Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
AISI (1997). Monotonic Tests of Cold Formed Shear Walls with Openings, Prepared by AHB research Center. Inc., The American Iron and Steel Institute.
AISI (1998). Shear Wall Design Guide, Publication RG-9804, AISI.
AISI-American Iron and Steel Institute (2001). North American Specification for the Design of Cold-Formed Steel Structural Members with Commentary, Washington, DC.
Bertero V.V. (1997). Earthquake Engineering. Structural Engineering Slide Library (Golden W.G. Ed.), The University of Berkley. California, USA.
Bertero R.D., Bertero V.V. (1999). Redundancy in Earthquake-resistant Design. Journal of Structural Engineering, ASCE, Vol. 125(1), 81–88.
Calderoni B., De Martino A., Landolfo R., Ghersi A. (1994) On the seismic resistance of light gauge steel frames. Behaviour of Steel Structures in Seismic Areas STESSA’ 94. Ed. by F.M. Mazzolani and V. Gioncu, E&FN Spon, London, ISBN 0-419-19890-3.
Calderoni B., De Martino A., Ghersi A., Landolfo R. (1997) Influence of local buckling on the global seismic performance of light gauge portal frames. Behaviour of Steel Structures in Seismic Areas STESSA’97, Ed. by F.M. Mazzolani and Hyroshi Akiyama, Edizioni 10/17, Salerno, ISBN 88-85651-76-3.
De Martino A., Ghersi A., Landolfo R., Mazzolani F.M. (1992). Calibration of a bending model for cold-formed section. XI th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, 503–511.
Dubina D., Fülöp L., Ungureanu V., Nagy Zs. (2000) Cold-formed Steel Structures for Single Storey Buildings. International Conference on Steel Structures of the 2000’s, 11–13 September 2000, Istanbul, Turkey, 191–196.
Dubina D., Georgescu M., Ungureanu V., Dinu F. Innovative cold-formed steel structures for one storey penthouse superstructure of DATATIM-ALCATEL industrial building. The 9 th Int. Conference on Metal Structures — ICMS’2000, Timisoara, Romania, 19–22 October 2000, 318–326.
Dubina D., Ungureanu V. (2000). Elastic-plastic intercative buckling of thin-walled steel compression members. Proceedings of the 15 th International Specialty Conference on Cold-Formed Steel Structures, Oct. 19–20, 2000, St. Louis, Missouri, USA, 223–237.
Dubina D., Ungureanu V., Georgescu M., Fülöp L. (2001): Innovative cold-formed steel structure for restructuring of existing RC or masonry buildings by vertical addition of supplementary storey. The 3 rd International Conference on Thin-Walled Structures, Cracovia, Poland, 5–7 June 2001, 187–194.
Dubina D., Ungureanu V., Fülöp L., Nagy Zs., Larsson H. (2001): LINDAB Cold-Formed Steel Structures for Small and Medium Size Non-Residential Buildings in Seismic Zones. The 9 th Nordic Steel Construction Conference — NSCC2001, Helsinki, Finland, 18–20 June 2001, 463–470.
Dubina D., Ungureanu V., Nagy Z. (2002). Lightweight steel structures using Lindab cold-formed sections for residential and non-residential buildings, International IASS Symposium on Lightweight Structures in Civil Engineering, Warsaw, Poland, 24–28 June, 2002.
ECCS (1985) Recommended Testing Procedure for Assessing the Behaviour of Structural Steel Elements under Cyclic Loads.
ECCS (1987) European Recommendations for the Design of light gauge steel members. ECCS, Brussels, 1987.
ECCS (1995) European Recommendations for the Application of Metal Sheeting acting as a diaphragm, 1995.
ECCS (1995) European Recommendations for the Application of Metal Sheeting acting as a diaphragm. Pub.88, European Convention for Constructional Steelwork, Brussels.
EUROCODE 3 Part 1.3 (1993) Design of Steel Structures. Part 1.3: Cold-formed Thin Gauge Members and Sheeting, European Committee for Standardisation, 1993.
EUROCODE 3 (2001) EN 1993-1.1 Design of Steel Structures. Part 1.1: General Rules and Rules for Buildings, European Committee for Standardisation, Final Draft.
EUROCODE 3 (2001) pr. EN 1993-1.8 Design of steel structures. Part 1.8: Design of joints. EN 1993-1-3
EUROCODE 3 (Draft of June 2001). Design of Steel Structures, Part 1.3: General Rules, Supplementary Rules for Cold-Formed Thin-Gauge Members and Sheeting, CEN/TC 250/SC3-European Committee for Standardisation, Brussels.
EUROCODE 8 (1998). EN 1998 Design provisions for earthquake resistance of structures, Final Draft.
Fajfar P. (2000) “General definitions and basic relations” Chapter 8.1 in the book “Moment Resistant Connections of Steel Frames in Seismic Areas. Design and Reliability” edited by F.M. Mazzolani, E&FN Spon, London, 2000.
FEMA-273 (1997). NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency, Washington.
Fulop L. (2002) Calibration of an equivalent bracing system for 3D dynamic inelastic analysis of steel framed building structures with dissipative shear walls. International Colloquium Stability and Ductility of Steel Structures, Hungary, Budapest, September 26–28, 2002.
Fulop L., D. Dubina (2002) Performance of wall stud shear walls under monotonic and cyclic loading. International Colloquium Stability and Ductility of Steel Structures, Hungary, Budapest, September 26–28, 2002.
Gad E.F., Chandler A.M., C.F. Duffield, G. Hutchinson. (1999). Earthquake Ductility and Overstrength in Residential Structures, Structural Engineering and Mechanics, 8:4, 361–382
Gad E.F., Duffield C.F. (2000) Lateral Behaviour of Light Framed Walls in Residential structures, 12 th World Conference on Earthquake Engineering.
Ghobarah A. (2001). Performance based design in eartquake engineering: state of development. Engineering Structures 23, Elsevier, 2001, 878–884.
Gianfranco de Matteis. (1998) The Effect of Cladding in Steel Buildings under Seismic Actions, PhD Thesis, Universita degli Studi di Napoli Federico II.
Gianfranco de Matteis, Landolfo R., Mazzolani F.M., Fulop L., Dubina D. (1999). Seismic response of MR steel frames with different connection behaviours, Proceedings of the 6 th International Colloquium SDSS’99, Elsevier, 409–420.
Gioncu V., Mazzolani F. M. (2002) Ductility of seismic resistant structures. Spon Press, London, 2002, ISBN 0-419-22550-1.
Johnston B.G. (1971) Spaced Steel Columns. Journal of the Structural Division, ASCE, Vol. 97, No ST5, p. 1465–1479.
Kawai Y., Kanno R., Hanya K. (1997) Cyclic Shear Resistance of Light-Gauge Steel Framed Walls, ASCE Structures Congress, Poland
Kawai Y., Kanno R., Uno N., Sakumoto Y. (1999) Seismic resistance and design of steel framed houses, Nippon Steel Technical report, No. 79.
Lim J. (2001) Joint effects in cold-formed steel portal frames. PhD Thesis, University of Nottingham, 2001.
Mazzolani F.M., Piluso V. (1996). Seismic design of resistant steel frames, E&FN Spon, London, 1996.
Moldovan A., Petcu D., Gioncu V. (1999) Ductility of thin-walled members. Stability and Ductility of Steel Structures SDSS’99. Ed. by D. Dubina and M. Ivanyi, Elsevier Science, 1999.
Murray N.W., Khoo P.S., (1981) Some basic mechanism in the local buckling of thin-walled steel structures. International Journal of Mechanical Sciences, Vol. 23, No. 12, 1981, 703–713.
Niazi A. (1993). Contribution a l’etude de la stabilite des structures composees de profils a parois minces et section ouverte de type C. PhD Thesis, University of Liege, Belgium.
Ono T., Suzuki T. (1986) Inelastic behaviour and earthquake-resistance design method for thin-walled metal structures. Proceedings on IABSE Coll. On Thin-Walled Metal Structures in Building, Stockolm, 115–122.
Paulay T., Priestley M.J.N. (1992) Seismic Design of Reinforced Concrete and Mansonry Buildings, J. Wiley and Sons, 1992.
Prakash V., Powell G.H.. (1994). Drain-3DX Base program description and user guide, Version 1.10, Department of Civil Engineering, University of California at Berkley.
Rondal J., Niazi M (1990) Stability of built-up beams and columns with thin-walled members. International Colloquium Stability of Steel Structures, Budapest, Hungary.
Salenicovich A.J.et al. (2000), Racking Performance of Long Steel-Frame Shear Walls, Fifteenth Int. Speciality Conference on Cold-Formed Steel Structures, St. Louis, Missouri, Oct. 19–20, 471–480.
Serrette R.L., Hall G., Nygen J. (1996). Shear Wall Values for Light Weight Steel Framing, AISI.
Serrette R.L. (1998). Seismic Design of Light Gauge Steel Structures: A discussion, Fourteenth Int. Speciality Conference on Cold-Formed Steel Structures, St. Louis, Missouri, Oct. 15–16
Schafer B.W., Pekoz T. (1998). Computational modelling of cold-formed steel characterising geometric imperfections and residual stresses, Journal of Constructional Steel Research No. 47(3) P. 193–210.
Serette R.L., Ogunfunmi K. (1996). Shear Resistance of Gypsum-Sheeted Light-gauge Steel Stud Walls, Journal of Structural Engineering, ASCE, 122:4.
Wittaker, G. Hart, C. Rojahn. (1999). Seismic response modification factors, Journal of Structural Engineering 1999:2, 438–443.
Wilkinson T. (1999). The plastic behaviour of cold-formed rectangular hollow sections, PhD Thesis, The University of Sydney, Australia, 1999.
Wong M.F., Chung K.F. (2002) Structural behaviour of bolted moment connections in cold-formed steel beam-column sub-frames. Journal of Constructional Steel Research 58 (2002) 253–274.
Zadanfarrokh F., Bryan E. R. (1992) Testing and design of bolted connections in cold-formed steel sections, Eleventh International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Missouri, USA, October 20–21, 1992.
Zaharia R. (2000) Contributions to the safety study of the cold-formed steel structures, PhD Thesis, The ‘Politehnica’ University of Timisoara, 2000.
Zaharia R., Dubina D. (2000) Behaviour of cold-formed steel truss bolted joints, The IV’th International Workshop on Connections in Steel Structures, Roanoke, USA, October 2000.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 CISM, Udine
About this chapter
Cite this chapter
Dubina, D. (2005). Industrial and Non-residential Buildings. In: Rondal, J., Dubina, D. (eds) Light Gauge Metal Structures Recent Advances. CISM International Centre for Mechanical Sciences, vol 455. Springer, Vienna. https://doi.org/10.1007/3-211-38023-X_8
Download citation
DOI: https://doi.org/10.1007/3-211-38023-X_8
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-25258-1
Online ISBN: 978-3-211-38023-9
eBook Packages: EngineeringEngineering (R0)