Abstract
In order to master the constraints of an effective life cycle management, all kinds of data and information concerning the actual machine behavior need to be available. Latest developments in information and communication technologies allow a “look inside” the machine to visualize its actual status. This paper will establish a performance controlling system, including a fleet management system, to gain competitive advantages in manufacturing by focusing on the entire product life cycle.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
27.8 References
Seliger, G., 1997, “More use with fewer resources — a contribution towards sustainable development,” In: Krause, F.-L., Seliger, G., Life Cycle Networks: Proceedings of the 4th CIRP International Seminar on Life Cycle Engineering, 26–27 June 1997, Berlin, Germany, Chapman and Hall, London.
Zülch, G., Schiller, E.F., Müller, R., 1997, “A disassembly information system,” In: Krause, F.-L., Seliger, G., Life Cycle Networks: Proceedings of the 4th CIRP International Seminar on Life Cycle Engineering, 26–27 June 1997, Berlin, Germany, Chapman and Hall, London.
Brissaud, D., Tichkiewitch, S., 2001, “Product models for life-cycle,” In: CIRP Annals Manufacturing Technology, Vol. 50(1), pp. 105–108.
Seliger, G., Grudzien, W., Zaidi, H., 1999, “New Methods of Product Data Provision for a Simplified Disassembly,” In: Proceedings of the Life Cycle Design’ 99, June 1999, Kingston, Canada.
Feldmann, K., 2002, “Integrated Product Policy — Chance and Challenge,” 9 th CIRP International Seminar on Life Cycle Engineering, April 9–10, 2002, Erlangen, Germany, Bamberg: Meisenbach.
Tichkiewitch, S., Brissaud, D., 2001, “Product models for life-cycle,” CIRP Annals Manufacturing Technology, Vol. 50/1, pp. 105–108.
Feldmann, K., Trautner, S., Meedt, O., 1999, “Computer Based Design for Recycling and Disassembly Planning,” Proc. of 6th International Seminar on Life Cycle Eng. June 21–23 1999, Queen’s Univ., Kingston, Canada.
Jackson, P., Wallace, D., Kegg, R., 1997, “An analytical method for integrating environmental and traditional design considerations,” Annals of the CIRP, Vol. 46/1, pp. 355–360.
Gu, P., Hashemian, M., Sosale, S., 1997, “An integrated modular design methodology for life cycle engineering,” Annals of the CIRP, Vol. 46/1, pp. 71–74.
Birkhofer, H., Schott H., 1995, “Development of Environmentally Friendly Products — Methods, Material and Instruments,” In: Jansen, H., Krause, F.-L., Life cycle Modelling for innovative Products and Processes, Proceedings on life cycle modelling for innovative products and processes, November / December 1995, Berlin, Germany, Chapman & Hall, pp. 432–443.
Anderl, R., Daum, B., John, H., Pütter, C., 1997, “Cooperative Product Data Modelling,” In: Krause, F.-L., Seliger, G., Life Cycle Networks: Proc. of the 4th CIRP Int. Seminar on Life Cycle Eng., 26–27 June 1997, Berlin, Germany, Chapman and Hall, London, pp. 435–446.
Krause, F.-L., Kind, C., 1995, “Potentials of information technology for lifecycle-oriented product and process development,” In: Jansen, H., Krause, F.-L., Life Cycle Modelling for Innovative Products and Processes, Proc. on life-cycle modelling for innovative products and processes, Berlin, Germany, November/December 1995, Chapman & Hall, pp. 14–27
Kimura, F, 2000, “A Methodology for Design and Management of Product Life Cycle Adapted to Product Usage Modes,” The 33rd CIRP Int. Seminar on Manufacturing Systems, 5–7 June 2000, Stockholm, Sweden.
Anderl, R., Daum, B., John, H., 2000, “Produktdatenmanagements zum Management des Produktlebenszyklus,” In: ProduktDatenManagement 1, pp. 10–15.
Arai, T., Aiyama, Y., Maeda, Y., Ota, J., 2000, “Agile Assembly System by “Plug & Produce”,” Annals of the CIRP, Vol. 49/1, pp. 1–4.
Berger, R., Krüger, J, Neubert, A., 1998, “Internet-basierter Teleservice,” In: Industry Management, Vol. 6/98, GITO-Verlag, Berlin, Germany.
Niemann, J., 2003, “Life cycle management-das Paradigma der ganzheitlichen Produktlebenslaufbetrachtung,” In: Bullinger, Hans-Jörg (Hrsg.) u.a.: Neue Organisationsformen im Unternehmen: Ein Handbuch für das moderne Management. Berlin, Springer, pp. 813–826.
Brussel, H. van, Valckenaers, P. (Hrsg.), 1999, “Intelligent Manufacturing Systems,” Proc. of the 2nd Int. Workshop on Intelligent Manuf. Systems, September 22–24, 1999, Katholieke Universiteit Leuven, Leuven, Belgium.
Westkämper, E., 2000, “Technical Intelligence for Manufacturing,” In: Cochran, David S. (Hrsg.) u.a., CIRP u.a.: The Third World Congress on Intelligent Manufacturing Processes & Systems: Proc.; June 28–30, 2000, Cambridge, Massachusetts, USA, pp. 411–420.
Kemminer J., 1999, Lebenszyklusorientiertes Kosten-und Elösmanagement, Gabler Verlag Wiesbaden.
Westkämper, E., Niemann, J., 2002, “Life Cycle Controlling for Manufacturing Systems in web-based environments,” In: CIRP u.a., CIRP Design Seminar Proceedings, 16–18 May, 2002, Hong Kong, China.
Dowie, T., Simon, M., Fogg, B., 1995, “Product disassembly costing in a life cycle context,” Proc. of the Int. Conf. on Clean Electronics Products & Tech. (CONCEPT), IEE Conf. Publication.
Trender, L., 2000, “Entwicklungsintegrierte Kalkulation von Produktlebenszykluskosten auf Basis der ressourcenorientierten Prozesskostenrechnung,” In: wbk Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. Bd. 98, Karlsruhe.
Westkämper, E., Osten-Sacken, D.v.d., 1998, “Product Life Cycle Costing Applied to Manufacturing Systems,” Annals of the CIRP, Athens, Greece, Vol. 47.
Kirk, S.J., Dell’Isola, A.J, 1995, “Life Cycle Costing for design professionals,” In: Siegwart, H., Senti, R., Prod. Life Cycle Management, Die Gestaltung eines integrierten Produktlebenszyklus, Schäffer Poeschel Verlag, McGraw-Hill, Inc.
Schimmelpfeng, K., 2002, Lebenszyklusorientiertes Produktionssystemcontrolling, Deutscher Universitäts-Verlag GmbH, Wiesbaden, zugl. Habilitationsschrift Universität Hannover.
Niemann, J., 2003, “Ökonomische Bewertung von Produktlebensläufen — Life Cycle Controlling,” In: Bullinger, Hans-Jörg (Hrsg.) u.a.: Neue Organisationsformen im Unternehmen: Ein Handbuch für das moderne Management. Berlin u.a., Springer, pp. 904–916.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer-Verlag London Limited
About this chapter
Cite this chapter
Niemann, J., Westkämper, E. (2006). Life Cycle Product Support in the Digital Age. In: ElMaraghy, H.A., ElMaraghy, W.H. (eds) Advances in Design. Springer Series in Advanced Manufacturing. Springer, London. https://doi.org/10.1007/1-84628-210-1_27
Download citation
DOI: https://doi.org/10.1007/1-84628-210-1_27
Publisher Name: Springer, London
Print ISBN: 978-1-84628-004-7
Online ISBN: 978-1-84628-210-2
eBook Packages: EngineeringEngineering (R0)