This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
M. Mayer, “Microelectronic Bonding Process Monitoring by Integrated Sensors,” Ph.D. Thesis, No. 13685, ETH Zurich, Zurich, 2000.
R. van Gestel, “Reliability Related Research on Plastic IC-Packages: A Test Chip Approach,” Ph.D. Thesis, Delft University Press, 1993.
J.N. Sweet, “Integrated Test Chips Improve IC Assembly” IEEE Circuits and Devices Magazine, 6, pp. 39–45, 1990.
S. J. Ham, S. B. Lee, “Measurement of Creep and Relaxation Behaviors of Wafer-Level CSP Assembly Using Moiré Interferometry,” Transactions of the ASME, 125, pp. 282–288, 2003.
D. A. Bittle, J. C. Suhling, R. E. Beaty, R. C. Jaeger, R. W. Johnson, “Piezoresistive Stress Sensors for Structural Analysis of Electronic Packages,” Journal of Electronic Packaging, 113, pp. 203–215, 1991.
J. F. Creemer, “The Effect of Mechanical Stress on Bipolar Transistor Characteristics,” Ph.D. Thesis, Techn. Univ. Delft, Delft, 2002.
A. T. Bradley, R. C. Jaeger, J. C. Suhling, K. J. O’Connor, “Piezoresistive Characteristics of Short-Channel MOSFETs on (100) Silicon,” IEEE Trans. on Electron Devices, 48, No. 9, pp. 2009–2015, 2001.
M. Doelle, P. Ruther, O. Paul, “A Novel Stress Sensor Based on the Transverse Pseudo-Hall Effect of MOSFETS,” IEEE 16th Annual International Conference on MEMS, pp. 490–493, 2003.
Y. Zou, J. C. Suhling, R. C. Jaeger, S. T. Lin, J. T. Benoit, R. R. Grzybowski, “Die Surface Stress Variation During Thermal Cycling and Thermal Aging Reliability Tests,” 49th Electronic Components and Technology Conference, pp. 1249–1260, 1999.
Y. Zou, J. C. Suhling, R. W. Johnson, R. C. Jaeger, A. K. M. Mian, “In-situ Stress State Measurements During Chip-on-Board Assembly,” IEEE Transactions on Electronics Packaging Manufacturing, 22, No. 1, pp. 38–52, 1999.
P. Palaniappan, D. F. Baldwin, “In Process Stress Analysis of Flip-Chip Assemblies During Underfill Cure,” Microelectronics Reliability, 40, pp. 1181–1190, 2000.
J. Zhang, H. Ding, D. F. Baldwin, I. C. Ume, “Characterization of In-Process Substrate Warpage of Underfilled Flip Chip Assembly,” IEEE/CPMT/SEMI 28th Int’1 Electronics Manufacturing Technology Symposium, pp. 291–297, 2003.
M. Mayer, J. Schwizer, O. Paul, H. Baltes, “In-situ Ultrasonic Stress Measurement During Ball Bonding using Integrated Piezoresistive Microsensors,” Proc. Intersociety Electron. Pack. Conf. (InterPACK99), pp. 973–978, 1999.
D. Manic, A. P. Friedrich, Y. Haddab, R. S. Popovic, “Influence of Assembly Procedure on IC Parameters,” Proc. 21st International Conference on Microelectronics, 2, pp. 637–640, 1997.
M. Doelle, C. Peters, P. Gieschke, P. Ruther, O. Paul, “Two-Dimensional High Density Piezo-FET Stress Sensor Arrays for In-Situ Monitoring of Wire Bonding Processes,” Proc. 17th IEEE International Conference on Micro Electro Mechanical Systems (MEMS’04), pp. 829–832, 2004.
M. Hizukuri, Y. Wada, N. Watanabe, T. Asano, “Real Time Measurement of the Strain Generated on Substrate during Ultrasonic Flip Chip Bonding,” 6th Symposium on Microjoining and Assembly Technology in Electronics, 3-4 February, Yokohama, pp. 169–174, 2000.
M. Hizukuri, T. Asano, “Measurement of Dynamic Strain During Ultrasonic Au Bump Formation on Si Chip,” Japanese Journal of Applied Physics, Part 1 (Regular Papers, Short Notes & Review Papers), 39, No. 4B, pp. 2478–2482, 2000.
M. Mayer, Z. Stoessel, D. Bolliger, O. Paul, “Process and Chip for Calibrating a Wire Bonder,” EP patent application publication No. 0953398A1, November 3, 1999.
G. Harman, “Wire Bonding in Microelectronics,” 2nd Ed., McGraw Hill, New York, 1997.
M. Barp, D. Vischer, “Achieving a World Record in Ultra High Speed Wire Bonding through Novel Technology,” Proc. Semicon West’02, 2002.
N. Onda, Z. Stössel, A. Dommann, J. Ramm, “DC-Hydrogen Plasma Cleaning: A Novel Process for IC-Packaging,” Proc. Semicon/Package Materials, pp. D1–D10, 1997.
D. S. Liu, Y. C. Chao, C. H. Wang, “Study of Wire Bonding Looping Formation in the Electronic Packaging Process Using the Three-Dimensional Finite Element Method,” Finite Elements in Alanlysis and Design, 40, pp. 263–286, 2004.
ASTM Standard No. F1269-89, “Test Methods of Destructive Shear Testing of Ball Bonds,” 1990.
F. Farassat, “Wire Bonding Ultrasonic Control System Responsive to Wire Deformation,” US patent application publication No. 5314105, May 24, 1994.
F. Farassat, “Entwicklung und Erprobung eines Regelsystems zur Verbesserung der Verbindungsqualität beim Ultraschallbonden,” (in German), Ph.D. Thesis, Technical University Berlin, Berlin, 1997.
A. Carrass, V. P. Jaecklin, “Analytical Methods to Characterize the Interconnection Quality of Gold Ball Bonds,” 2nd European Conference on Electronic Packaging Technology (EuPac’ 96), DVS Berichte, 173, pp. 135–139, 1996.
R. Pufall, “Automatic Process Control of Wire Bonding,” Proc. Electronic Components & Technology Conference, 43, pp. 159–162, 1993.
J. H. Cusick, A. E. Brown, A. S. Hamamoto, J. L. S. Bellin, “Ultrasonic Bond Monitor,” US patent application publication No. 3890831, June 24, 1975.
K. U. von Raben, “Controlling Relevant Bonding Parameters of Modern Bonders,” Proc. Electronic Components Conference, 38, pp. 558–563, 1988.
S. W. Or, H. L. W. Chan, V. C. Lo, C. W. Yuen, “Ultrasonic Wire-Bond Quality Monitoring Using Piezoelectric Sensor,” Sensors and Actuators, A65, pp. 69–75, 1998.
W. L. Loofbourrow, “Capacitive Microphone Tuning of Ultrasonic/Thermosonic Bonders,” Proc. Semiconductor Processing, pp. 472–484, 1984.
K. D. Lang, F. Osterwald, B. Schilde, H. Reichl, “Measurement of Ultrasonic Behavior During Wire Bonding-a Contribution to Quality Assurance in Chip on Board Technology,” Proc. Semicon West’ 98, pp. F1–F9, 1998.
A. Schneuwly, P. Gröning, L. Schlapbach, G. Müller, “Bondability Analysis of Bond Pads by Thermoelectric Temperature Measurements,” Journal of Electronic Materials, 27, No. 11, pp. 1254–1261, 1998.
M. Mayer, O. Paul, D. Bolliger, H. Baltes, “Integrated Temperature Microsensors for Characterization and Optimization of Thermosonic Ball Bonding Process,” Proc. Electronic Components and Technology Conference, pp. 463–468, 1999.
O. E. Gibson, “Bond Signature Analyzer,” US patent application publication 4998664, March 12, 1991.
J. Chen, “Real-Time Ultrasonic Testing of Quality of Wire Bonding,” Insight Non-Destructive Testing and Condition Monitoring, 44, No. 7, pp. 443–445, 2002.
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2005). Introduction. In: Force Sensors for Microelectronic Packaging Applications. Microtechnology and MEMS. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-26945-2_1
Download citation
DOI: https://doi.org/10.1007/3-540-26945-2_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-22187-6
Online ISBN: 978-3-540-26945-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)