Abstract
Minimally invasive surgery helps patients by accelerating postoperative recovery. However, its application is impeded because it is necessary for the surgeons performing such surgery to possess surgical skills of a high order. Thus, for laparoscopic surgery, a master slave combined manipulator (MCM) has been proposed that enhances the surgeon’s skill. The master grip and the slave hand with wrist joints are combined through the manipulator body, and a surgeon can perform the operation near to the patient. The slave hand is controlled by the master grip electrically and its position is directly controlled by the surgeon. The prototype model of the MCM has been developed and the function of the MCM has been verified by basic evaluation tests, and the MCM has been applied in an animal experiment. This paper describes the basic performance of the MCM.
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
A.J. Madhani, G. Niemeyer, J.K. Salisbury: The Black Falcon: A Teleoperated Surgical Instrument for Minimally Invasive Surgery, Proc. 1998 IEEE/RSJ Int. Conf. IROS (1998) 936–944
K. Ikuta, M. Nokata, S. Aritomi: Hyper Redundant Active Endoscope for Minimally Invasive Surgery, Journal of Robotics Society of Japan, Vol. 16, no. 4 (1998) 569–575 (in Japanese)
M.C. Cavusoglu, F. Tendick, M. Cohn, S.S. Sastry: A Laparoscopic Telesurgical Workstation, IEEE Trans. Robotics and Automation, Vol. 15, No. 4 (1999) 728–739
M. Mitsuishi, S. Tomisaki, T. Yoshidome, H. Hashizume, K. Fujiwara: Tele-micro-surgery system with intelligent user interface, Proc. IEEE Int. Conf. on Robotics and Automation, vol. 2 (2000) 1607–1614
H. Kazerooni, Human/robot interaction via transfer of power and information signals Part I: Dynamics and Control analysis, Proc. IEEE Int. Conf on Robotics and Automation (1989) 1632–1640
M.O. Schurr: Robotic Devices for Advanced Endoscopic Surgical Procedures: An Overview, Journal of Robotics Society of Japan, Vol. 18, No. 1 (2000) 16–19
R. Kumar, P. Berkelman, P. Gupta, A. Barnes, P. Jensen, L.L. Whitcomb, R.H. Taylor: Preliminary Experiments in Cooperative Human/Robot Force Control for Robot Assisted Micro-surgical Manipulation, Proc. IEEE Int. Conf. on Robotics and Automation (2000) 610–617
R. Nakamura, T. Oura, E. Kobayashi, I. Sakuma, T. Dohi, N. Yahagi, T. Tsuji, D. Hashimoto, M. Shimada, M. Hashizume: Multi-DOF Forceps Manipulator System for Laparoscopic Surgery-Mechanismminiaturized & Evaluation of New Interface-, Proc. 4th MIC-CAI2001 (2001) 606–613
S. Shimachi, Y. Hakozaki, A. Oguni, A. Hashimato: Weld Knotting and Contact Force Sensing for Laparoscoppic Surgery, Proc. 18th Annual Conf. of the Robotics Society of Japan (2000) 849–850 (in Japanese)
N. Matsuhira, H. Hashimoto, M. Jinno, T. Miyagawa, K. Nambu, Y. Morikawa, T. Furukawa, M. Kitajima, K. Nakazawa: Development of a Manipulator for Laparoscopic Surgery-Conceptual model of master slave combined manipulator and its evaluation-, Proc. 32nd ISR (2001) 630–635
N. Matsuhira, H. Bamba and M. Asakura: The development of a general master arm for teleoperation considering its role as a man-machine interface, Advanced Robotics, Vol. 8, No. 4 (1994) 443–457
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Jinno, M. et al. (2002). Development of a Master Slave Combined Manipulator for Laparoscopic Surgery. In: Dohi, T., Kikinis, R. (eds) Medical Image Computing and Computer-Assisted Intervention — MICCAI 2002. MICCAI 2002. Lecture Notes in Computer Science, vol 2488. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-45786-0_7
Download citation
DOI: https://doi.org/10.1007/3-540-45786-0_7
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-44224-0
Online ISBN: 978-3-540-45786-2
eBook Packages: Springer Book Archive