Abstract
This chapter presents several applications of various parameter identification methods to practical engineering problems. The focus is here on novel industrial uses of inverse analyses as integrations of experimental and computational mechanics and on the potential benefits which derive, or may reasonably be expected in the near future. The parameter identification problems discussed herein with some details from the above standpoint concern the following topics: micro and nano-indentation tests supplemented by the imprint mapping; local properties in heterogeneous materials assessed on the basis of conventional overall tests. Four other practical problems solved by inverse analysis are more concisely presented subsequently and some new methodological features are pointed out.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Abaqus, 2003. Release 6.3. Theory and User’s manuals. Hibbit, Karlsson and Sorensen Inc., Pawtucket, RI, USA.
Ahmed, T., Burley, E., Rigden, S., Abu-Tair, A., 2003. The effect of alkali reactivity on the mechanical properties of concrete. Constr. Build. Mater. 17, 123–144.
Anderson, T., 2003. An Introduction to Multivariate Statistical Analysis. John Wiley & Sons, New York (3rd Edition).
Anthoine, A., 1995. Derivation of the in-plane elastic characteristics of masonry through homogenization theory. Int. J. Solids Struct. 32(2), 137–163.
Ardito, R., Bartolotta, P., Ceriani, L., Maier, G., 2003. Diagnostic inverse analysis of concrete dams with statical excitation. In: Proc. of the V Euromech Solid Mechanics Conference ESMC5, Salonicco (Greece), available at the IALAD web-site: http://nw-ialad.uibk.ac.at/.
Bates, D., Watts, D., 1988. Nonlinear Regression Analysis and its Applications. John Wiley & Sons, New York.
Bažant, Z., Guo, Z., 2002. Size-effect and asymptotic matching approximations in strain-gradient theories of micro-scale plasticity. Int. J. Solids Struct. 39(21–22), 5633–5657.
Bažant, Z., Planas, J., 1997. Fracture and Size-Effect in Concrete and Other Quasi-Brittle Materials. CRC Press, Boca Raton (USA).
Bazaraa, M., Sherali, H., Shetty, C, 1993. Nonlinear Programming. Theory and Algorithms. John Wiley & Sons, New York.
Belytschko, T., Liu, W., Moran, B., 2002. Nonlinear Finite Element for Continua and Structures. John Wiley & Sons Ltd., Baffins Lane (England).
Bhushan, B., 1999. Handbooh of micro/nano tribology. CRC Press, Boca Raton (USA).
Bicego, V., 2004. Small punch test method: results from a european creep testing round robin. In: 4th International Conference on Advances in Material Technology for Fossil Power Plants, Hilton Head Island (USA).
Bittanti, S., Maier, G., Nappi, A., 1984. Inverse problems in structural elasto-plasticity: a kalman filter approach. In: Sawczuk, A., Bianchi, G. (Eds.), Plasticity Today. CISM book, Elsevier Applied Science Publishers, London, pp. 311–329.
Bocciarelli, M., Bolzon, G., Maier, G., 2004a. Mechanical characterization of anisotropic materials by indentation test, imprint mapping and inverse analysis. In: 6th World Conference on Computational Mechanics WCCM VI, Beijing (China). Invited lecture.
Bocciarelli, M., Cocchetti, G., Maier, G., 2004b. Shakedown analysis of train wheels by fourier series and nonlinear programming. Eng. Struct. 26(4), 455–470.
Bocher, L., Delobelle, P., Robinet, P., Feaugas, X., 2001. Mechanical microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure. Int. J. Plasticity 17, 1491–1530.
Bolzon, G., Fedele, R., Maier, G., 2002a. Parameter identification of a cohesive crack model by kalman filter. Comp. Meth. Appl. Mech. Eng. 191, 2947–2871.
Bolzon, G., Ghilotti, D., Maier, G., 1997. Parameter identification of the cohesive crack model. In: Sol, H., Oomens, C. (Eds.), Material Identification Using Mixed Numerical Experimental Methods. Kluwer Academic Publishers, Dordrecht, pp. 213–222.
Bolzon, G., Ghilotti, D., Maier, G., 2002b. Strength of periodic elastic-brittle composites evaluated through homogenization and parameter identification. Eur. J. Mech.-A/Solids 21, 355–378.
Bolzon, G., Maier, G., Panico, M., 2004. Material model calibration by indentation, imprint mapping and inverse analysis. Int. J. Solids Struct. 41, 2957–2975.
Bower, A., Johnson, K., 1989. The influence of strain hardening on cumulative deformation in rolling and sliding contact. J. Mech. Physics Solids 37(4), 471–493.
Bruhns, O., Anding, D., 1999. On the simultaneous estimation of model parameters used in constitutive laws for inelastic material behaviour. Int. J. Plasticity 15, 1311–1340.
Brühwiler, E., Wittmann, F., 1990. The wedge splitting test, a new method of performing stable fracture mechanics tests. Eng. Fracture Mech. 35, 117–125.
Bui, H., 1994. Inverse Problems in the Mechanics of Materials: an Introduction. CRC Press, London.
Catlin, D., 1989. Estimation, Control and the Discrete Kalman Filter. Springer Verlag, Applied Mathematical Sciences, Berlin.
Chaboche, J., Rousselier, G., 1983. On the plastic and viscoplastic constitutive equations-part ii: Application of the internal variable concept to the 316 stainless steel. J. Press. Vess. Tech. ASME 105, 159–164.
Cividini, A., Maier, G., Nappi, A., 1983. Parameter estimation of a static geotechnical model using a bayes’ approach. Int. J. Rock Mech. Mining Sci. 20, 215–226.
Coleman, T., Li, Y., 1996. An interior trust region approach for nonlinear minimization subject to bounds. SIAM J. Opt. 6(2), 418–445.
Dao, N., Chollacoop, N., van Vliet, K., Venkatesh, T., Suresh, S., 2001. Computational modeling of the forward and reverse problem in instrumented sharp indentation. Acta Mater. 49, 3899–3918.
Delobelle, P., Robinet, P., Bocher, L., 1995. Experimental study and phenomenological modelization of ratchet under uniaxial and biaxial loading on an austenitic stainless steel. Int. J. Plasticity 11(4), 1491–1530.
Elmustafa, A., Stone, D., 2003. Nano-indentation and the indentation size-effect: Kinetics of deformation and strain gradient plasticity. J Mech. Phys. Solids 51(2), 357–381.
Fedele, R., Filippini, M., Maier, G., 2003. Constitutive model calibration for railway wheel steel through tension-torsion tests. Comp. Struct, (submitted for publication).
Fedele, R., Maier, G., Whelan, M., 2004. Calibration of local constitutive models through measurements at the macroscale in heterogeneous media. Int. J. Plasticity (submitted for publication).
Gioda, G., Maier, G., 1980. Direct search solution of an inverse problem in elasto-plasticity: identification of cohesion, friction angle and in situ stress by pressure tunnel tests. Int. J. Num. Meth. Eng. 15, 1823–1848.
Gu, Y., Nakamura, T., Prchlik, L., Sampath, S., Wallace, J., 2003. Micro-indentation and inverse analysis to characterize elastic-plastic graded materials. Mater. Sci. Eng. A 345, 223–233.
Guinea, G., Planas, J., Elices, M., 1992. Measurement of the fracture energy using three-point bend tests: Part 1-influence of experimental procedures. Mater. Struct. 25, 212–218.
Haykin, S., 1999. Neural Networks. A Comprehensive Foundation. 2nd edition, Prentice Hall, Upper Saddle River (USA).
Hill, R., 1948. A theory of yielding and plastic flow of anisotropic metals. Roy. Soc. London A193, 281–297.
Huber, N., Nix, W., Gao, H., 2002. Identification of elastic-plastic material parameters from pyramidal indentation of thin films. Math. Phys. and Eng. Sci. 458, 1593–1620.
Johnson, K., 1992. The application of shakedown principles in rolling and sliding contact. Eur. J. Mech.-A/Solids 11, 155–172.
Kailath, T., Sayed, A., Hassibi, B., 2000. Linear Estimation. Prentice Hall, London.
Kaliszky, S., 1990. Plasticity: Theory and Engineering Applications. Elsevier, Amsterdam.
Kleiber, M., Antunez, H., Hien, T., Kowalczyk, P., 1997. Parameter Sensitivity in Nonlinear Mechanics. Theory and Finite Element Computations. John Wiley & Sons, New York.
Kucharski, S., Mròz, Z., 2001. Identification of plastic hardening parameters of metals from spherical indentation. Mat. Sci. Eng. A 318, 65–76.
Mahnken, R., Stein, E., 1996. A unified approach for parameter identification of inelastic material models in the frame of the finite element method. Comp. Meth. Appl. Mech. Eng. 136, 225–258.
Maier, G., Ardito, R., Fedele, R., 2004. Inverse analysis problems in structural engineering of concrete dams. In: 6th World Conference of Computational Mechanics WCCM VI, Beijing (China). Invited semiplenary lecture.
Maier, G., Giannessi, F., Nappi, A., 1982. Indirect identification of yield limits by mathematical programming. J. Eng. Struct. 4, 86–98.
Matlab6.5, 2003. Optimization Toolbox Manual. The Math Works Inc.
McDowell, D., 1995. Stress-state dependence of cyclic ratchetting behaviour of two rail steels. Int. J. Plasticity 11(4), 397–421.
Michel, J., Moulinec, H., Suquet, P., 1999. Effective properties of composite materials with periodic microstructure: a computational approach. Comp. Meth. Appl. Mech. Eng. 172, 109–143.
Nakamura, T., Wang, T., Sampath, S., 2000. Determination of properties of graded materials by inverse analysis and instrumented indentation. Acta Mater. 48, 4293–4306.
Portier, L., Calloch, S., Marquis, D., Gever, P., 2000. Ratchetting under tension-torsion loadings: experiments and modeling. Int. J. Plasticity 16, 303–335.
Shah, S., Carpinteri, A. (Eds.), 1991. RILEM Report 5. Fracture Mechanics Test Methods for Concrete. Chapman and Hall, London.
Shu, J., Fleck, N., 1998. The prediction of a size-effect in micro-indentation. Int. J. Solids Struct. 35(13), 1363–1383.
Stavroulakis, G., Bolzon, G., Waszczyszyn, Z., Ziemianski, L., 2003. Inverse analysis. In: Karihaloo, B., Ritchie, R., Milne, I. (Eds.), Comprehensive Structural Integrity. Elsevier Science Ltd, London, pp. 685–718.
Suquet, P., 1987. Elements of homogenization for inelastic solid mechanics. In: Sanchez-Palencia, E., Zaoui, A. (Eds.), Homogenization techniques for Composite Media. CISM book, Springer-Verlag, New-York, pp. 194–280.
Swamy, R., Al-Asali, M., 1988. Engineering properties of concrete affected by alkali-silica reaction. ACI Mat. J. 85, 367–374.
Taliercio, A., Coruzzi, R., 1999. Mechanical behaviour of brittle matrix composites: a homogenization approach. Int. J. Solids Struct. 36, 3591–3615.
Tarantola, A., 1987. Inverse Problems Theory. Methods for Data Fitting and Model Parameter Estimation. Elsevier Applied Science, Southampton.
Tarchi, D., Pieraccini, M., Rudolf, H., Leva, D., Luzi, G., Bartoli, G., Atzeni, C, 2000. Structural static testing by interferometric synthetic radar. Comp. Mater. Sci. 33, 565–570.
Tardieu, N., Constantinescu, A., 2000. On the determination of elastic coefficients from indentation experiments. Inv. Probl. Eng. 16, 577–588.
Toropov, V., van der Giessen, E., 1993. Parameter identification for nonlinear constitutive models: Finite element simulation-optimization-nontrivial experiments. In: Pedersen, P. (Ed.), Optimal design with advanced materials. Proceedings of the IUTAM Symposium Lyngby, Denmark, August 18th–20th 1992. Elsevier Science Publishers, New-York, pp. 113–130.
Venkatesh, T., van Vliet, K., Giannakopoulos, A., Suresh, S., 2000. Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extraction. Scripta Mater. 42, 833–839.
Yuan, H., Chen, J., 2001. Identification of the intrinsic material lenght in gradient plasticity theory from micro-indentation tests. Int. J. Solids Struct. 38(46), 8171–8187.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 CISM, Udine
About this chapter
Cite this chapter
Maier, G., Bocciarelli, M., Fedele, R. (2005). Some innovative industrial prospects centered on inverse analyses. In: Mróz, Z., Stavroulakis, G.E. (eds) Parameter Identification of Materials and Structures. CISM International Centre for Mechanical Sciences, vol 469. Springer, Vienna. https://doi.org/10.1007/3-211-38134-1_3
Download citation
DOI: https://doi.org/10.1007/3-211-38134-1_3
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-30151-7
Online ISBN: 978-3-211-38134-2
eBook Packages: EngineeringEngineering (R0)