Abstract
In order to predict tool state, this paper introduces the application of feature extraction and feature selection by automatic relevance determination (ARD) to explore the optimal feature set of AE signals in tool condition monitoring system(TCMS). The experiment results confirm that this selected AE feature set is more effective and efficient to recognize tool state over various cutting conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Sata, T., Matsushima, K., Nagakura, T. and Kono: Learning and Recogintion of the Cutting States by Spectrum Analysis, Annals of CIRP, Vol. 22, 41–45, 1973.
Choi, D., Kwon, W.T. and Chu, C.N.: Real-time Monitoring of Tool Fracture in Turning using Sensor Fusion, International Journal of Advanced Manufacturing Technology 15 (5), 305–310, 1999
Jemielniak, K., Otman, O.: Tool Failure Detection Based on Analysis of Accoustic Emission Signals, Journal of Material Processing Technology 76, pp.192–197, 1998
Kakade, S., Vijayaraghavan, L., Krishnamurthy, R.: In-process Tool Wear and Chip-form Monitoring in Face Milling Operation Using Acoustic Emission, Journal of Material Processing Technology, 44, pp. 207–214, 1994.
Zheng, S.X. et al.: Intrinsic Optical Fiber Sensor for Monitoring Acoustic Emission, Sensors and Actuators, A: Physical Vol. 31, 110–114,1992.
Konig, W., Kutzner K., Schehl U.: Tool Monitoring of Small Drills with Acoustic Emission, International Journal of Machine Tools and Manufacture Vol. 32, No.(4,) 487–493, 1992.
Moriwaki, T., Tobito, M.: A New Approach to Automatic Detection of Life of Coated Tool Based on Acoustic Emission Measurement, ASME Trans. Journal of Engineering for Industry 112 (3), 212–218, 1990.
Roget, J., Souquet, P., Gsib, N.: Application of Acoustic Emission to The Automatic Monitoring of Tool Condition During Machining, ASNDT Materials Evaluation Vol.46, 225–229, 1988
Dornfeld, D.A.: Application of Acoustic Emission Techniques in Manufacturing, NDT and International Vol. 25, No. 6, 259–269,1992.
Blum, T., Inasaki, I.: A Study on Acoustic Emission from the Orthogonal Cutting Process, ASME Trans. Journal of Engineering for Industry 112 (3) (1990) 203–211.
Lister: P.M. On-line Measurement of Tool Wear. Ph.D. thesis, Manufacturing and Machine Tools Division, Department of Mechanical Engineering, UMIST, Manchester, UK, 1993.
Y.M. Niu et al.: “An intelligent Sensor System Approach for Reliable tool flank wear recognition”, Advanced Manufacturing Technology, Vol.14, (1998), pp.77–84.
Xu Xin: Development On-line Tool Condition Monitoring System, Thesis for Master Degree, National University of Singapore, 2001.
Jebara, T. and T. Jaakkola: Feature Selection and Dualities in Maximum Entropy Discrimination, In UAI-2000: Proc. of the 16th Conference on Uncertainty in Artificial Intelligence, (2000), Stanford University, Stanford, CA, USA.
Weston, J., S. Mukherjee, O. Chapelle, M. Pontil, T. Poggio and V.N. Vapnik: Feature Selection for SVMs, In NIPS-13: Advances in Neural Information Processing Systems, Vol. 13, (2001), Denver, Colorado.
MacKay DJC: A practical Bayesian framework for back-propagation networks, Neural Computation, (1992), Vol.4, No.3, pp.448–472.
R.M. Neal: Bayesian Learning for Neural Networks Lecture Notes in Statistics, Springer, 1996.
Bishop, C.M.: Neural Networks for Pattern Recognition, Oxford University Press, 1995
Chenoweth, T. and Z. Obradovic: An Explicit Feature Selection Strategy for Predictive Models of the S&P 500 Index, Neurovest Journal, Vol. 3, No. 6, pp. 14–21. 1995
Steppe, J.M. and Jr.K.W. Bauer: Improved Feature Screening in Feed-Forward Neural Networks, Neurocomputing, Vol. 13, pp. 47–58. 1996.
Cao, L. J.: Support Vector Machines Based Methods for Time Series Forecasting, Thesis for PhD Degree, National University of Singapore, 2001.
B. Sick: Tool Wear Monitoring in Turning: A Neural Network Application, Measurement + Control; Vol. 34, No. 7, (2001), pp. 207–222, The Institute of Measurement and Control, London.
R. Du, M. A. Elbestawi & S. M. Wu: Automated Monitoring of Manufacturing Processes: Part 1, Monitoring Decision-Making Methods, Trans. of ASME, J. of Eng. for Industry, Vol. 117, No. 2, (1995), pp. 121–132.
Platt, John C. Sequential Minimal Optimization: A Fast Algorithm for Training Support Vector Machines. Technical Report MSR-TR-98-14, Microsoft Research, 1998.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Jie, S., Hong, G., Rahman, M., Wong, Y. (2002). Feature Extraction and Selection in Tool Condition Monitoring System. In: McKay, B., Slaney, J. (eds) AI 2002: Advances in Artificial Intelligence. AI 2002. Lecture Notes in Computer Science(), vol 2557. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-36187-1_43
Download citation
DOI: https://doi.org/10.1007/3-540-36187-1_43
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-00197-3
Online ISBN: 978-3-540-36187-9
eBook Packages: Springer Book Archive