Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
4.9 References
Pires, JN, and Loureiro, A et al, “Welding Robots”, IEEE Robotics and Automation Magazine, June, 2003
Pires, JN, and Loureiro, Altino et al, “Object-Oriented and Distributed Software applied to Industrial Robotic Welding”, Industrial Robot, An International Journal, MCB University Press, March 2002.
Olsson M, “Simulation and execution of autonomous robot systems”, Ph.D. thesis, Devision of Robotics, Department of Mechanical University, Lund Institute of Technology, Lund University, Sweden, 2002.
Yu, JY, Na, SJ, “A Study on Vision Sensors for Seam Tracking of Height-Varying Weldment. Part1: Mathematical Model”, Elsevier Mechatronics Journal, Vol, 7, No 7, pp. 599–612, 1997.
Yu, JY, Na, SJ, “A Study on Vision Sensors for Seam Tracking of Height-Varying Weldment. Part2: Applications”, Elsevier Mechatronics Journal, Vol, 8, No 1, pp. 21–36, 1998.
Bolmsjo G., “Sensor System in Arc Welding”, Technical Report, Lund Institute of Technology, Production and Materials Engineering Department, 1997.
Agren B. “Sensor Integration for Robotic Arc Welding.” PhD thesis, Lund University, 1995
Smartt HB et al, “Intelligent Control of Modeling Welding Cell”, Proceedings of the ACM 6th International Conference on Trends in Welding Research, Pine Mountain, USA, April 2002.
Bolmsjo G, et al, “Off-line programming of GMAW robotic systems — a case study”, International Journal for the Joining of Materials, Vol.9, No3, pp.86–93, 1997.
Fridenfalk M, “Development of intelligent robot systems based on sensor control”, Ph.D. thesis, Division of Robotics, Department of Mechanical University, Lund Institute of Technology, Lund University, Sweden, 2003.
Ericsson M, “Simulation of robotic TIG-Welding” Department of Technology, University of Trollhättan (Uddevalla), Trollhättan, Sweden, 2003.
Cook, GE, “Robotic Arc Welding: Research in Robotic Feedback Control”, IEEE Transactions on Industrial Electronics, Vol. 30, No 3, August 2003.
Loureiro A., Velindro M. and Neves F., “The influence of Heat Input and the Torch Weaving Movement on Robotized MIG Weld Shape”, International Journal for the Joining of Material, Vol.10, N.3/4, pp. 86–91,1998.
Bolmsjö G., Olsson M., Nikoleris G., and Brink K. Task programming of welding robots. In Proceedings of the Int. Conf. on the Joining of Materials, JOM-7, pages 573–585, May–June 1995.
Richardson RW, “Robotic Weld Joint Tracking Systems-Theory and Implementation Methods”, Welding Journal, Nov. 1986.
Books B., “Welding Robots-The State of the Art”, Welding and Metal Fabrication, June 1991.
Drews P., Starke G., “Development Approaches for Advanced Adaptive Control in Automated Arc Welding”, Internal Report XII-970, Mechatronics Deartment, Achen, Germany, 1986.
Yada Y. et al, “Development of Real Time Welding Control System by Using Image Processing”, Internal Report XII-998, Mechatronics Department, Achen, Germany, 1986.
Proceedings of the International Workshop on Robotic Welding Systems and Process Monitoring (http://robotics.dem.uc.pt/welding/), Coimbra Portugal, January 2001, published at the Journal Robótica, January 2001.
Boillot, JP et al, “The Benefits of Vision in Robotic Arc Welding”, ServoRobot Inc., http://www.servorobot.com, February, 2002.
Sicard, P, Levine, MD, “An Approach to an Expert Robot Welding System”, IEEE Transactions on Systems, Man and Cybernetics, Vol. 18, No 2, March/April, 1988.
Miller, M et al, “Development of automated real-time data acquisition system for robotic weld quality monitoring”, Elsevier Mechatronics, Vol 12, pp. 1259–1269, 2002.
Bolmsjö G., “Knowledge Based Systems in Robotized Arc Welding. Knowledge Based Systems-Advanced Concepts”, Techniques and Applications, (Spyros Tzafestas, editor). Chapter 17, pp. 465–495. World Scientific, ISBN 9810228309, 1997.
Magy E, Haidegger G, Object-Oriented Approach for Analyzing, Designing and Controlling Manufacturing Cells, Proceedings of AUTOFACT’93, Chicago, 1993.
Li, L, Object-Oriented Modeling and Implementation of Control Software for a Robotic Flexible Manufacturing Cell, Robotics and Computer Integrated Manufacturing, 1994.
Dahlén P. and Bolmsjö G., “Human Factors in the Justification of Advanced Manufacturing Systems”. International Journal of Human Factors in Manufacturing, 6(2):147–162, 1996.
Fahim, Choi K, “The UNISET approach for the Programming of Flexible Manufacturing Cells”, Robotics and Computer Integrated Manufacturing, 1998.
OAEnterprise, Object Automation Inc (http://www.oa.com), 1999.
Osaca Arquictecture, Osaca organization, (http://www.osaca.org), 2001.
Factory Suite A2, WonderWare Inc. (http://www.wonderware.com), 2004
Iwanitz F, Lange J, “OPC-Fundamentals, Implementation and Application”, Hüthig Fachverlag Editora and OPC-Foundation, 2005
Bloomer J., “Power Programming with RPC”, O’Reilly & Associates, Inc., 1992.
Cover D, Stevens D, “Internetworking with TCP/IP”, Vol I to III, Prentice Hall, 2nd Edition, 1998.
Halsall F., “Data Communications, Computer Networks and Open Systems”, Third Edition, Addison-Wesley, 1992.
Rogerson D., “Inside COM”, Microsoft Press, 1997.
Box D., “Essential COM”, Addison-Wesley, 1998
“Introduction to OSF DCE, OSF DCE”, Open Software Foundation and Prentice Hall, 1995.
RAP, Service Protocol Definition, ABB Flexible Automation, 1996–2004.
Pires JN, Sá da Costa JMG, “Object Oriented and Distributed Approach for Programming Robotic Manufacturing Cells”, IFAC Journal on Robotics and Computer Integrated Manufacturing, February 2000.
Sá da Costa, JMG, Pires, JN, “Future Welding Robot Developments”, Journal Robótica, no41, January 2001.
Pires, JN, “Complete Robotic Inspection Line using PC based Control, Supervision and Parameterization Software”, Elsevier and IFAC Journal Robotics and Computer Integrated Manufacturing, Vol. 21, No1, 2005
Microsoft Studio. NET 2003, TechNet On-line Documentation, Microsoft Corporation, http://www.microsoft.com, 2003.
ABB IRC5 Documentation, ABB Flexible Automation, 2005.
ABB IRB1400 Users Manual, ABB Flexible Automation, 2005.
The Welding Institute, “Standard Data for Arc Welding”, Abington Hall, Abington, UK.
Rights and permissions
Copyright information
© 2006 Springer-Verlag London Limited
About this chapter
Cite this chapter
(2006). Robotic Welding: System Issues. In: Welding Robots. Springer, London. https://doi.org/10.1007/1-84628-191-1_4
Download citation
DOI: https://doi.org/10.1007/1-84628-191-1_4
Publisher Name: Springer, London
Print ISBN: 978-1-85233-953-1
Online ISBN: 978-1-84628-191-4
eBook Packages: EngineeringEngineering (R0)