Abstract
This work deals with some numerical and experimental results on the plating of Reinforced Concrete (RC) beams externally strengthened with FRP laminates. In particular, they concern the tangential interaction distributions along the reinforced boundaries of the strengthened beams. The comparisons between numerical and experimental results show the accuracy of the proposed mechanical model in evaluating the stresses distributions at the interface between concrete core and composite laminates.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Swamy R. N., Jones R., Bloxham J. W. (1987) Structural Behaviour of Reinforced Concrete Beams Strengthened by Epoxy Bonded Steel Plates. The Structural Engineer, 65(2), 59–68.
Jones R., Swamy R. N., Charif A. (1988) Plate Separation and Anchorage of Reinforced Concrete Beams Strengthened by Epoxy-Bonded Steel Plates. The Structural Engineer, 66(5/1), 85–94.
Swamy R. N., et al. (1989) The Effect of External Plate Reinforcement on the Strengthening of Structurally Damaged RC Beams. The Structural Engineer, 67(3/7), 45–54.
Roberts T. M. (1990) Approximate Analysis of Shear and Normal Stress Concentrations in the Adhesive Layer of Plated RC Beams. The Structural Engineer, 67(12/20), 37–46.
Quantrill R. J., et al. (1996) Experimental and Analytical Investigation of FRP Strengthened Beam Response: Part I. Magazine of Concrete Research, 48(177), 331–341.
Quantrill R. J., et al. (1996) Predictions of Maximum Plate End Stresses of FRP Strengthened Beams: Part II. Magazine of Concrete Research, 48(177), 343–351.
Malek A.A., Saadatmanesh H., Ehsani M.R. (1996) Shear and Normal Stress Concentrations in RC Beams Strengthened with FRP Plates. Second International Conference on Advanced Composite Materials in Bridges and Structures, Montral, Qubec, Canada, 629–638.
Arduini M., Di Tommaso A., Manfroni O. (1995) Fracture Mechanisms of Concrete Beams Bonded with Composite Plates. Second International Symposium on: Non-Metallic Reinforcement for Concrete Structures FRPRCS-2, Ghent, 483–531.
Arduini M., Di Tommaso A., Manfroni O., Nanni A. (1996) Failure Mechanisms of Concrete Beams Reinforced with FRP Flexible Sheets. Second International Conference on Advanced Composite Materials in Bridges and Structures, Montral, Qubec, Canada, 253–260.
Ascione L., Fraternali F. (1990) On the Mechanical Behaviour of Curved Composite Beams: A Simple Model which Takes into Account the Warping Effects. Rendiconti dell’Accademia Nazionale dei Lincei, IX(I), 223–233.
Ascione L., Bilotti G., Fraternali F. (1991) Sul Calcolo delle Tensioni Interlaminari in Travi Curve Composite. XX AIAS National Conference, Palermo, 441–451.
Ascione L., Fraternali F. (1992) A Penalty Model for the Analysis of Composite Curved Beams. Computers & Structures, 45(5/6), 985–999.
Ascione L., Feo L., Fraternali F. (1997) The Wrapping of Reinforced Concrete Beams with FRP Plates: A Mechanical Model. Advancing with Composites’ 97, Milano, 155–170.
Feo L., D’Agostino G., Tartaglione D. (1997) Sul Comportamento Meccanico di Travi Rinforzate con Placche in FRP: uno Studio Numerico. XXVI AIAS National Conference, Catania, 511–518.
Feo L., D’Agostino G., Tartaglione D. (1998) On the Statical Behaviour of Reinforced Concrete Beams Wrapped with FRP Plates: an Experimental Investigation. ECCM-8, European Conference On Composite Materials, Napoli, 2, 189–196.
Ascione L., Feo L., Fraternali F. (1998) Stress Analysis of Reinforced Concrete Bemas Wrapped with FRP Plates. ECCM-8, European Conference On Composite Materials, Napoli, 2, 197–204.
Ascione L., Feo L., D’Agostino G., Tartaglione D. (1998) Sul Rinforzo di Travi in Conglomerato Cementizio Armato Mediante Placche in FRP: Alcuni Confronti Teorico-Sperimentali. XXVII AIAS National Conference, Perugia, 101–113.
Ascione L., Feo L. (2000) Modeling of Composite/Concrete Interface of R/C Beams Strengthened with Composite Laminates. Composites Part B, 31(6/7), 535–540.
Ascione L., Feo L., Mancusi G. (2000) On the Statical Behaviour of FRP Thin-Walled Beams. Composites Part B, 31(8), 643–654.
Ascione L., Feo L. (2000) On the Plating of Reinforced Concrete Beams with FRP: a Numerical Simulation. ECCOMAS 2000, Barcellona.
Ascione L., Feo L. (2000) Interaction Stresses in Reinforced Concrete Beams Strengthened with FRP plates. Advancing with Composites 2000, Milano, 259–268.
Ascione L., Feo L. (2000) Disuniformit e concentrazioni tensionali all’interfaccia nelle strutture placcate: modellazione strutturale e confronti sperimentali. XXIX AIAS National Conference, Lucca, 709–720.
Feo L., Rapuano S. (2000) Un Sistema di Misura per il Rilievo delle Tensioni Interlaminari nelle Strutture Placcate con FRP. XXIX AIAS National Conference, Lucca, 759–768.
Ascione L., Berardi V.P., Feo L., Mancusi G. (2001) Il calcolo delle interazioni nel placcaggio di strutture in c.a. mediante lamine in FRP. XV AIMETA National Congress, Taormina.
Ascione L., Feo L., Berardi V.P. (2001) Analisi numerico-sperimentale di strutture in c.a. placcate con lamine di materiale composito. XXX AIAS National Conference, Alghero.
Ascione L., Feo L., Mancusi G. (2001) Progetto di rinforzi in FRP per strutture in conglomerato cementizio armato. Convegno Nazionale Crolli e Affidabilit delle Strutture Civili, Venezia, 517–533.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ascione, L., Berardi, V.P., Di Nardo, E., Feo, L., Mancusi, G. (2005). An Experimental and Numerical Investigation on the Plating of Reinforced Concrete Beams with FRP Laminates. In: Frémond, M., Maceri, F. (eds) Mechanical Modelling and Computational Issues in Civil Engineering. Lecture Notes in Applied and Computational Mechanics, vol 23. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-32399-6_16
Download citation
DOI: https://doi.org/10.1007/3-540-32399-6_16
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-25567-3
Online ISBN: 978-3-540-32399-0
eBook Packages: EngineeringEngineering (R0)