profilrundbiegen – Anwendung und Entwicklung”, Blech Rohre Profile, vol. 32 (1985) no. 8, p. 419–423.
Klaus A., Verbesserung der Fertigungsgenauigkeit und der Prozesssicherheit des Rundens beim Strangpressen, Dr.-Ing. thesis, University of Dortmund, Shaker Verlag Aachen, 2002.
Kleiner M., Arendes D., Klaus A., “Verfahren und Vorrichtung zur Veränderung der Austrittsrichtung des Pressgutes beim Strangpressen” German Patent, 10.02. 2000.
Kraus J., Laserstrahlumformen von Profilen, Dr.-Ing. thesis, University of Erlangen-Nuremberg, Meisenbach Verlag, 1997.
Lange K., Umformtechnik, Handbuch für Industrie und Wissenschaft, vol. 3: Blechumformung, Springer, Berlin, 1990.
Neugebauer R., Blau P., Drossel W-G., “3D-Freiformbiegen von Profilen”, ZWG, 2001, p. 11–12.
N. N., Vorrichtung zum Wendelbiegen, company brochure, Franz Thoman Maschinenbau, 1998.
N.N., General Overview CNC Contour Roll Forming Machine, company brochure, October 1998, USA.
N. N., www.kaercher-zell.de, Website Kärcher GmbH, 2005.
N.N., www.miic.de. Website of MiiC & Co GmbH, 2005.
N.N., Multi-Bender, company brochure, MiiC & Co GmbH, 2005.
N.N., Highly improved Functions and Productivity for Tube Bending, company brochure, Nissin Precision Machines Co., Ltd., 2005.
N.N., www.nissin-precision.de, Website Nissin Precision machines Co., Ltd., 2005.
Pahl G., Beitz W., Feldhusen J., Grote K.-H., Konstruktionslehre, 5th edition., Springer, 2004.
Späth W., “Gute Chancen – Gebogene Rahmenprofile aus Magnesium mit komplizierten Querschnitten automatisch herstellen in Grossserien”, Maschinenmarkt, Würzburg, vol. 97 (1991) no. 29, p. 56–61.
Späth W, “Biegen grosser Strangpressprofile für Aluminiumwagen”, Aluminium, vol. 67 (1991) no. 6, p. 556–557.
Sprenger A., Adaptives Streckbiegen von Aluminium-Strangpressprofilen, Dr.-Ing. thesis, University of Erlangen-Nuremberg, Meisenbach Verlag Bamberg, 1999.
Vollertsten F., Sprenger A., Krause J., Arnet H., “Extrusion Channel and Profile Bending – A Review”, Journal of Materials Processing Technology, vol. 87 (1999) p. 1–27.
Weippert R. G., Das adaptive Streckbiegen von Aluminiumhohlprofilen, ein Beitrag zum integrierten Technologie-und Innovationsmanagement, VDI Report, 2: Fertigungstechnik, no. 438, Dr.-Ing. thesis, ETH Zurich, 1997.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Chatti, S., Hermes, M., Kleiner, M. (2007). Three-Dimensional Bending of Profiles by Stress Superposition. In: Advanced Methods in Material Forming. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-69845-0_6
Download citation
DOI: https://doi.org/10.1007/3-540-69845-0_6
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-69844-9
Online ISBN: 978-3-540-69845-6
eBook Packages: EngineeringEngineering (R0)