Abstract
In this paper, three generations of natural graphite are described in order to show the evolution in understanding of which physical and electrochemical requirements are needed to make usable graphite for practical lithium-ion batteries. Of the three alternative types of carbonaceous materials discussed in the paper, the optimum has been found to be natural graphite. Its behavior has been compared with the behavior of graphitic mesophase carbon microbeads and hard carbon materials. The comparison allowed summarizing key guidelines to design new generations of active materials. The capacity, irreversible capacity loss, rate capability, safety and packing density are some of the key characteristics, we concluded, are essential when developing new generations of high packing density andlow surface area graphitic carbons.
Keywords
- Carbonaceous Material
- Irreversible Capacity
- Hard Carbon
- Typical Scan Electron Microscope Image
- Irreversible Capacity Loss
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
REFERENCES
Hossain, Sohrab. Rechargeable Lithium Batteries (Ambient Temperature). In Handbook of Batteries, David Linden ed., New York, N.Y., 36.1–36.77, 1995.
Winter M., Novak P. and. Monnier A. Graphites for Lithiumion Cells: The Correlation of the First-Cycle Loss with the Brunauer-Emmett-Teller Area. J. Electrochem. Soc., 145, 428–435 (1998).
Lithium Batteries. E. Peled, J.P.Gabano, eds., Chap 3, 43–69 Academic Press, London (1983).
Naji A., Willmann P., and Billaud D. Electrochemical Intercalation of Lithium into Graphite: Influence of the Solvent Composition and the Nature of the Lithium Salt. Carbon, 36, 1347–1352 (1998).
Endo E., Tanaka K. and Seika K. Initial Reaction in the Reduction Decomposition of Electrolyte Solutions for Lithium Batteries, J. Electrochem. Soc., 147, 4029–4033 (2000).
Henriksen G. Advanced Process Research: Overview/Advances./ Proceedings of the Annual Merit Review Meeting of the U.S. DOE ATD Program, Argonne, IL, (8/2001).
Cao F., Barsukov I.V., Bang H.J., Zaleski P. and Prakash J. Evaluation of Graphite Materials as Anodes for Lithium-Ion Batteries. J. Electrochem Soc. 147 (10), 3579–3583 (2000).
Barsukov I.V. Development of low-cost, novel carbonaceous materials for anodes in lithium-ion rechargeable batteries - Superior Graphite Co. Snapshots of CARAT (Cooperative Automotive Research for Advanced Technology) Projects. Publication of OAAT & OTTEE&RE, U.S. Department of Energy, 9/2001, 26–27.
Barsukov I.V. Development of low-cost, carbonaceous materials for anodes in lithium-ion batteries - Superior Graphite Co. Snapshots of CARAT (Cooperative Automotive Research for Advanced Technology) Projects. Publication of Office of FreedomCAR and Vehicle Technologies, EERE, U.S. Department of Energy, 5/2003, 22–23.
Battery R&D Equipment. Hohsen Corp. product catalog. Tokyo, Japan (2002), 1.
Zheng, L., Zhong Q., and Dahn J.R. High-Capacity Carbons Prepared from Phenolic Resin for Anodes of Lithium-Ion Batteries. J. Electrochem. Soc., 142, 211–214 (1995).
Dahn J.R., Zheng L., Liu Y. and Xue J.S. Mechanism for Lithium Insertion in Carbonaceous Materials, Science, 270, 590–593 (1990).
Billaud D., Henry F.X. and Willmann P. Electrochemical Synthesis of Binary Graphite-Lithium Intercalation Compounds. Mat. Res. Bull., 28, 477–483 (1993).
Billaud D., Henry F.X., Lelaurain M., and Willmann P. Revisited Structures of Dense and Dillute Stage II Lithium-Graphite intercalate Compounds. J. Phys. Chem Solids, 57, 775–781 (1996).
Joho F., Novak P., and Spahr M.E. Safety Aspects of Graphite Negative Electrode Materials for Lithium-Ion Batteries. J. Electrochem. Soc., 149, 1020–1024 (2002).
Amine K., Liu J., Belharouak I. and Kahaian A. Material screening from and with suppliers. In Chapt. Overview of cost reduction and Technology Transfer Efforts. Proc. Of the Advanced Technology Development Program, U.S. DOE FreedomCAR annual merit review meeting, June 24–25 (2003) Argonne National Laboratory, Argonne, IL, USA, P.8.
Liu J., Vissers D.R., Amine K., Barsukov I.V., Doninger J.E. Surface Treated Natural Graphite as Anode Material for High-Power Li-Ion Battery Applications. In New Carbon-Based Materials for Electrochemical Energy Storage Systems: Batteries, Fuel Cells and Supercapacitors. Barsukov I., Johnson C., Doninger J., Barsukov V. eds. NATO ARW series Volume. Springer (2005) - in this book.
Barsukov I., Henry F., Doninger J., Gallego M., Huerta T., Girkant R. and Derwin D. On the electrochemical performance of lithium-ion battery anodes based on natural graphite with various surface properties. ITE Letters on Batteries, New Technologies & Medicine, V.4, N.2 (2003), 163–166.
Kohs W, Santner H.J., Hofer F., Schröttner H., Doninger J., Barsukov I., Albering J.H., Möller K.-C., Besenhard J.O., and Winter M. A study on electrolyte interactions with graphite anodes exhibiting structures with various amounts of rhombohedral phase. J. Power Sources, 199–121, 528–538 (2003).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
Henry, FX. et al. (2006). NEW DEVELOPMENTS IN THE ADVANCED GRAPHITE FOR LITHIUM-ION BATTERIES. In: Barsukov, I.V., Johnson, C.S., Doninger, J.E., Barsukov, V.Z. (eds) New Carbon Based Materials for Electrochemical Energy Storage Systems: Batteries, Supercapacitors and Fuel Cells. NATO Science Series II: Mathematics, Physics and Chemistry, vol 229. Springer, Dordrecht. https://doi.org/10.1007/1-4020-4812-2_16
Download citation
DOI: https://doi.org/10.1007/1-4020-4812-2_16
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-4810-4
Online ISBN: 978-1-4020-4812-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)