Advertisement

Adhesion and Surface Modification

  • Béla Pukánszky
  • Erika Fekete
Chapter
Part of the Advances in Polymer Science book series (POLYMER, volume 139)

Abstract

This review emphasizes the role of interactions in particulate filled composites. In an introductory section a general view is given about the factors influencing composite properties. Two basic type of interactions must be considered: particle/particle and matrix/filler interaction. The effect of the former is detrimental to composite properties, it decreases strength and impact resistance. The occurrence and extent of aggregation is determined by the relative adhesion and shear forces during homogenization. Due to matrix/filler interaction an interphase forms spontaneously in the composite with properties different from those of both components. The amount and characteristics of the interphase strongly influence composite properties. The strength of adhesion between the components can be characterized by thermodynamic quantities, mainly by the reversible work of adhesion. The most important techniques used for the estimation of the strength of interaction and the properties of the interphase are briefly reviewed. The modification of interactions is achieved through the surface treatment of the filler. Surface treatments are divided into four arbitrary groups and are discussed accordingly, i.e. non-reactive and reactive treatment, application of functionalized polymers and introduction of a soft interlayer around the particles. The practical relevance of interactions and their modification is also mentioned in the last section.

Keywords

aggregation interfacial interaction reversible work of adhesion wettability matrix-filler interaction surface treatment interphase surfactant coupling agent elastomer interlayer 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Vink D (1990) Kunststoffe 80:842Google Scholar
  2. 2.
    Pukánszky B (1995) In: Karger-Kocsis J (ed) Polypropylene. Structure, Blends and Composites, vol 3. Chapman and Hall, London, p 1Google Scholar
  3. 3.
    Krysztafkiewicz A (1988) Surface Coatings Technol 35:151CrossRefGoogle Scholar
  4. 4.
    Vörös G, Fekete E, Pukánszky B (1997) J. Adhesion 64: 229CrossRefGoogle Scholar
  5. 5.
    Pukánszky B, Turcsányi B, Tüdõs F (1988) In: Ishida H (ed) Interfaces in polymer, ceramic, and metal matrix composites. Elsevier, New York, p 467Google Scholar
  6. 6.
    Pukánszky B (1990) Composites 21: 255CrossRefGoogle Scholar
  7. 7.
    Vollenberg P, Heikens D, Ladan HCB (1988) Polym Compos 9: 382CrossRefGoogle Scholar
  8. 8.
    Pukánszky B,V örös G (1993) Compos Interfaces 1:411Google Scholar
  9. 9.
    Riley AM, Paynter CD, McGenity PM, Adams JM (1990) Plast Rubber Process Appl 14:85Google Scholar
  10. 10.
    Menczel J, Varga J (1983) J Thermal Anal 28:161CrossRefGoogle Scholar
  11. 11.
    Fujiyama M, Wakino T (1991) J Appl Polym Sci 42: 2739CrossRefGoogle Scholar
  12. 12.
    Pukánszky B, Mudra I, Staniek P (1997) J Vinyl Additive Technol 3: 53CrossRefGoogle Scholar
  13. 13.
    Bezerédi Á, Mudra I, Pukánszky B, Structure/Property Correlations in Nucleated PP Polymers; Impact Resistance, submitted to J Appl Polym SciGoogle Scholar
  14. 14.
    Schlumpf HP (1990) Chimia 44: 359Google Scholar
  15. 15.
    Rothon R (1995) Particulate-filled polymer composites. Longman, HarlowGoogle Scholar
  16. 16.
    Schlumpf HP (1983) Kunststoffe 73: 511Google Scholar
  17. 17.
    Nielsen LE (1974) Mechanical properties of polymers and composites. Marcel Dekker, New YorkGoogle Scholar
  18. 18.
    Svehlova V, Poloucek E (1987) Angew Makromol Chem 153:197CrossRefGoogle Scholar
  19. 19.
    Ess JW, Hornsby PR (1987) Plast Rubber Process Appl 8:147Google Scholar
  20. 20.
    Adams MJ, Mullier MA, Seville JPK (1987) In: Briscoe BJ, Adams MJ (eds) Tribology in particulate technology. Adam Hilger, Bristol, p 375Google Scholar
  21. 21.
    Tabor D (1987) In: Briscoe BJ, Adams MJ (eds) Tribology in particulate technology. Adam Hilger, Bristol, p 206Google Scholar
  22. 22.
    Adams MJ, Edmondson B (1987) In: Briscoe BJ, Adams MJ (eds) Tribology in particulate technology. Adam Hilger, Bristol, p 154Google Scholar
  23. 23.
    Balachandran W (1987) In: Briscoe BJ, Adams MJ (eds) Tribology in particulate technology. Adam Hilger, Bristol, p 135Google Scholar
  24. 24.
    Goren SL (1971) J Colloid Interface Sci 36: 94CrossRefGoogle Scholar
  25. 25.
    Pukánszky B, Fekete E (1997) Aggregation tendency of particulate fillers: determination and consequences, paper presented at Eurofillers 1997, September 7–11, ManchesterGoogle Scholar
  26. 26.
    Allen KW (1988) Phys Technol 19: 234CrossRefGoogle Scholar
  27. 27.
    Wu S (1978) In: Paul DR, Newman S (eds) Polymer blends. Academic Press, New York, vol1,p243Google Scholar
  28. 28.
    Allen KW (1987) J Adhesion 21: 261CrossRefGoogle Scholar
  29. 29.
    Derjaugin BV (1955) Research 8: 70,365Google Scholar
  30. 30.
    Schreiber HP (1993) In: Akovali G (ed) The interfacial interfacial interactions in polymeric composites. Kluwer, Amsterdam, p 21Google Scholar
  31. 31.
    Good RJ (1977) J Colloid Interface Sci 59: 398CrossRefGoogle Scholar
  32. 32.
    Fowkes FM (1964) Ind Eng Chem 56:40CrossRefGoogle Scholar
  33. 33.
    Fowkes FM (1968) In: Fowkes FM (ed) Hydrophobic surfaces. Proc Kendall Award Symp, p 151Google Scholar
  34. 34.
    Wu S (1974) J Macromol Sci, Rev Macromol Chem C6: 85Google Scholar
  35. 35.
    Mittal KL, Anderson HR (1991) Acid-base interactions: relevance to adhesion science and technology. VSP, UtrechtGoogle Scholar
  36. 36.
    Fowkes FM (1981) In: Mittal KL (ed) Physicochemical aspects of polymer surfaces. Plenum, New York, p 583Google Scholar
  37. 37.
    Fowkes FM (1991) In: Mittal KL, Anderson HR (eds) Acid-base interactions: relevance to adhesion science and technology. VSP, Utrecht, p 93Google Scholar
  38. 38.
    Drago RS, Vogel GC, Needham TE (1971) J Am Chem Soc 93: 6014CrossRefGoogle Scholar
  39. 39.
    Gutmann V (1978) The donor-acceptor approach to molecular interactions. Plenum, New YorkGoogle Scholar
  40. 40.
    Mittal KL (1977) Polym Eng Sci 17:467CrossRefGoogle Scholar
  41. 41.
    Pukánszky B, Vörös G (1996) Polym Compos 17: 384CrossRefGoogle Scholar
  42. 42.
    Fox HW, Hare EF, Zismann WA (1955) J Phys Chem 59: 1097CrossRefGoogle Scholar
  43. 43.
    Yue CY, Cheung WL (1991) J Mater Sci 26: 870Google Scholar
  44. 44.
    Vollenberg PHT, Heikens D (1989) Polymer 30: 1656CrossRefGoogle Scholar
  45. 45.
    Stamhuis JE, Loppé JPA (1982) Rheol Acta 21: 103CrossRefGoogle Scholar
  46. 46.
    Sumita M, Tsukini H, Miyasaka K, Ishikawa K (1984) J Appl Polym Sci 29: 1523CrossRefGoogle Scholar
  47. 47.
    Zorll U (1977) Gummi, Asbest, Kunstst 30:436Google Scholar
  48. 48.
    Folkes MJ, Wong WK (1987) Polymer 28: 1309CrossRefGoogle Scholar
  49. 49.
    Akay G (1990) Polym Eng Sci 30:1361CrossRefGoogle Scholar
  50. 50.
    Maurer FHJ, Kosfeld R, Uhlenbroich T (1985) Colloid Polym Sci 263: 624CrossRefGoogle Scholar
  51. 51.
    Maurer FHJ, Kosfeld R, Uhlenbroich T, Bosveliev LG (1981) 27th Intl. Symp. on Macromolecules, 6–9 July, Strasbourg, FranceGoogle Scholar
  52. 52.
    Mansfield KF, Theodorou DN (1991) Macromolecules 24:4295CrossRefGoogle Scholar
  53. 53.
    Patel S, Hadziioannou G, Tirrell M (1986) In: Ishida H, Koenig JL (eds) Composite interfaces. Elsevier, New York, p 65Google Scholar
  54. 54.
    Jančář J (1991) J Mater Sci 26:4123CrossRefGoogle Scholar
  55. 55.
    Vollenberg PHT, Heikens D (1986) In: Ishida H, Koenig JL (eds) Composite interfaces. Elsevier, New York, p 171Google Scholar
  56. 56.
    Maiti SN, Mahapatro PK (1991) J Appl Polym Sci 42: 3101CrossRefGoogle Scholar
  57. 57.
    Vörös G, Pukánszky B (1995) J Mater Sci 30:4171CrossRefGoogle Scholar
  58. 58.
    Maurer FHJ, Schoffeleers HM, Kosfeld R, Uhlenbroich T (1982) In: Hayashi T, Kawata K, Umekawa S (eds) Progress in science and engineering of composites. ICCM-IV, Tokyo, p 803Google Scholar
  59. 59.
    Pukánszky B, Fekete E, Tüdös F (1989) Makromol Chem, Macromol Symp 28:165Google Scholar
  60. 60.
    Iisaka K, Shibayama K (1978) J Appl Polym Sci 22: 3135CrossRefGoogle Scholar
  61. 61.
    Pukánszky B, Tüdös F (1990) In: Ishida H (ed) Controlled interphases in composite materials. Elsevier, New York, p 691Google Scholar
  62. 62.
    Kolařík J, Hudeček S, Lednický F (1978) Faserforsch Textiltechn 29: 51Google Scholar
  63. 63.
    Kolařík J, Hudeček S, Lednický F, Nicolais L (1979) J Appl Polym Sci 23:1553CrossRefGoogle Scholar
  64. 64.
    Pukánszky B (1992) New Polym Mater 3: 205Google Scholar
  65. 65.
    Ishida H, Koenig JL (1980) J Polym Sci, Polym Phys 18: 1931CrossRefGoogle Scholar
  66. 66.
    Briggs D, Seah MP (1990) Practical surface analysis, vol 1, Auger and X-ray photoelectron spectroscopy. Wiley, ChichesterGoogle Scholar
  67. 67.
    Briggs D, Seah MP (1992) Practical surface analysis, vol 2, Ion and neutral spectrocopy. Wiley, ChichesterGoogle Scholar
  68. 68.
    Banwell CN (1972) Fundamentals of molecular spectroscopy. McGraw Hill, New YorkGoogle Scholar
  69. 69.
    Briggs D, Brown A, Vickerman JC (1989) Handbook of static secondary ion mass spectrometry. Wiley, ChichesterGoogle Scholar
  70. 70.
    Ashton DP, Briggs D (1995) in Ref 15, p 89Google Scholar
  71. 71.
    Eltekova NA (1995) Proc Eurofillers’ 91, p 285Google Scholar
  72. 72.
    Delon JF, Yvon J, Michot L, Villieras F, Dases JM (1995) Proc Eurofillers’ 95, p 17Google Scholar
  73. 73.
    Balard H, Papirer E (1993) Progr Surface Coatings 22:1CrossRefGoogle Scholar
  74. 74.
    Fekete E, Pukánszky B, Tóth A, Bertóti I (1990) J Colloid Interface Sci 135: 200CrossRefGoogle Scholar
  75. 75.
    Panzer U, Schreiber HP (1992) Macromolecules 25:3633CrossRefGoogle Scholar
  76. 76.
    Bonnerup C, Gatenholm P (1993) J Adhesion Sci Technol 7: 247CrossRefGoogle Scholar
  77. 77.
    Rothon RN (1995) in Ref 15, p 123Google Scholar
  78. 78.
    Jančář J, Kučera J (1990) Polym Eng Sci 30: 707CrossRefGoogle Scholar
  79. 79.
    Jančář J (1989) J Mater Sci 24: 3947CrossRefGoogle Scholar
  80. 80.
    Marosi G, Bertalan G, Rusznák I, Anna P (1986) Colloids Surf 23:185CrossRefGoogle Scholar
  81. 81.
    Bajaj P, Jha NK, Jha RK (1989) Polym Eng Sci 29: 557CrossRefGoogle Scholar
  82. 82.
    Bajaj P, Jha NK, Jha RK (1989) Br Polym J 21: 345CrossRefGoogle Scholar
  83. 83.
    Raj RG, Kokta BV, Dembele F, Sanschagrin B (1989) J Appl Polym Sci 38: 1987CrossRefGoogle Scholar
  84. 84.
    Papirer E, Schultz J, Turchi C (1984) Eur Polym J 12: 1155CrossRefGoogle Scholar
  85. 85.
    Allard RC, Vu-Khanh T, Chalifoux JP (1989) Polym Compos 10: 62CrossRefGoogle Scholar
  86. 86.
    Bramuzzo M, Savadori A, Bacci D (1985) Polym. Compos. 6:1CrossRefGoogle Scholar
  87. 87.
    Pukánszky B, Maurer FHJ (1995) Polymer 36: 1617CrossRefGoogle Scholar
  88. 88.
    Plueddemann EP (1982) Silane coupling agents, Plenum, New YorkGoogle Scholar
  89. 89.
    Trotignon JP, Verdu J, De Boissard R, De Vallois A (1986) In: Sedláček B (ed) Polymer Composites. Walter de Gruyter, Berlin, p 191Google Scholar
  90. 90.
    Matienzo LJ, Shah TK (1986) Surf Interface Anal 8: 53CrossRefGoogle Scholar
  91. 91.
    Vollenberg PHT, Heikens D (1990) J Mater Sci 25: 3089CrossRefGoogle Scholar
  92. 92.
    Raj RG, Kokta BV, Daneault C (1989) Int J Polym Mater 12: 239CrossRefGoogle Scholar
  93. 93.
    Mäder E, Freitag KH (1990) Composites 21: 397CrossRefGoogle Scholar
  94. 94.
    Ishida H, Miller JD (1984) Macromolecules 17: 1659CrossRefGoogle Scholar
  95. 95.
    Ishida H (1985) In: Ishida H, Kumar G (eds) Molecular characterization of composite interfaces. PlenumGoogle Scholar
  96. 96.
    Demjén Z, Pukánszky B, Földes E, Nagy J (1997) J Interface Colloid Sci 194: 269CrossRefGoogle Scholar
  97. 97.
    Sadler EJ, Vecere AC (1995) Plast Rubber Process Appl 24:271Google Scholar
  98. 98.
    Zolotnitsky M, Steinmetz JR (1995) J Vinyl Additive Technol 1: 109CrossRefGoogle Scholar
  99. 99.
    Widmann B, Fritz HG, Oggermüller H (1992) Kunststoffe 82: 1185Google Scholar
  100. 100.
    Demjén Z, Pukánszky B, Nagy J Jr (1997) Possible coupling reactions of functional silanes and polypropylene, accepted in PolymerGoogle Scholar
  101. 101.
    Takase S, Shiraishi N (1989) J Appl Polym Sci 37: 645CrossRefGoogle Scholar
  102. 102.
    Jančář J, Kummer M, Kolařík J (1988) In: Ishida H (ed) Interfaces in polymer, ceramic, and metal matrix composites. Elsevier, New York, p 705Google Scholar
  103. 103.
    Felix JM, Gatenholm P (1991) J Appl Polym Sci 50:699CrossRefGoogle Scholar
  104. 104.
    Kelnar I (1991) Angew Makromol Chem 189:207CrossRefGoogle Scholar
  105. 105.
    Chiang WY, Yang WD (1988) J Appl Polym Sci 35: 807CrossRefGoogle Scholar
  106. 106.
    Jančář J,K učera J (1990) Polym Eng Sci 30: 714CrossRefGoogle Scholar
  107. 107.
    Karger-Kocsis J, Kalló A, Kuleznev VN (1984) Polymer 25: 279CrossRefGoogle Scholar
  108. 108.
    Lee YD, Lu CC (1982) J Chin Inst Chem Eng 13: 1Google Scholar
  109. 109.
    Kolařík J, Lednický F (1986) In: Sedláèek B (ed) Polymer composites. Walter de Gruyter, Berlin, p 537Google Scholar
  110. 110.
    Stamhuis JE (1988) Polym Compos 9: 280CrossRefGoogle Scholar
  111. 111.
    Gupta AK, Kumar PK, Ratnam BK (1991) J Appl Polym Sci 42: 2595CrossRefGoogle Scholar
  112. 112.
    Serafimov B (1986) Plaste Kautsch 33: 331Google Scholar
  113. 113.
    Faulkner DL (1988) J Appl Polym Sci 36:467CrossRefGoogle Scholar
  114. 114.
    Kolařík J, Lednický F, Pukánszky B (1987) In: Matthews FL, Buskell NCR, Hodgkinson JM, Morton J (eds) Proc 6th ICCM/2nd ECCM. Elsevier, London, vol 1, p 452Google Scholar
  115. 115.
    Pukánszky B, Tüdös F, Kolařík J, Lednický F (1990) Polym Compos 11: 98CrossRefGoogle Scholar
  116. 116.
    Chiang WY, Yang WD, Pukánszky B (1992) Polym Eng Sci 32: 641CrossRefGoogle Scholar
  117. 117.
    Kolařík J, Lednický F, Jančář J, Pukánszky B (1990) Polym Commun 31: 201Google Scholar
  118. 118.
    Turcsányi B, Pukánszky B, Tüdós F (1988) J Mater Sci Lett 7: 160CrossRefGoogle Scholar
  119. 119.
    Michler GH, Tovmasjan JM Plaste Kautsch (1988) 35: 73Google Scholar
  120. 120.
    Liauw CM, Lees GC, Hurst SJ, Rothon RN, Dobson DC (1995) Plast Rubber Compos Process Appl 24: 211Google Scholar
  121. 121.
    Liauw CM, Lees GC, Hurst SJ, Rothon RN, Dobson DC (1995) Plast Rubber Compos Process Appl 24: 249Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 1999

Authors and Affiliations

  • Béla Pukánszky
    • 1
  • Erika Fekete
    • 2
  1. 1.Department of Plastics and Rubber TechnologyTechnical University of BudapestBudapestHungary
  2. 2.Central Research Institute for ChemistryHungarian Academy of SciencesBudapestHungary

Personalised recommendations